10 Meetups About Replacement Door Handles You Should Attend How to Replace upvc door handle handles in your home are an important element of your design. A new handle can bring your home's decor and interior up-to-date.

Over time your doors' knobs can start to feel stiff and even break. These are signs it's time to change them. This guide will help you choose the appropriate replacement door handle for your home.

Door Knobs

Door handles add to the aesthetics of your home while also making it easier for people to open and shut doors. They are available in a variety of colors, finishes, and styles to match your decor. If yours is beginning show signs of wear or you just want to upgrade, replacing them is relatively simple and can be done in a few steps.

The first thing you need to find is the spindle or shaft through which the knob is attached to the door. Some have a small hole that you can put an incredibly small screwdriver to release the set screws holding the knob in place. Some have a slot or hole that can be used with the flathead screwdriver on a spring-activated nut, known as a detent. When you press the pin it opens the latch mechanism and allows you to pull or push on the knob.

After you have ahold of the shaft or spindle take off the door knob and replace it with the new one. Make sure you align it correctly and verify that the latch functions correctly before tightening the new set screws.

Once you've replaced the knob, place the latch rod in position over the hole in the door and interlock it with the rod mechanism on the second knob. Make sure the holes are aligned and then thread in the screws on the latch plate and tighten them.


Some people choose a smooth or brushed metal finish for their door hardware, giving their home a modern and sleek appearance. This can be matched with the furniture they have. Some people prefer a rustic design that goes well with farmhouse-styled rooms. If you have members of your household who are unable to move You may think about a rim lock or lever style door knob that require less pressure to operate.

While aesthetics have traditionally been the main consideration when it comes to door handle design, other aspects are becoming more important too. Accessibility and control of infections are the main issues that have led to the development of innovative new handle designs including ones which can be operated by the forearm of a person.

Latch

The latch that opens your door can wear out from age and use. Changing out the old latch to make room for the new handle is a simple DIY job and it will make a huge change in the way your door opens and closes.

Depending on the type of handle you use, the latch could be a separate component or an integral part of the knob. In either case, you'll need to follow the same steps to remove and replace. It's easy to remove the old latch, particularly if you have an entry handle that has a "magic" button. This tiny pressure-slot, found on the side knob, is what you will need to press in order to pop the latch out of the handle.

If your handle isn't equipped with this magical button the first step is to take off any cover plates that are positioned over the latch plate. They are typically rectangular or circular and can be removed using a screwdriver to pry them off the handle. Some have a small hole in them that you can insert your screwdriver through, while others simply snap off.

The next step is to unscrew the two machine screws holding the latch and the plate to the door handle. These are the screws that are shorter with a sharp point You will be required to keep them in a secure location to use them again in the next steps. After these screws are removed you can remove the latch plate and mechanism out of the door's hole and set it aside.

Then you can begin to install the new latch. Place the inside of the latch into the hole in the door and secure it using the hardware provided. Make sure the square pin on the inside of the latch is facing the latching mechanism inside the handle and that it is lined up with the other screw chambers inside the door handle. Then, secure the exterior latch plate with the provided screws.

Strike Plate

One of the most frequent reasons for replacing the door handle is because it feels loose or doesn't lock properly. This is typically caused by incorrectly aligned parts of the latching system, for example a striking plate that's either too small or has moved upwards or down on the doorjamb as time passes. This project allows you to replace your old strikeplate with an extended one, which will provide better security for your door and ensure it stays shut.

Apply a lipstick or another marking material on the bolt that you are using to determine if it's the strike plate. Close the door and try to latch it. If the mark is located below the strike plate hole this indicates that your door isn't latching because the plate isn't long enough. If the mark is over the strike plate hole, it's likely that the strike plate has been moved up or down the doorjamb.

You may be able simply to screw the new strikeplate into place over the existing one using the screws included with it, based on the door you have. But, you may have to pre-drill holes and then chisel some of the wood to make sure it's a snug fit. If this is the case make sure you don't chisel out too much wood or you may ruin the integrity of the doorjamb.

You can also try installing a new box strike plate, which provides the lock with a stronger hold on the door and requires more force to open it. Typically, it requires two longer screws that secure the strike plate to the door frame. It is necessary to remove the old strike plate, then drill and chisel the wood to create space for the new one.

This hard-to-find strike plate is made to work with antique rim locks, and it's made from robust solid brass with the heavy duty thickness. It comes with wood screws and machine screws, which means you'll have the right hardware for your job. Be aware that wood screws have a pointed tip while machine screws are more blunt.