A Rewind: How People Talked About Pvc Window Hinges 20 Years Ago Upvc Window Hinges Replacement

Do you find it difficult to close or open your windows or do they have a gap in the corner? This could be due to faulty window hinges that need to be fixed.

Most double glazing manufacturers sell standard window friction hinges, referred to as "friction stays". However, the right size hinge has to be fitted in order to ensure that they are functional.

Track Width

Window hinges in a variety of lengths. To make sure you have the correct size hinges for your window, take a measurement of the length of the hinge and where it joins the frame (see the left measurement Click to expand). You can also measure the distance between the bottom arm and the top arm of your hinge by opening the window. This is called the height of the stack. You can then compare this to the standard hinge sizes available.

The most frequent cause of an unsatisfactory window hinge made of upvc is the fact that the wrong size has been fitted. It can be caused by installing the wrong kind or not leaving enough space for the cockspurs to sit back in the frame. Other reasons include not lubricating the hinges frequently or repeatedly opening and closing the window.

It is relatively simple to replace the window hinges, however it requires careful planning. The most important part of the task is to ensure you have two people who are capable of supporting the weight of the window whilst the hinges are attached to the frame. This is especially crucial if you're replacing hinges on an oversized window or a large glazed door.

When ordering and installing upvc window hardware, there are a few other factors to consider. You will need to consider the window orientation (or handing in the case of restrictor hinges) and the type of hinge, the height of the stack and the track width. The step-by-step directions and prompts on each page of upvc hinges make it easy to identify the required specifications.

Contact how to replace a hinge on a double glazed window for any questions regarding the various types of hinges for windows or how to replace a Upvc window hing. We're always ready to assist.

Hinge Thickness

Window hinges are an essential component of any uPVC window. They offer an easy operation and are durable and are often adjustable to allow fine-tuning of the window's position. These unassuming mechanisms are intricate and complex, and require precise engineering to operate correctly.

It is essential to make use of the correct type and size of hinges for your uPVC frames when installing new ones or replacing old ones. This will prevent them from becoming too loose or tight which can cause your window to rattle and not be able to open or close properly.

You'll require a screwdriver to remove the hinges that are in place, a tape measure, pens or markers, calipers, and paper to take measurements. These tools will let you complete the job quickly and accurately.

If you have uPVC hinges that have left gaps in the corners of your frame, it is most likely because they were opened incorrectly. This caused them to be placed too low. To prevent this from happening make sure that you open the hinges in the opposite direction of the arrow and ensure that the top of each hinge is put into the corner of the cap.

The kind of hinge you choose to use can affect how the window opens A side-hung hinge will only open on the right and left sides while a top hung hinge opens on both the top and bottom. Some hinges also restrict the opening of the window, which is helpful to ensure safety in families with children.

There are many different types uPVC uPVC windows hinges to select from. These hinges include standard window hinges, restrictor hinges, and Egress hinges, all of which are specifically designed for applications. With such a wide array of options, it is crucial to select the correct hinges for your uPVC windows to ensure that they operate smoothly and efficiently.

Hinge Length

The window hinges are very simple, but they can become damaged or worn out over time. With the proper tools they can be replaced in less than 10 minutes. If you follow the directions on the website and have all the necessary information available (including the correct size of the upvc hinge) then the whole operation can be completed easily. Be sure to have a second person to hold the window.

If the window doesn't open or close properly it is usually due to incorrectly fitted hinges. The hinges must be properly opened and positioned to the right side of the window (depending on the type - see the guide for more details). Hinges are easy to install, but it's recommended to refer to the instructions before beginning, and also confirming with Technical Support prior to ordering to confirm that the hinges you purchase are the correct ones.

There are three kinds of hinges made from upvc which are standard hinges, restor hinges and fire escape hinges. The only difference between them is that the fire escape hinges allow for an open 90 degrees and conform to Approved Document B in UK Building Regulations. Restrictor hinges allow an opening that is smaller, but still provide ventilation. They can be put in on both side and top hanging windows.

The most important factors to take into consideration when determining the correct size of the hinge for your upvc window is the track's outer width (18mm for H01) as well as the thickness of the hinge (13mm or 17mm) and the length of the arm (flat is 13mm, the kinked 17mm). Make sure to use the first hole on the track or the arm that is closest to the original. If the holes do not line with the new hinges, they can be re-spotted with a screw repair kit (available on the website) to fill in the original holes and ensure a perfect fit.

After the new hinges have been installed and the window casement is closed they must be tested to confirm that the weight is within specifications for each size. This can be done by dropping the opening window onto a set of bathroom scales. If the weight is higher than specified, then reinforcement may be required.

Friction Stay Track Length

There are many different types of friction stay hinges that are available for upvc windows. There are three kinds of hinges that are standard hinges for windows (also known as restrictor hinges), easy clean hinges as well as standard window hinges. These hinges are designed to provide various benefits to the user. They are simple to install and provide durability, safety, and security. These hinges can be mounted on double-glazed or aluminum window frames. They are available in different sizes, stack heights and track widths.

To determine what size of friction stay you need begin by measuring the distance between the bottom arm and the top arm of the window hinge. This is the stack height, and it is important to take care when measuring. The stack height of the window hinge must be roughly equal to the width of the track. Then choose a window hinge with a track the same width as your original track.


There are friction stops that limit the opening of windows made from aluminium or upvc. These hinges have a mechanism which limits the opening of the window. This is helpful to improve child safety at home. These hinges are ideal for windows in high-rise buildings or windows that are fire escapes.

Besides providing safety and security These kinds of window hinges are designed to offer an easy operation. These hinges are made from strong materials to withstand the weight of the window and its movements. They also have an elegant design that is easy to install and doesn't require any special tools.

Replacing windows made of upvc hinges is easy however, it's important to know what type you need before you start. If you're unsure what type you need, our technical team is here to assist. They will be able to advise you on what is needed for your particular windows. They are able to answer your questions and help you select the appropriate hinges for your home. They can even send you a photo of your existing hinges to help you determine the type of hinges you require.