The Most Hilarious Complaints We've Heard About Door Repairs Near Me Door Repairs Near Me

Every home requires door repairs. They serve as a way to enter and exit our homes. They also help secure the home. Door repair professionals can help ensure that the doors work correctly while improving the overall appearance of the home.

Enter your zip code to find pros rated and reviewed close to you.

Broken Glass

Broken glass is an issue that can be found in a variety of homes and businesses. It can be caused by a range of things, such as kids throwing baseballs into windows or a person knocking a mirror off the wall. Whatever the cause is it's always frustrating and inconvenient to face broken glass.

The most important thing to do is pick up the broken pieces and dispose of them properly. This is essential because broken glass, particularly when it has shattering into small pieces, can be dangerous. Glass can cause lacerations and cut the skin like razors, sharp needles, or knives. It could also pose an ailment for health because it is contaminated by toxic chemicals and infectious agents.

Cracked glass can be repaired with Bostik Fix & Glue. This adhesive can be used to repair glass items with small cracks from impact like picture frames windows, panes of glass, door sidelights mirrors, kitchen glassware. It can also be used to repair single-pane windows and some automotive glasses. To ensure that glue sticks cracks, they must be clean and dry.

The adhesive can be applied using a fine nozzle and the areas to be repaired need to be gently pressed. This will enable the adhesive to bond quickly and stop the cracks from spreading. It's important to remember that even if the cracks are less visible they'll remain visible. It's also important to stay clear of extreme temperature fluctuations as the cracks may expand and contract, leading to further damage.

Broken Locks

If your lock fails to function properly, it can leave your home vulnerable to burglars. If you own a home DIY repair kit, you can fix broken locks yourself without needing to engage an expert. First, you need to determine the cause of the issue. There are a variety of possible causes which could cause problems, such as mechanical misalignment and a broken key. It is essential to have an unrepaired lock fixed as quickly as possible prior to it causing further problems.

If you can turn the key in the lock but it won't remain in, you'll need to replace the latch bolt or the lock cylinder itself. It's also an excellent idea to examine the hinges and frame of the door to ensure they're not loose or damaged and this could be another cause of the broken lock.

A jiggly lock means that the bolt isn't forming or leaving the strike plate within the frame in a proper manner. You can fix this issue by moving the strike plate slightly. Be careful not to move it too far. If you move the strike plate too much, the holes for setting screws on the plate will be too large. This can result in an unstable lock.


If you've got dust or rust in the keyway, it is likely that the key won't move. Apply a lubricating solution to allow the key to move freely. You can also try dry lubricants like graphite powder.

A spinning lock indicates that the tailpiece inside the lock's interior has broken. This is usually an inexpensive part to buy from an locksmith, and it can be repaired in a few minutes.

A bent key is a major security risk, as it could snap off inside the lock and prevent you from opening your door. To solve this issue you can make use of a vise to flatten the key and reshape it. If you don't own an instrument to help you, you could use a hammer to pound the key between two pieces of wood. This will reduce the size of the key and improve its ability to fit into the lock.

Broken Rollers

Rollers are responsible for keeping your door properly aligned If they're damaged, it can cause the door to run off the track. However, replacing RepairMyWindowsAndDoors can be a relatively easy home repair task for many homeowners. First, take the sliding panel of the door from its track, and then set it aside for now.

Find the screws for adjustment of the roller on the bottom of the door frame and loosen them. Then, you can lift the door and remove the broken roller. It is a good idea to mark the location where the old roller was to ensure that the new one is placed in the same spot.

Remove the roller and inspect it for any damage. If you see that the roller is bent then try to bend it back into place with a pair of metal bent pliers. If you are unable to bend the roller back into place it could be necessary to replace it entirely. Install the new roller following the same steps as you did to remove the old one.

While you're there, you might also think about lubricating the rollers. This will reduce friction, making it easier to move the door smoothly. Make sure to use an oil-based lubricant that is not petroleum-based, as petroleum-based ones tend to attract dirt faster.

Once you're done, carefully lower the doors back onto the track. Be sure that all of the screws or bolts that you removed are returned to their proper positions and that all the parts are aligned correctly. Also, ensure that you adjust the roller's height when necessary. It should be at or just above the threshold so that the door doesn't hit it, but still allows the door to roll up.

After a few attempts After a few tries, you should be able to get the roller replaced and have your door operating smoothly once more. If you're not sure of your ability to finish the job, it's always best to consult an expert. It's much easier for a professional to examine the problem and determine the best course of action.

Broken Hinges

Over time, the weight of a door may cause the hinges to become loose. This is especially the case if the screws in the frame of the door have been smashed. This is a typical issue that can be easily repaired with just a little effort. To fix the issue, you can use a simple procedure that involves drilling out the old screw and using dowels to fill the hole before putting in the new screw.

This method is particularly beneficial for wooden frames and is a better choice instead of trying to tighten long screws in the stripped hole. Long screws could cause further damage to the wood. This method permits the use of dowels the same size as the holes, which provide a stronger and secure fix.

You should check the size of the screw before making a new hole. This can be achieved by using a spirit level to verify the location of the screw. Once you have found the screw hole, you can take off the screw. It shouldn't be a problem because the screw holes will often be enlarged by the screws.

Then, determine the thickness of your door jamb. Cut lengths of dowels made of hardwood that are a bit shorter than the measurement. After the dowels have been cut, they can be inserted in the hole of the new screw. Carpenter glue should then be applied to both sides.

After the glue has had the chance to dry, it is then time to drill the new screw into the dowel and the hinge hole. Once the screw has been installed it is crucial to allow the dowel to fully tighten.

To help prevent future issues in the future with your door hinges, it is recommended to spray them down with the lubricant regularly. This will stop them from becoming stuck in either the open or closed positions. You can purchase lubricant for door hinges at your local home improvement shop.