5 Broken Car Key Repair Tips You Must Know About For 2024 Tips For a Broken Car Key Repair

A key breaking in the ignition can be extremely difficult. To avoid further damage, do not forcefully turn the key.

Get professional help as quickly as you can. A locksmith will be able to remove the broken piece without causing more damage. In the meantime, you can find another method to travel by taking the bus or getting an ride from your friend.

Assessing the damage

A damaged car key can be a real inconvenience. It can prevent you from getting to where require to go, cause you to lose time and money and could even result in costly repairs for your vehicle. This is why it's crucial to keep a few useful suggestions for a car that is damaged crucial repair in mind so that you can repair the issue quickly and efficiently.

First of all, do not try to remove a broken key by yourself. This can worsen the problem and damage your lock or the ignition cylinder. Modern locksmiths have the equipment to remove a damaged car key without causing additional damage.

Whether it's due to wear, damage, or simply mishandling, there are many reasons for your car key to break. The key could wear out and no longer fit into the ignition. This can be due to normal usage or being exposed to extreme weather conditions.

A blockage in the keyway or ignition cylinder can cause your car key to break. This could be due to dirt or debris that accumulated over the years and obstructed the grooves of your key. If you have an electronic key that has modern functions, the issue could also be caused by problems with the battery or with the way your car connects to the keys.

If your car key breaks in the door lock or ignition, it's best to call a professional locksmith right away. It is best to avoid damaging the car by trying to force the key out.

Super glue isn't the most effective method of repairing your car keys. This will likely fail after a few uses and won't be as effective as a professional tool from a professional locksmith. Make use of a strong wire or nail to close the broken loop. If you can you can drill a hole at each end of the wire or nail to key width, then apply glue to both holes. Allow it to dry completely before you use the key.

Removal of the damaged part

You can remove a broken car key from the door lock. However, you should be very careful to avoid damaging the lock further. You can accomplish this by using a set of needle nose pliers as well as penetrating oils. A jigsaw with teeth facing downwards can be used to secure onto the broken piece inside the lock and then pull it out at an angle. Avoid twisting car key repair cost because this can cause it to break off completely or cause damage to the ignition cylinder.

If the key is damaged inside the lock, you'll have to call a locksmith for an exchange or visit your dealer. If the damaged piece is large enough to be able to be retrieved using pliers, it might be possible. Avoid turning the key using pliers or screwdrivers, since you could cause the key to break or cause damage to the lock and ignition.

For a more permanent solution, you can try using super glue to close up the broken plastic loop on your key. Be sure to use a gel-type glue and not just a runny one, and let it dry before putting the key into the lock. This is not a good method because a mistake could easily lead to misalignments that cause damage to the lock or ignition system and result in more costly repairs later on.

You can make use of a long piece of wire or a finishing nail to replace the loop that your car keys have. Make use of a drill for two holes in the broken plastic loop for each end of the wire or nail. Cut the wire or nail to the same length as your key, then apply tiny amounts of super glue to each hole. Slide the wire or nail into the holes to close the broken loop on your key.

The fact that you keep the broken pieces of your car key will make it easier for a locksmith to make a precise copy. This will reduce the chances of issues with the new key and save you time and money.

Getting a New Key

Sometimes car keys break in the way that it becomes impossible to start the vehicle. This can happen when you use too excessive pressure when turning the key, and it snaps into the ignition. This can occur if you use the key fob to open the door, and it becomes stuck. You'll need a locksmith assist you if this happens.

It's a huge trouble to have a damaged key in your ignition because you're unable to use your car until the issue is fixed. The key is used for turning the car on and off the ignition, as well as opening the doors and activating other features. Fortunately, there are some steps you can do to fix the broken key in the ignition before it develops into an issue that is more serious.

You should first try to remove the broken portion of your key by using pliers. If you're lucky your car key might have broken at the top of the lock and will be easy to pull out of the lock. If the key broke at the bottom of the lock, you will have more difficulty removing it on your own and will need to use some specially designed tools. These tools are flat and narrow and have small hooks at the ends that bind onto the key fragment and pull it away. You may also try using a lubricant, such as liquid or powder, to loosen up the key and make it easier to remove.

Another option is to call a mobile locksmith to visit and replace your broken key. This is usually less expensive than visiting a dealership and can save your time. They can also design a key that matches the current key on your car that is essential for newer vehicles with programmable chips.

You can also try to attach the two pieces of your key with super glue. This is a risky option however it may work. Be careful not to get the key stuck in the lock or ignition.

Programming the New Key

You may not be able to change your key yourself, depending on the model. This can only be done by an authorized locksmith or dealer because it protects your vehicle's security from unauthorized access. This is a necessity that prevents people from using different keys to start your car and potentially steal it. It does complicate the process particularly when the fob has to be replaced.

In a hurry it's easy to use too much pressure when turning the key to unlock or lock your vehicle. The key could be damaged or stuck in the lock if you use too excessive force. broken car key repair could also be stuck in the ignition, which can prevent you from starting your car. This can be frustrating and throw your schedule off. There are a few solutions to address this issue before it becomes too big of a problem.

In certain situations you can get rid of a broken key fragment from the lock with basic tools you may already have at home. Tweezers work well for tiny fragments and pliers can be used to pry out the key. You can also use the key extractor, which is a tool specifically designed for this purpose that is typically found at auto parts stores. You can spray lubricant into the lock to aid in the extraction process.


Keep both pieces of the keys that are damaged. This helps the locksmith create a more precise duplicate, which can make the replacement process faster. It can also help you get back on the road faster. If you don't own any spare working keys or keys, you can ask the dealer to start your vehicle with new keys and use it to program the new one.

You can also purchase a second key and insert it into the ignition to set up the computer in the vehicle. After a few seconds, switch the key to the "on" position but don't actually start the engine. Then, change to your new key. This process can last between a few minutes up to several hours. You'll need a method to get around until the process is complete. This could mean using public transportation or relying on family members to provide the ride.