There Are A Few Reasons That People Can Succeed In The Double Glazing Door Lock Repairs Industry Double Glazing Door Lock Repairs

Are your uPVC window or door mechanism not working properly? Perhaps the door or window handles don't meet up properly or are hard to use.

It is crucial that the double glazed doors work smoothly, otherwise you'll be wasting energy and increase the chances of burglary. Owen the Locksmith can fix your door lock at an affordable price.

Snapped Key

If a key breaks inside a lock, it could be incredibly annoying. It's also potentially a security risk, as the door may not lock and make you open to intrusion. There are a couple of quick fixes you can make to repair the issue and get your door working again.

Remember to remain calm. If you get scared and start poking around wildly you may end up pushing the damaged piece of the key even further into the lock, thereby making the situation much worse.

double glazing repairs near me -40 or another penetrating lubricant, into the lock. This will allow the broken piece to emerge more easily. You can also employ a screwdriver in order to break up any pieces stuck that might be blocking the way. If you happen to have a bit of the key that is hanging out it, you can make use of a paperclip or other metal object with a thin surface to grab it and remove it. Both methods work well, however, be careful not to push the broken piece of the key deeper into the keyway.

Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades are also well for this. If you don't happen to have any of these items, you can bend a hook with needle-nosed pliers. Finally, you can use a pair tweezers to grasp and pull out the last piece of broken keys.

If you can't get the broken piece of the key out, you can try using a lock de-icer. It's usually available at most hardware stores. It works by freezing any moisture or ice that might be in the lock.

If none of these solutions work, it might be time to call a locksmith. Fitlocks specialists are able to quickly solve problems with uPVC door locks and mechanisms that have snapped keys as well as broken handles. They can also alter the double glazing door mechanisms to ensure that they are easier to operate. You can book a double-glazing repair online or call us to discuss your requirements.

Broken Cylinder

A damaged cylinder could pose an extremely risky security issue. It's a good thing that it's a simple repair for professional locksmiths to complete. A locksmith will have to tap the cylinder to fix it. They can do this using a hammer or other tools, but the most effective way is to use a long match or piece of wire. Then, put the end of the match or wire close to the keyway. After that, the locksmith will strike the lock and break it open. This is much better than using a hammer that could cause damage to the lock.

The most frequent cause for cracks in the head of a cylinder is due to overheating. This can happen when the block and cylinder head are made from different metals such as cast-iron and aluminum. When different metals heat up and cool down at different rates, it could create hotspots locally that expand faster than the rest of the cylinder head, leading to cracks.

Another reason that could cause cracks in the cylinder is corrosion. If the cylinder head as well as the block of the cylinder are not properly maintained, this can result in corrosion or rust and cause them to expand at a more than they should. This can lead to cracks over time.

If your uPVC door or window lock is brittle or requires lots of pressure to turn, it can be caused by many things. This can be caused by a malfunctioning locking mechanism, or misalignment as well as a worn-out handle.


Fortunately, this is an easy and affordable fix for the majority of homeowners with double glazing. A professional locksmith will usually be able to resolve the issue within an hour of arriving at your home. They can fix the locking mechanisms, or replace the window handles and change the gearboxes based on your particular requirements. A locksmith with experience will always be able to advise you on the most cost-effective solutions for your home. They can even suggest upgrades to 3 Star security Euro cylinders, TS007, that will give you an additional layer of security against burglars. This is a small cost to pay for the security that comes from knowing your uPVC doors are safe.

Broken Handle

It's not a surprise that window handle locks could break. They have complex mechanisms which deteriorate over time. It isn't always easy to pinpoint the reason for the problem and then fix it properly.

Whether the problem is in the internal locking mechanism or the latch, repairing your broken handle will improve your uPVC double glazing door's security and allow you to stop the draughts. It can be expensive to repair or replace your handle incorrectly and it can also harm the frame and the lock of your door.

Screwdriver When the window is open, loosen the screw holding the handle. The screw should be on the inside of the backplate, which is usually hidden by the cap of the screw to enhance the appearance. You should not lose any internal parts of the handle, such as the levers and plates on either side. Keep them in the same order so that it is easier to replace if necessary.

Then, using another screwdriver, loosen the screw that holds the handle to the spindle at the back. Once the screw is loose, you can take the handle off and take the broken spindle out. Replace it with a new spindle, ensuring it's the same length (you can buy them on the internet or in hardware stores). Screw it in the correct position. Do not overtighten the screw as this could damage the handle and the window frame.

Close the handle and try it. It should operate smoothly and you'll be able to open your window once again.

While you're working on the handle, make sure to ensure that your uPVC windows are shut properly. If they don't, you could experience damp and draughts in your home, as and also affecting your home's energy efficiency. A local window company, such as Core Sash Windows, will be in a position to adjust the hinges on your window frames so they shut correctly.

Broken Spindle

It is more typical for the spindle to break than the handle. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle that acts as a locking mechanism within the window frame. The handle is attached to a central rod which in turn activates cams that look like mushrooms, they secure the frame of the window. If the dead latch mechanism fails to open when the handle is turned it is possible that the spindle is broken This can be a very frustrating issue.

Fortunately, there are ways to rectify this issue. A skilled locksmith can quickly and efficiently solve the issue. A professional locksmith will be able to disassemble the window's handle using a tool to remove the wheel from the area where the spindle is located. This can be done without damaging the handle or causing other damage to the frame of the window.

After removing the wheel the technician will inspect the spindle to determine the reason for its break. This involves disassembling the spindle and inspecting each component part, noting any damage or excessive wear. This procedure is typically performed by technicians in a clean environment.

The next step is to clean the damaged spindle, this helps eliminate any dirt or other debris that might be hindering its normal functioning. The spindle could then be repaired or replaced. If the technician is replacing the spindle it is possible to use a dowel that is similar in size to the original. Then, he will make holes in the same way into both pieces. This ensures that the new spindle is an exact fit with the handle.

If the damaged spindle cannot be repaired, it could need to be replaced entirely. Home centers can sell generic replacements, but if your window style is rare you'll need to contact an expert in cabinet making or woodworking who can recreate the exact part. Once the new spindle has been installed it can be positioned to the handle by line up the holes for screws in the handle with the frame's existing screws. Once the new handle is installed, you are now ready to operate your uPVC window.