The Top Companies Not To Be Follow In The Double Glazing Door Lock Repairs Industry Double Glazing Door Lock Repairs

Are you experiencing issues with your uPVC door or window mechanism not working properly? Perhaps the window or door handles don't meet up properly or are difficult to use.

It is crucial that your double glazed doors function smoothly, or else you'll be wasting energy and increase the chances of burglary. Owen the Locksmith can fix your door lock at an affordable cost.

Snapped Key

If a key breaks in a lock, it could be incredibly frustrating. It could also be a security risk since the door may not be locked and leave you vulnerable to burglars. There are a couple of quick fixes you can make to repair the issue and make your door functional again.

First, remember to stay calm. If you panic, you could end up pushing the damaged key piece further into the lock.

Spray WD-40, or another penetrating lubricant, into the lock. This will help the broken piece be removed more easily. You can also use the screwdriver to break up any pieces stuck. If you're lucky enough to have a bit of the key that is sticking out and you want to remove it, make use of a paperclip, or any other metal object that is thin to grab it and then pull it out. Both methods are effective, but you need to be careful not to push the broken key further into the keyway.

Some paperclips have grooved edges that can work in a pinch as a hook extractor and some Jigsaw blades can also be used for this function. If you do not have any of these handy, you can use needle-nose pliers to bend them and create a hook. You can also make use of a pair of tweezers to grasp and pull out the last piece of broken keys.

If you are unable to remove the broken piece of key Use a lock deicer. It is found in most hardware stores, and it works by freezing any water or ice that could be inside the lock.

If none of these solutions work, it might be time to consult a locksmith. Fitlocks experts can quickly fix issues such as broken handles and broken keys with uPVC locks and door mechanisms. They can also alter your double glazing door mechanisms to allow them to operate more easily. You can book an appointment online for a double-glazing repair or call us to discuss your requirements.

Broken Cylinder

A damaged cylinder poses an extremely risky security issue. A locksmith professional can fix the cylinder. To fix the cylinder locksmiths will need to tap it. This can be done with the hammer or other tool. The best method is to employ a wire or long match. Position the match or the wire's end close to the keyway. After double glazing repair , the locksmith will strike the lock and break it open. This is better than using the hammer, which could damage the lock.

Overheating is the primary reason behind cylinder heads cracking. This can happen when the block and cylinder head are made of various metals like cast-iron and aluminum. When different metals heat up and cool down at different rates, it may create hotspots in the local area that expand faster than the rest of the cylinder head, leading to cracks.

Another possible cause of cracks in cylinders is corrosion. If the cylinder head and the cylinder block aren't maintained properly, this could result in corrosion or rust and cause them to expand at more than they ought to. As time passes, this may cause cracks.

If your uPVC window or door lock is brittle and requires a lot of pressure to turn it could be due to a variety reasons. This can be caused by a faulty locking mechanism or misalignment and also a worn out handle.

This is a simple and affordable fix that the majority of homeowners with double glazing can perform. A professional locksmith can usually fix this problem within one hour of arriving at your home. Depending on the needs of your home they can change the locking mechanism, change the window handles, and also change the gearboxes. A skilled locksmith will always be able to advise you on the most cost-effective solutions for your home. They can even suggest upgrades to high-security 3 Star Euro cylinders, TS007, that will add an extra layer of protection against burglars. This is a small price to pay for the security that comes from knowing that your uPVC doors are safe.

Broken Handle

Window handle locks have complex mechanisms that become less effective with time and usage, so it's no surprise that they sometimes break. If yours breaks, it can be difficult to determine the source of the problem and make sure you fix it correctly.

Fixing your broken handle, whether it's an internal locking mechanism or latch can increase the security of your uPVC door and stop draughts. When you aren't doing it right, replacing or repairing your handle can be expensive and could harm the door's frame as well as lock and frame, so it's worth spending some time to do it right.

Screwdriver Open the window, loosen the screw holding the handle. This should be located on the inside of the back plate, and is normally covered by an attractive cover for the screw for aesthetic reasons. Be careful not to lose any of the internal components inside the handle, such as the plates or levers that are on either side of the spindle. Ideally, keep these in the same order so that you can re-install them when needed.

Then, turn the handle so it's at 90 degrees to the window frame. Finally, loosen the screw on the back of the handle that holds it to the internal spindle with another screwdriver. Once the screw is released, you'll be in a position to pull the handle off and pull out the broken spindle. Replace it with a brand new spindle, ensuring it's the same length (you can buy them on the internet or in hardware stores). Screw it in the correct position. Be careful not to tighten too much as this could damage the handle or the window frame.

Ensure the new handle is correctly fitted after which you can close and test the handle. It should function smoothly, and you will be able open your window after a few times.


Make sure to check that your uPVC window is closing properly when you're working with the handle. If they're not, you could experience damp and draughts in your home as in addition to compromising the efficiency of your home's energy usage. Core Sash Windows is a local window company that can alter the hinges of the frames of your windows to ensure they close correctly.

Broken Spindle

It is usually the case that the spindle inside the handle is broken, not the handle itself. This is particularly typical in uPVC tilt and turn windows. These kinds of windows require a handle which acts as a locking mechanism within the window frame. The handle is connected to a rod in the centre that is then activated by a series of cams that look like mushrooms, they locks are inserted into the window frame. If the dead latch mechanism fails to open when the handle is turned, it is likely that the spindle has broken and this could be a very frustrating issue.

There are solutions to this problem. A reputable locksmith will be able to quickly and effectively fix this problem. A good locksmith will be able to disassemble the handle of the window by using a tool to take out the wheel portion where the spindle is located. This can be done without damage to the handle or window frame.

Once the wheel is removed, the technician can inspect the spindle to determine what has caused it to break. This involves disassembling the spindle and inspecting each component part, noting any damage or excessive wear. This procedure is typically carried out by technicians working in a clean environment.

The next step is to clean the damaged spindle. This will help get rid of any debris or dirt that could be hindering it from functioning normally. Following this, the spindle could be repaired or replaced. If it's being replaced, the technician could use an identical dowel size to the original and drill mating holes into both pieces of the spindle. This ensures that the new spindle is precisely matched to the handle.

If the spindle is damaged and cannot be repaired it may require replacement completely. Home centers sell generic replacements, but if the style of your window is unusual then it is necessary to contact a wood worker or cabinet maker who can replicate the exact part for you. Once the spindle has been installed, it can be fixed to the handle. Place the screw holes on the handle with the existing screws in the frame. Once the handle is firmly in place, you can use your uPVC windows.