How Nissan Qashqai Key Replacement Has Changed My Life The Better How to Replace a Nissan Juke Spare Key

Nissan Juke is a fun and stylish hatchback, with an unusual engine configuration. It's not the most quiet, but still fun to drive.

The battery for the key fob in your nissan juke needs to be replaced every two years or more, or if the battery is low. You can do it yourself, but you'll need tools.

Dead Coin Battery

If your Nissan Juke key fob has stopped functioning the first thing to check is the coin battery inside. It may be dead and require to be replaced. This is a straightforward fix that will take only some minutes. Flip the fob upside down and you can access the tiny latch/release at the back. Replace the old battery and ensure it's facing down on the fob. Make sure to align the two halves of the fob carefully.

The fob needs to be cleaned if it was exposed water before you can install an entirely new battery. This can be done using paper towel and isopropyl alcohol or electronic cleaner, and let it dry completely prior to re-inserting the battery.

To start the car, the key fob must be paired with the car. This can be done by following the directions in the owner's manual, or using an OBDII scan. If the key fob hasn't been paired, this is the most likely explanation of the reason it stopped working. A malfunctioning chip inside the fob could cause it to stop working however this is extremely rare. In this scenario the need for a new receiver module might be required. If this is the situation, it's best to be replaced by an authorized technician.

Water Damage

Key fobs operate on batteries and the batteries need to be replaced every two years, or when the car ceases to respond when you hit the "start" switch. The rubber seals on keys keep out water, but submerging a key fob into the pool or ocean can damage the chip's electronic. If this is the case you'll have to purchase an alternate key from Nissan or a locksmith.

If the key fob has an active chip it's possible that the computer has lost its connection to it. This can be the result of a variety of reasons. It can be fixed by restarting the car. If the "Key ID error" message continues to appear then you must contact Nissan for assistance.


The three most common reasons for this are dead battery on the key fob or keys that are not programmed, and a damaged or defective key fob that has been damaged or broken. The first two are fairly simple to fix while the third is more difficult to diagnose and repair immediately but can be solved with patience. Compare Nissan Key Replacement costs near you using WhoCanFixMyCar and then book your repair online. Read reviews about local Nissan dealerships, Nissan mechanics, and garages in just a few moments.

Faulty Chip

The key fob of your Nissan Juke has a special chip that sends an electronic signal to the car whenever you turn it. The key may not function because the chip is malfunctioning. If this is the case the issue will only be resolved by replacing the key. There are many reasons your Nissan Juke's key could be damaged, including water damage or a dead battery for your coin or a malfunctioning receiver module.

If your key fob stops working after washing it or even a bath, you should check the chip for water damage. Make sure the metal retainers are in good shape and the chip isn't exposed to water. If you notice any indications of water damage, you can try removing the battery and cleaning the electronic component with isopropyl alcohol, or electronic cleaner.

If the chip is not working If the chip is damaged, you'll have to contact your local locksmith or dealer. In order to find a replacement, they will require the year, make and model of your vehicle. Also, you will need record your VIN (Vehicle ID Number) so that the dealer or locksmith will know which key you have. This will enable them to verify the correct key code and ensure they are cutting the correct key.

Faulty Receiver Module

The key fob sends the radio frequency signal to your car to perform many functions. The key fob can open your trunk while you rush to get groceries or even start your car by pressing the fob's button. It can also open your windows and turn the horn on in the event that you lock the keys inside your car.

If The KeyLab stops functioning, there could be problems with the receiver module in the vehicle. The receiver modules are tuned to ensure they can detect specific frequencies which correspond to the signals generated by Nissan key fobs. If your car is equipped with a faulty receiver module is damaged, it will cease to respond to any signal sent by the key fob.

It's a good idea to have a spare Nissan key fob in the event that the original key you have or breaks. A spare key can be programmed by a locksmith or a dealership to work with your Nissan and will save you the difficulty of locking your keys inside your car or losing them.

If your Nissan Juke key fob is exposed to clean tap water or rain the issue can be resolved by cleaning it with isopropyl alcohol or an electronic cleaner. If the chip is damaged and you need to buy a new key fob which can be coded to your car by a locksmith or dealer.