Will Fiat Panda Key Fob Replacement Ever Be The King Of The World? Reasons Your Fiat 500 Key Fob Won't Work

A key fob with the fiat 500 number is a handy way to unlock the doors and get started the car. However, there are numerous reasons why the fob won't be functioning. These include a dead coin battery or damage to the receiver module, water issues, and interfering.

This listing is for an NEW replacement Fiat Flip Key Remote - an exact replica of the Ilco brand that needs to be professionally programmed by a local automotive locksmith (click here for Locksmith Search). It comes with lock, unlock and trunk buttons.

Dead Coin Battery

The most common reason your 500 key fob won't function is the battery is dead. Modern key fobs offer an operating range that is limited and must be within only a few inches from the vehicle to function. If you are not within your vehicle and hit the keyfob, it will not respond and display the message "Key Fob Not Detected".

If this occurs If this happens, replace the battery in the coin-cell (Part Number CR2032) by a fresh one from a reputable brand like Panasonic Duracell or Energizer. They are usually available at your local hardware store or on the internet.

After you've replaced the coin cell battery It is possible to test it by standing near your Fiat 500 and pressing the buttons. The parking lights should flash and the key fob should operate the lock and unlock switches.

If the key fob doesn't function after replacing the battery, it might be damaged by water that blocks it from connecting to the receiver module in your vehicle. Water damage can occur through a variety of methods, including an easy splash or submerging the key fob saltwater at the beach. If you believe your fob was exposed to water, place it in a rice bag to draw out the moisture. If that doesn't work your fob will probably need to be reset by a professional auto locksmith or the dealer.

Water Damage

Although the fob is equipped with rubber seals to keep water from the electronic chip inside the device, submerging it into the ocean or washing it in a machine could cause water damage. Saltwater can cause the circuit board to become shorted and eventually fail. It's not a good thing to soak the fob in water however, don't give it up in the event that you accidentally drop it in the water or don't remove it from your pants pocket.

First, remove the battery from the fob. Before replacing fiat doblo key clean the electronic chip with isopropyl or similar products. Next try the fob and check if it functions. If the key doesn't work, it might need to be reset. This is usually done by an auto locksmith or dealer.

If your key is older and not programmed for your car You will need to replace it completely. A professional locksmith in the automotive industry can carry out this simple task. The locksmith will require the key to be cut to match your car's ignition. The locksmith will also need to program your fob into the vehicle's system. This is a low-cost and quick procedure that can be completed in the same day.

Receiver Module Issues

One of the most common reasons your 500 key fob won't be working is because it's out of range. The remote's range is of 30 feet, so in the event that you are far from your car it won't be able to respond to your commands. This can be easily fixed by moving closer to your vehicle until it starts responding.

If you've replaced the battery on your coin (commonly called"button" or "button" or "watch") and your fob doesn't function it could be due to an internal circuit board issue. Reprogramming the fob usually resolves this problem. You can find instructions on how to do this for all automobiles by searching YouTube or looking through the owner's manual.

It is possible to replace the metal clips that keep the coin battery in place. If they lose tension it can prevent your coin battery from being properly seated, causing your remote to malfunction.


In rare cases the fob could be desync'd with your vehicle because of software or hardware issues. This can cause a major headache, but you can frequently fix this issue by visiting a local dealer or auto locksmith to have them reprogram your fob. In some instances the software might require reinstallation in your body control modules.

Interference

In addition to a dead coin battery The key fob may not be able to receive or transmit a signal due to interference. This is possible when the key fob is in proximity to radio transmitters (cell phones or radar detectors) or another source of electromagnetic radiation. The key fob could not function due to a poor connection to the buttons, water damage or damage to the internal chips.

If the key fob stopped working one day without notice, or after trying everything you can do at home to resolve it e.g. You might have a damaged 500 receiver module If you've tried replacing it with a battery, reprogramming, or using an alternative key fob. The receiver module, which is located beneath the dashboard, detects radio frequency signals from your key fob. It converts them into electronic commands that the vehicle interprets.

Fortunately, there's an easy method of resetting all of the onboard systems in your 500 device, including the key fob. Disconnect the battery 12 volt for about 15 minutes by removing the negative cable first then the positive cable. Reconnect the battery. This will eliminate any remaining electrical charge, and then restart the computer of your car. This will help you get your key fob working again. If the issue continues, you should consult an expert technician. They'll be able diagnose the exact cause of your problems.