These Are Myths And Facts Behind Key Repair How to Do car remote key repair on your way to work in rush, and put your car keys into the ignition. Then you try turning it into a lock, and it snaps in the lock!

There are several ways you can try to solve the issue before calling a locksmith. Here are a few quick fixes:1. Super Glue.

1. Call for a locksmith

One of the most devastating things that could happen to a car owner is a broken key in locks. This is especially frustrating if the driver is trying to get somewhere, or to drop off the child. In such a situation, it is important to act quickly and attempt to free the stuck key.

It is best to call an experienced locksmith for this task as they will be able to use the correct tools to take out the broken key and not cause damage to the lock. A lot of people look around the vehicle to find something light and sturdy such as a paperclip or toothpick, however this usually won't work as it is too thick to enter the lock.

The best way to do this is to use a pair of tweezers. They are small and easily fit inside the lock. They should be able to grasp the damaged part of a key and pull it out. If you don't own tweezers, it could be worth searching for a set sold at auto parts stores. These are flat, narrow and have tiny hooks. They can be inserted through the keyhole to grasp the broken piece of the key.

A magnetic key hook can be used to stick to the metal inside the lock, and then remove it. This is not always the best option since it could get caught in a lock and cause more damage. In this situation it is best to contact an experienced locksmith.

Some people try to glue together the two pieces of a broken car key using superglue in order to get it out of the lock. However, this could be extremely risky since the pieces of metal could stick to one another and break apart again later on. It is essential not to turn the key, as this could cause further damage to your lock or ignition cylinder. It is best to contact an expert locksmith who will be on hand to take out the broken key and create a replacement on the spot.

2. Drill a hole

Sometimes, a key gets damaged inside the lock, and even with an extra key, you may not be able to gain access to your vehicle. In these situations, drilling out the lock is the best choice.

First, you need to ensure that the key hole is set to accept a standard tumbler car key. If it's not there, you won't have the ability to drill out the pins and cause damage to the lock's door or mechanism.

It is important to note that you'll drill through an outer plastic layer as well as an inner layer of metal. A small drill bit will suffice to penetrate these layers, but it is important to be sure to not go further than this. If you drill too deeply it could cause damage to the wiring harness or cause the drill bit to become stuck within the hole.

It is also recommended to wear a mask and protective gear while working with drills. This will prevent dust and dirt from entering your respiratory system.

Finally, it is a good idea to have two pairs of pliers and tweezers in your possession in the event that the broken key is sticking out of the lock. If there is enough of the key protruding to be able to grasp with tweezers or pliers, this should be sufficient to get it out of the lock. If not you'll need to use tools like this one to wedge the tool into the lock and then rotate it towards the key to grasp it and take it out of the hole.

3. Drill a nail

You could be left without a home when you cut your key in half. Luckily, there are a few solutions to fix it, without having to pay for locksmith. The first thing you can do is use screws or nails. These can be found in your home or in a hardware store. However, it is best to search for a nail that is as thin and as long as you can. You can then insert it into the hole, and then use epoxy glue to join the two pieces together. It is also good to ensure that the nail's back is level. This will allow it to fit into the cut slot of the key. This will prevent it from moving and possibly breaking again in the future.

4. Super Glue

Many auto owners opt for DIY hacks, such as using super glue, to fix a broken key. This is a dangerous practice. You could cause damage to the lock, and then have to shell out more to replace it.

First, you need to take a look at the keys that have been damaged and ensure that they are identical in terms of size. This step is crucial to ensure that the glued parts are properly aligned and the key will fit into the lock once they have been bonded. Then, use a piece of fine-grit sandpaper or a metal file to smooth out the edges of the broken pieces of the key. This will strengthen the bond of glue and decrease the likelihood of a future loose key.


Once you have polished the edges of the broken key then apply a small amount of super glue to one of the ends. Be cautious not to apply too much glue, as this can cause the key to become too heavy and may be difficult to fit into the lock. After aligning the two pieces of the key that broke and pressing them together, you can press them. After a short time, the glue will begin to set and join to the key pieces.

A paperclip or bobby-pin can also be used as a tool to remove a damaged key from the lock. They can be cut like a pick and inserted into the lock. This method is particularly useful if the break is near or within the keyway or lock hole.

Another thing to remember is that if the damaged car key is equipped with electronic components that require the cutting of a new key from the dealer or a professional locksmith. The key must be reprogrammed using a new code, and the chip inside the key must be changed. If only the shell or metal part of the key fails, you will need to replace the cut. It is not necessary to reprogramme or replace electronics.