Five People You Need To Know In The Repairs To Upvc Windows Industry Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. They don't rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. It is important to make sure that your windows are in good condition.

For single pane windows it is fairly easy to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. However If windows with double panes are anchored by internal beading it will be more difficult to remove the old panes and put in new ones. In this instance it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you're planning to attempt to remove the window panes by yourself it is crucial to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also an excellent idea to lay down a drop cloth before you start working on the glass to ensure that any shards will fall onto the fabric rather than on the floor where they could be trodden under and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and fix the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the gap is large, you may be interested in the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

window repair and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. In time, they could develop a number of problems such as sliding. A sagging uPVC windows could cause issues with light, draughts, and even security. It's crucial to act when you notice your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. To do this, you'll have to open the window so that you can get to the frame. With a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and check for fit. If you're happy with the fit, tighten the screws until they remain in the right place.

If you aren't able to move the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows are waterproof and draught-proof.

uPVC handles could also loosen. Often this is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close the window and do a test fitting. The joints at the corners of the sash must align with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

It is crucial to take action if you wake up every morning to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame has been damaged or missing.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on how severe the problem is, the old caulking may need to be removed. When it comes to uPVC repair, you should be careful not to over-caulk. This can make your window more difficult to clean and reduce its energy efficiency.

Check that any drainage holes do not have debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.

It is also important to keep in mind that if the leakage originates from the glass in your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. This can be easily repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges


If your uPVC windows are difficult to open, or slack and blow open with ease, it may be the hinges that are at fault. They can be replaced by any competent DIYer and can usually be completed in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. The process of replacing a hinge on a window is essentially a simple process, but it's simpler with someone else to assist in holding the frame in place.

Verify that the uPVC hinges are closed and open in the right direction. You can check this by looking for the arrow on each hinge. This indicates which way the window should open.

The problem can be caused either by opening the window incorrectly or due to a poor installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be pleased to offer you advice.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant to the hinges is a good way to do this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. Ideally, you should perform this every year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also become disaligned as a result of wear, which can cause gaps between the frame and sash. If they are damaged beyond repair, it may be necessary to have them realigned. The interlock, which is on the hinge side of the window, may also be misaligned, and again it is possible to just give them a thorough clean, however in some cases it might be necessary to get them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

The final method to cut down on draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be placed over your window sill. They will help keep cold air out and keep your home warm and cozy!

With a little regular maintenance and repair, your upvc windows will continue to provide an excellent level of insulation and security for your home. It is important to remember that all windows eventually become worn out, and it could be more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your window made of upvc, it's best to consult an expert as soon as you can.