The No. #1 Question That Everyone In Window Repair Must Know How To Answer Why Window Repair Is Necessary


A pebble thrown by a lawnmowers or a heavy drink that is set on your glass-topped coffee table are just one of the many things that can cause cracks in window glass. A window that is damaged allows rain, wind insects, and other unwelcome elements to get into your home.

While it is not possible to make a damaged window completely invisible, there are ways to repair it and prevent it from spreading further.

Water Damage

If water is seeping through your windows, a replacement is usually required. The moisture can cause rot in the wooden frame of your window. It could also affect the efficiency of your window's energy consumption. A reputable window replacement service can replace your frames with no damage to them.

Wood rot can affect the outside and inside of your windows. If your windows are made of wood and have spots of rotting, a repair may be possible when the rot isn't advanced. However when the rot has spread to the mullions or muntins (the parts of your window frame that hold the glass panes) they might need to be replaced. This can cost more than a new set of windows.

Another common issue that requires replacement is a damaged seal between the double panes of your windows. This could be caused by condensation or debris that has formed between your double-paned windows, or a sign that the insulation of your window has gone out of date. Fortunately, a lot of modern windows have insulation in them. They won't have the same problems as older windows with multiple panes.

The ugly casings, like ones that are cracked, loose or rotten, as well as missing, can create other issues. A damaged casing alone doesn't necessarily mean that it's time to change your windows, though. You may be able to sand it and then repaint it to make it look better based on the condition of the wood and the surrounding.

If the casing on the outside isn't in good shape and you're looking to replace it, a fresh coat of weather-resistant exterior paint could be all you need to keep moisture from damaging your window. You can also install new exterior casing to give an attractive and functional upgrade to your home.

Paint that has peeled or chipped

Frames and window sills are typically close to the elements, and they take a lot of damage from precipitation and sunlight. Peeling paint around windows is mostly caused by moisture, particularly when exposed wood is involved. Water seeps through the wood and when it evaporates, the pressure below the paint film causes the paint to peel. Moisture can come from condensation on the interior or rain and snow on the outside. Whatever the cause it's essential to scrape and sand the wood and then repaint when the paint starts to chip. Some skilled artists add a water-repellent preservative or thinned boiled linseed oil the wood prior to painting to slow moisture penetration and make the new paint hold better.

If the paint begins to chip off the window, it's time for repairing your window. Before you apply a new coat, put a drop cloth or tarp over the area you're working to catch any loose drops of paint. Utilizing a utility knife carefully scrape away any paint. Be careful not to cut the wood below or cut the sheathing underneath. Allow the area to dry completely after cleaning it thoroughly.

After the area is dry, sand the area again with a fine sanding pad. This will make the surface ready for primer and create a surface that is ready to receive paint. If you're working with lead-based paints make sure you use the proper safety equipment. Clean the sanded surface and tape off any surfaces adjacent to it like baseboards to protect them from paint.

You can then prime and paint according to instructions on the tin you are using. Follow the curing and temperature instructions on the paint's can, as they will vary depending on the type. Paint the exterior using exterior-grade paint, and the interior surface with interior-grade paint.

Window replacement can be costly, but repairing chipped or peeling paint is relatively inexpensive and is an effective alternative to replacing the entire frame. If your window frames are damaged beyond repair however, it could be worth upgrading them to newer, more energy efficient windows.

Cracked glass

A broken window can leave your home vulnerable to wind and rain, as well as bugs. If the break or crack isn't severe enough, you can repair it yourself. It's best to address small cracks as soon as they happen, before they get worse due to time or temperature fluctuations.

While there are many methods to make broken glass invisible, this is a tall task for a DIY. Even a tiny chip could cause a crack in the glass, which can cause more breaks and an expensive replacement. Covering the crack with plastic is a great solution. It covers it from the outside and stops air or moisture from getting through, which could damage the frame or seals around windows.

Before you put on the plastic and putting on your gloves and safety glasses and then remove the broken piece of glass from its frame. Utilize a utility knife scraper, chisel or chisel to remove the old glazing points that secure the pane. Also, you should employ the knife to cut away any wood that is empty and then clean and seal that area with linseed oil or a clear wood sealer.

You can then apply epoxy to glue the glass back in place. This is the most time consuming however it will give your glass a more solid appearance. If you're using epoxy, opt for the double-cylinder version that disperses the resin and hardener in equal proportion. This lets you precisely control the amount applied to the glass which will ensure a solid seal.

If you have double- or triple-pane windows be sure that the gas fills are intact when resetting the glass. window repairs near me are vital to insulating and keeping the heat inside your home during the winter months, and outside in the summer. If you take the window off the gasses escape and cause it to lose its energy efficiency. Gas fills can be replaced using the same method as for repairing cracks on other types of glass.