The 10 Scariest Things About Repairs To Upvc Windows Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and even be fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they generally fit into frames of the past easily. However when you have double-pane windows that are anchored by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this situation you'll need locate some plastic spacers that will help the new pane to fit correctly into the frame of the window.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall on the fabric and not onto the floor which could cause them to be trampled under.

It's a good idea to seal the gap after the glass is removed. This will keep drafts and water from getting into your property until a professional arrives to fix the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the distance between the door and the window is large, you might want to use security screens that includes windows. This will provide the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can be affected by a variety of issues that include sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act immediately if you notice your uPVC windows are sliding.

To repair a window that is sagging, you can try to reposition the hinges. You'll first need to open the windows to get at the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to keep them in place.

If you are unable to reposition the hinges, you might have to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows are watertight and safe from drafts.

UPVC handles can also become loose. Most often it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to shut the window and do an experiment fitting. The corner joints of the sash should align with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it's important to take action. Leaks of water from windows can cause structural damage to your home and hinder your ability to control the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by any DIYer who has the ability. Depending on the severity of the issue is, the old caulking may need to be removed. When it is time to uPVC repair, you should avoid over-caulking. This will only make your window more difficult to clean and lower its energy efficiency.

Verify that the drainage holes do not have debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious cases you might need to consider replacing the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.


It is also important to keep in mind that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. Again this can easily be corrected by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it opens with a breeze. Any competent DIYer can replace hinges in just a few minutes.

Most households in the UK will have either top hung or side hung uPVC windows that are hinged and, like all mechanical parts, they can wear down over time. It's easy to change the hinges on a window however it is simpler if you have someone to help you to hold the frame.

Make sure that the uPVC hinges are open and closed in the correct direction. This can be done by looking for the arrow on each hinge, this shows which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a certain way or by improper installation in the factory. window repairs near me can be fixed by sending us a photograph on our website. We will be pleased to offer you suggestions.

It is also important to grease the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. It is recommended to perform this every year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few different factors. The hinges may also become unbalanced due to wear, causing an opening where the sash and frame meet. This can be easily repaired by giving them thorough clean, however in the event that they are beyond repair it may be necessary to have them re-aligned or replaced. Second, the interlock can also become disaligned. This happens on the hinge's side, and may need to be cleaned. In some cases, it may be necessary to replace these.

The second most frequent reason for draughts is window seals. These are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and will lessen the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

Your windows made of upvc will continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is essential to remember that all windows eventually become worn out, and it may be more cost-effective to replace them than to repair them. If you are experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional as soon as possible.