15 Amazing Facts About Saab 9-3 Key Replacement You Didn't Know How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a unique set of steps to take to add another key. It requires dealer assistance using an electronic handheld computer called Tech-2. Then it is necessary to purchase a new transponder. key must be purchased.

Make sure to rotate your keys in order to prevent one from deteriorating faster than the other. This will also ensure that your keys remain in top shape.

Replacement Case

Contrary to the classic Saab keys of old, the new key fobs contain electronics which makes it difficult to copy. This has made stealing cars considerably more difficult than it was a few years ago. It has also made it more expensive to replace lost keys.


Saab 9-3 owners should have two keys working. If one is lost it is expensive to add another to the car because it involves replacing the CIM module and re-programming the locking cylinders. Dealers typically charge between $100 and $200 to do this.

There are options to avoid the high cost. Some parts suppliers will use the code of the spare key to cut a brand new metal blade at a fraction what the dealer charges. The key must be the exact same as the original for it to work in your vehicle.

Follow these steps to replace the case. You'll require a flathead screwdriver along with some patience. With the screwdriver slowly tear the plastic away and then separate the emergency key from the case. Once the case is open, remove the electronics and place them into your new case. Place the key with the correct badge into the case.

Replacement Battery

The replacement battery for the Saab 9-3 is an affordable component that can be replaced easily and quickly. The YouTube video of Cyclone Cyd demonstrates how to replace the remote fob battery in just four simple steps. This guide should work with any modern saab key fob though the process may vary slightly.

This button is usually placed next to the Saab logo on the back of the fob. It's usually close to the Saab logo on the back of the fob. Next use a flathead screwdriver into the small hole inside this button. This will allow you to open the case of the fob to allow you to replace the battery.

After you have installed the new battery CR1632, you are able to reassemble your remote key fob. Then, you can program it into your car. The entire process should not be more than an hour. saab keys 's a very easy process that does not require any special equipment.

If you lose a key, the process will be more complicated however it can be done. The dealer will first need to read the VIN of the vehicle, and then purchase a replacement TWICE module and key blade with the correct unique code. After that, they will need to cut the replacement key and then program it using an innovative software tool called MDI.

Replacement Key Fob

The key fob is the part that locks and unlocks your car, it has an internal battery. The batteries last for a certain time and will eventually die. This is a regular issue that occurs with all vehicles and the good news is that you can change the batteries on most key fobs without having to replace the whole case. You can buy replacement fobs from Amazon that include all the electronics already in place, so you'll just pop open the case and replace the batteries in the original case. It is important to note that you'll need remove the emergency key first, and you can do this by inserting the screwdriver of a small flathead into the slot in the middle of the case. The case will split as you work the screwdriver all around it.

If you're ready to replace your keys, make sure you have a spare in your possession. This can save you a lot of money. If you have a spare, you can ask the dealer to cut a new key and program it to your car, which is much cheaper than replacing the entire key fob.

If you don't have a spare car key, you can add another key to your car, however this will require a lot of research and effort. The cost for adding a second key is a few hundred dollars, and it also requires the programming of the car's computer. Professionals can accomplish this but it's not a cheap option.

Replacement Ignition

Unlike the earlier Saab cars, the modern SAAB 9-3 models feature an extremely sophisticated alarm system that is dependent on a coded keys. If you lose your primary key, it may be costly to get another one, as the car has to be equipped with a specific computer and also be programmed to accept a new key. Dealers can even charge hundreds of dollars to program an additional key if they are unable to do it.

If you've lost the only working key, a dealer will replace the computer in your car (known as the CIM or SAAB TWICE) in order to make the replacement, and will charge a premium for it. We can reprogram the existing EEPROM in your car computer so that it is ready for an extra key. This will save you more than 50% on the price you'd pay a dealer.

If you've been a long-time owner of an 03-11 SAAB 9-3, then you likely are aware that the ignition key isn't very durable. They can become incredibly sticky, and the buttons can fall off occasionally and you should think about purchasing a new one if yours isn't performing as it should. Fortunately, replacing the ignition key isn't as complicated as it seems, and it can be done fairly quickly with the proper tools.