10 Inspiring Images About Double Glazing Repair Why You Should Trust Your Double Glazing Repairs to Local Experts

Replacing double glazing is not a DIY job however a glass specialist can make it simple and secure. It is also advisable to contact the company that sold it to see if there is still a warranty.


Drilling holes in misted windows will allow the condensation to escape, but it is only a short-term fix. Double glazing that has blown has to be replaced to restore thermal efficiency.

Broken window panes

If a window pane is broken, it creates an obvious gap in the double glazing that can cause draughts and moisture. These aren't only inconvenient but also can damage your home and your health. Damp environments can cause damaged frames, structural issues and other expensive repairs.

However, a broken pane is usually a simple fix when you know how to fix it properly. First, take the necessary precautions to avoid injury, like wearing eye protection and gloves. Remove the old glass shards. Utilize a utility knife to cut through any metal glazing points and glazing putty once you have removed all the shards. Once the glass has been removed from the frame, remove it carefully.

Once you have cleaned the area and sanded it to remove any gunk or paint, it is time to prepare the new glass. Take measurements of the opening from top to bottom, and from side to side. Subtract 1/8 inch to allow for any expansion and contraction of the frame. This will ensure that the glass you are replacing is installed correctly.

Next, apply a cord of glaziers compound to the outer edge of your glass-frame joint. Smooth it out with a putty blade, ensuring it matches the color of the frame. When the compound is dry and dried, you can paint it and the new pane with the same colour as the rest of your window.

To stop the crack from spreading, score small arcs with your utility knife just beyond the cracked area. This will reduce the crack and stop it from spreading, saving your window from the necessity of replacing it.

Although you may be tempted to make your own repairs however, it can be very difficult without the proper tools. It is safer and more convenient to contact a professional who specialises in repairs to local double-glazing. This will not only spare you a lot of hassle and hassle, but it will also ensure that your double glazing is repaired expertly to the highest standards.

Broken seals

A broken seal can cause windows to lose their insulation properties, resulting in drafts and increased energy bills. It also allows moisture and humidity to get into the space between your windows, which can cause condensation and fogging. Foggy windows can be difficult to endure and the issue will only get worse over time if it is not taken care of.

It is possible to prevent the window seals from breaking by having your windows professionally installed and avoid using power washers to clean your windows. Even if your windows look great, you should get the seals replaced immediately should you spot any indications that the seal is broken for example, condensation on the glass or an increase in your energy bills.

Window seals are constructed of flexible materials that can become damaged as time passes. Older windows are more prone to suffer this issue, as well as windows that have been exposed to excessive sunlight. Window seals can fail due to issues with installation, such as gaps and sloping frames.

While it is possible to repair damaged window seals by yourself, the process is complex and can damage other components of the windows, for instance the argon gas contained within them. It is suggested to speak with an experienced glazier to examine your windows and repair any worn or damaged seals.

After the window seal has been changed, your double glazing system will perform exactly as it is supposed to. It will safeguard your home from unintentional heat loss and cold air infiltration. This will help you save money on heating and cooling while keeping your home warm.

In the majority of cases, to repair a broken seal on a window, it is required to remove the window from the sash. The old sealant needs to be removed. Once the window is cleaned and is now ready to be put back in place, it will be filled with argon and sealed once more. It is possible to complete the job yourself, however it is recommended to call an expert to ensure that the job is done safely and correctly.

Broken door handles

The handle for the front of your home is a vital part of your security. It opens the door, and hooks onto a latch that is inserted into the slot of the door frame to secure it. If the handle of the door feels loose, it can cause problems opening the door, and it could be a sign of issues with your locking mechanism too.

Fortunately, fixing a broken door handle is relatively simple. In most instances, you just need to tighten the screw that holds it in place. If the issue is deeper than that, you may need to install an entirely new handle.

To begin, you'll must make sure that you open your door using a door wedge or stop to ensure that it doesn't close when you work on the handle or knob. double glazing repair near me will prevent it from damaging the paint and will also allow you access to all parts of the knob or handle without worrying about the latch being locked.

Next, you'll want remove the cover plate on the door handle. It may appear like a circular or rectangular piece of plastic designed to conceal screws for a more attractive appearance. Some may have an elongated slot or detent that you can press down using a flathead to release. Then, you will have to take off the base of the handle and expose the screws that hold it in the position.

Most screws that secure your doorknob or door handle in place are hidden behind the cover plate. Once you've removed it you'll be able to see each one and tighten them if needed. You don't want to over-tighten the screws, as it could cause damage to the knob or handle. Once all of the screws are tight, you can put the base back on, and then place the knob or handle on top to line up with the screw holes (if you have visible ones) or the detent hole. After you've finished, test out the handle to make sure it's working as intended.

Chips and scratches

Sometimes, even the best-maintained double glazing may be damaged. Cracks, chips, and dents can be caused by stray balls or a sudden wind gust. These can alter the performance of your windows and doors which then need to be replaced with new ones. It is essential to identify the signs of damage and contact your installer as soon as possible, preferring to do so in writing. It is helpful if you can provide the details of the problem and also photos where relevant.

Depending on the extent of the chips or scratches depending on the severity of the chip or scratch, it might be possible to have them repaired without too much trouble. If the scratch is large enough that you can feel it with your fingernail, it may be best to contact a glazier to get rid of it. They will be able to employ glass polish to eliminate it. They'll also be able to provide some tips for maintaining your doors and windows, that will help you keep them in top condition.

Also, you should look out for signs that the gas space between your window panes is causing an air leak. If you see condensation between the window panes, this could indicate that the inert gasses have been vaporized and warm air is now circulating through your home. If you spot this issue it is crucial that you get in touch with your installer straight away because this could be covered under the warranty.

If your double-glazed windows are covered by guarantee, you should be able to claim back any repair expenses. If not, you might want to consider switching to a different installer that can be relied upon to deliver top-quality windows and exceptional customer service. Check online reviews, check the BBB or request references from previous customers to ensure that you select a reputable and reputable firm. You should also ask about certifications from major manufacturers as well as the Fenestration and Glazing Industry Alliance. This will allow you avoid companies that are not authorized to install double glazing.