Why We Love Nissan Qashqai Key Fob (And You Should, Too!)
Reasons Why Your Nissan Qashqai Key Fob Won't Work
The Qashqai's large dimensions give it a distinct SUV feel. Its ride on 19-inch alloy wheels in Ti and STL models may also be a bit firm. The front tyres on the Qashqai are also prone to losing traction on rough surfaces, and its CVT can occasionally display a wrist-flexing torque steering.
This is typically caused by a dead coin battery which is easily repaired in a matter of minutes. Make sure the battery you replace is of the same voltage, size and specification.
Water Damage
One of the most frequent reasons why a Nissan key fob gives the "key ID is not correct" message is due to water damage. The key fob comes with rubber seals which protect the chip inside, however prolonged exposure to moisture can cause it not to function properly. This is often the case in the event that you've dropped your key fob into the ocean or in a swimming in a pool, but it can happen when it's wet due to soapy hands or rain.
If your key fob is exposed to water for an extended period of time, it could need to be cleaned with isopropyl ethanol or electronic cleaner. In addition, it may require a visit to an expert for repair or replacement.
If your key fob require replacement the process is simple. First, ensure you have a multipack of the right battery (CR2032 3V). Remove the front and back cases using the flat-head screwdriver. You'll have to remove the metal retaining clips and remove the old battery, then put in the new one. After reassembling your fob, put the mechanical key back into place and verify that it operates correctly. If not then you'll need to take it to your local Nissan dealer or a professional locksmith to replace the chip on the key. The chip is typically not damaged by water, so it shouldn't be too expensive.
Dead Coin Battery
Another common reason your Nissan Qashqai key fob may not function is because the battery in the coin has gone dead. These batteries usually last 3-5 years, but they can become depleted in time, particularly when the fob is frequently dropped. You can replace the battery with a new one, but make sure that it's the same voltage and size as the original. If
nissan micra key replacement choose to use a different battery it may cause the key to have an untrue key ID, that could hinder it from paired with your vehicle.
The best method to replace the battery on a Nissan Qashqai key fob is by prying open the fob with a small flat head screwdriver. The screwdriver should be inserted into a small notch at the bottom of the fob and twist gently to separate the two halves of the key fob. Remove the old CR2025 battery and replace it with a brand new one, observing the position of the previous one inside the fob.
Check the terminals for water damage or dirt before installing the new battery. If there is, clean the terminals with a tiny amount of isopropyl alcohol. Make sure that the pole cables are connected correctly. They should be connected to the positive and negative poles of your battery.
Diagnostics of a fault
If your Nissan Qashqai key fob stops working after exposure to clean tap water or rain, it may be a sign of a chip problem inside the. A battery change won't solve this, and you'll have to purchase an entirely new key fob. If the key fob has stopped working after you dropped it, it's likely that the chip inside was damaged. If you clean the chip using isopropyl alcohol and paper towel, then replace it in the key fob, you can generally get it back to working.
Key ID Incorrect is a common error that can be seen on the dashboard of your vehicle. The vehicle is unable recognize the key fob, and therefore will not allow the car to start. The issue could be caused by a variety of things such as water damage, undetectable problems in the circuitry of the key fob, or RFID interference.
If the battery that powers 12 volts inside your key fob is dead or not providing sufficient electric current, it will stop working. This can affect the remote keyless system and central locking on your Nissan Qashqai, as well as stopping you from starting your engine using the key fob (if equipped with Intelligent Key). Check the batteries inside the key fob if it is in a position to lock or unlock your door manually. You may also try reinserting the battery to reset the transmitter.
Reprogramming
If the key fob has not been submerged in salt water, it should be able to come back to life after a simple wash with clean water. You could also try cleaning the electronic chip with isopropyl alcohol or an electronic cleaner. If none of these work then it might be time to replace the entire key fob by a new one.
If your Nissan Intelligent Key is still not working, there could be a problem with the connection between it and the car. Start by pressing the ignition key, but without beginning the car. Continue doing this until you see the hazards lights flash twice. Then, turn off your vehicle and remove the key.
Open the fob compartment of your vehicle's fob compartment. This is usually located in a door jamb on the handle on the driver's side, or under an armrest. Find the small "program" button and press it. You will hear a chime when the process is completed.
Now that your Intelligent Key is relinked to the car It's time to test it out. Take a step away from the vehicle and click all of the buttons on it. If the lights flash and the horn sound this means that the key is successfully linked to the Nissan. You can also test it near the Nissan.
