The History Of Double Glazing Repair Why You Should Trust Your Double Glazing Repairs to Local Experts

Replacing double glazing is not something you can do yourself however a glass specialist can make it simple and safe. It is also worth contacting the company you bought the glass from if it's still covered by warranty.

Misted windows can be made to drill to release condensation, however this is only a temporary fix. Double glazing that is blown needs to be replaced in order to improve the thermal efficiency.

Broken window panes

When a window's pane is damaged, it leaves an opening in the double-glazing that can result in draughts and moisture. They're not just annoying, but can also damage your property and health. Damp environments can cause rotted frames, structural problems and other expensive repairs.

A damaged window is usually simple to fix if are aware of the correct procedure. Wear a pair of gloves and eye protection to protect yourself. Then, you can remove the glass shards that were left. Make use of a utility blade to cut through any metal glazing points and glazing putty after you have removed all shards. When the glass is completely free to be removed, gently remove it from the frame.

After you have cleaned the area and sanded it to get rid of any paint or gunk, it is time to prepare the new glass. Make sure you take measurements of the opening from side to side and from top to bottom and subtract 1/8 inch from both dimensions to accommodate any expansion or contraction of the frame over the years. This will ensure that the new glass is installed correctly.


Next, apply a cord of glaziers compound to the outside edge of your glass frame. Smooth it out using a putty blade, ensuring it matches the colour of the frame. When the compound is dry and dried, you can paint it and the new pane in the same color as the rest of your window.

Finally, to stop the crack from spreading, score a small arc using a utility knife just beyond the cracked area. This will curtail the crack and stop it from spreading, thereby saving your window without the necessity of replacing it.

While you might be tempted to DIY your own repairs however, it can be very difficult without the proper tools. It is safer and more convenient to contact a professional who is specialized in local double-glazing repairs. This will not only spare you a lot of trouble however, it will ensure that your double glazing is repaired expertly to the highest standards.

Broken seals

A broken seal can cause windows to lose their insulation properties, leading to drafts and higher energy bills. This lets moisture and humidity to get into the window panes causing condensation and fogging. Foggy windows can be a hassle and will only get worse if you don't do something about it.

You can stop the window seals from breaking by having your windows professionally installed, and avoiding using power washers to clean your windows. Even the windows are in good shape it is important to have the window seal replaced when you see any signs of a crack or a leak, like condensation between the glass panes or a noticeable increase in your energy bills.

The window seals are constructed of flexible materials that could be damaged as time passes. Older windows are more susceptible to this problem, as are windows that have been exposed to a lot of sunlight. Window seals may also fail if there are problems with the installation, such as gaps or frames that are uneven.

Although it is possible to repair the broken seal on your windows however, the process could be complex and damage other components such as argon within the window. It is recommended to contact an expert to examine your windows and repair any worn or damaged seals.

After the window seal has been replaced, your double glazing will perform exactly as it should, shielding your home from unwanted heat loss and cold air infiltration. This will save you money on your heating and cooling bills while keeping your home at a comfortable temperature.

In most cases, repairing an ineffective window seal is as simple as removing the window from its sash and removing the sealant that was previously used. Once the window is cleaned and is now ready to be put back in place, it will be filled with argon before being sealed once more. It is possible to complete the job yourself, however it is recommended that you call a professional to ensure it is done safely and correctly.

Broken door handles

The handle for the front of your home is a crucial element of your security. It allows you to open the door, and also connects to a latch that is fitted into a slot within the frame of the door to keep the door shut. If the handle is loose, this can cause difficulty opening the door. It may also be a sign that your locking mechanism isn't working properly.

The good news is that fixing a loose door handle is relatively easy. In most cases you can tighten the screw holding it in place. If the issue is deeper than that, you might require an entirely new handle.

First, you'll need to open the door using a stop or wedge so that it doesn't close when working on the knob or handle. This will stop the paint from being damaged and will allow you to get access to all parts of the doorknob handle without having to worry about the latch.

The next step is to take off the coverplate that is positioned over the door handle. This may look like a piece of plastic, either rectangular or round, which is designed to conceal screws to give it a more clean appearance. Some may have an elongated slot or detent which you can press down using a flathead in order to release. Then, you'll have to pry the handle's base off and reveal the screws that secure it.

Most screws that keep your doorknob or door handle in place are hidden behind the cover plate. Once you've removed it, you can see each one and tighten them as necessary. Don't over-tighten the screws, since it could cause damage to the knob or handle. After the screws have been tightened you can put them back on the base, and then put the knob or handle on the top. Make sure that the holes on the handle or knob line up with the screw holes or detent holes. Test the handle when you're done to make sure it's working properly.

Chips and scratches

Even the most well-maintained double glazing can be damaged. It's only one or two hits from scattered footballs or a sudden gust of wind to cause cracks, chips and dents. These can affect the performance of your windows and doors, which will then have to be replaced with new ones. It is crucial to recognize the signs of damage and notify your installer as soon as you can, ideally in writing. It will help if you can provide the details of the problem, as well as photos if needed.

Depending on the severity of the scratches or chips It is possible for them to be repaired without a lot of trouble. If double glazing repair is deep enough that you can feel it with your fingernail, it's best to call a glazier to get rid of it. They will be able to employ glass polish to eliminate the scratch. They will also be able to provide you with some maintenance tips to keep your doors and windows in good shape.

Be on the lookout for indications of gas leaks in the space between your windowpanes. If you find condensation forming between the panes, it could indicate that the gas used to insulate has evaporated and warm air is finding its way into your home. If you notice this issue it is crucial to communicate with your installer straight away, as this will likely be covered under the warranty.

If your double-glazed windows are covered by warranty then you'll be able to get reimbursement for any repair costs. Alternatively, you should consider switching to another installer you can count on to provide high-quality windows and excellent customer service. Review online reviews, look up the BBB or request references from past customers to ensure you select a reputable and quality company. It is also important to inquire about the certifications of major manufacturers and the Fenestration and Glazing Industry Alliance. This will allow you avoid companies that are not authorized to install double glazing.