10 Great Books On Door Repair Door Repair Basics

Door repair can either be a simple, inexpensive project or more complicated depending on the extent of damage to the door. The most common places for damage to a door are hinges and locks.

Do some research prior to choosing a company for your door repair. Find references, services provided as well as licenses and insurance.

Repairing Cracks

If you notice hairline cracks appearing in your door frame, it can be alarming. It could be an indication of structural problems or that your door is in danger of being lost to the elements. There are some simple solutions to stop cracks from forming and getting worse.

It is important to first thoroughly clean the crack. This will help to ensure that there is no dirt or dust inside the crack which could interfere with repairs later. Next, you should allow the crack to dry completely. This usually takes about half an hour.


There are several options to fix cracks within the door frame. Wood putty or filler are the best choices for small cracks. This is because these products are relatively inexpensive and easy to work with. The best method to repair a crack on the door is to make use of real wood. This is because the result will be a stronger, more durable repair that is less likely to fail in time.

After you have selected the appropriate material for the job, apply it to all crack in the door frame. Make use of a putty knife to apply the compound to each of the ridges inside the crack. Use just a tiny amount at one time, making sure to cover the entire surface area of each of the ridges. Once the filler has dried then sand the surface until it is smooth.

You can paint over the repaired cracks to conceal them if you prefer. However, this is not always necessary, especially when the cracks aren't too large. When you repair door cracks, the most important thing to bear in mind is that you want the final result to be invisible. The aim is to create a an unmistakable finish that will not be visible even up close.

You should be able to locate a high-quality product at your local hardware store to fix the cracks in your door's frame. If the cracks are large, you may need to make use of wood glue or splines to repair the damage.

Patching Hollow Core Doors

Hollow-core doors are cheaper than solid wood doors and are commonly found in homes. However, they can be quite fragile and prone to damage. If it's caused by a powerful knock or an accidental punch the hole in an entrance is a serious issue that needs to be addressed as soon as possible. It's not just ugly and unattractive, but it can be detrimental on the efficiency of your home. It's simple to patch a hole in a hollow-core door using standard tools and materials.

To begin you must gather the following materials:

A utility knife

A utility knife is required to clean off the edges of the hole and make it easier for the patching material to adhere. Cut a small bevel with the knife around the hole's edge. This gives the patching materials more area to adhere and stop them from peeling later on.

Refinishing a door

The aging process can cause even the best-constructed wooden doors to show signs wear. The sun's UV rays, as well as fluctuating temperatures and humidity can cause damage to a door finish. Refinishing a wood door is advisable in the event that the finish begins to crack or peel. But, before you finish your door, you'll need to carefully remove any hardware and store it in a place that is secure.

After removing the old finish, you'll need sand the wood in order to prepare it for staining. For flat surfaces you can choose to use a palm or orbital sander. However, you will need to take care to scrape off moldings and other details. It is recommended to sand with the grain and to apply a gentle steady pressure to avoid causing damage to the wood. After you sand, wipe off any dust using a microfiber cloth or tack cloth to ensure that the surface is clean enough for the new stain.

It is crucial to select the right color when refinishing the door. Some people use gel stain as a quick fix to hide imperfections, but this type stain will not stick well to exterior wood and tends to flake within a year.

After you have selected your stain, it is important to let the door dry overnight. It is also recommended to sand between coats of varnish to smooth the surface and to ensure that it is free of any oil and residue. Additionally, you should use a natural-bristle brush to apply the spar urethane varnish and to create a smooth, even coat.

Once upvc window repairs and the varnish is dry, you can put back in any hardware that was removed. When the door is installed then you can polish it with wax-based polish or polyurethane to protect the wood from water damage caused by harsh weather conditions. Your door will look beautiful for a long time If you regularly polish it.

Replacing Hinges

The hinges on a door are an important part, but they can cause sagging and other problems. If your door is sagging or is difficult to open it is possible to replace the hinges to aid. Fortunately, you can complete this job without removing the frame of the door by unscrewing the old hinges and using new ones.

To get started, remove the existing screws from the hinges of the door jamb and hinge leaf. Use a hammer to create a mortise in the wooden structure where the hinges are to be placed. The depth of the mortise should be the same as the thickness of the leaf of the hinge. After constructing the mortise test the hinges to see if they fit snugly and securely. If the hinges don't fit make a new chisel hole until it's the proper size.

Once you've prepared the hole for the new hinges mark the locations of their screw holes on the jamb and the door using a pencil. You can use an aide to screw installation to ensure that the screws stay straight when they are being installed. Next, drill narrow pilot holes through these markings. Finally, insert the hinges that you have made and secure them with the help of a screwdriver or drill.

It's not necessary that the screw holes on the new hinges align perfectly with those in the jambs of the door but they should be close enough to be able to match. The hinge plate will cover any holes that aren't exactly the same.

When you're finished you're done, put the door back into position and join it to the hinges by sliding it into the hinge pins. Use blocks of wood as support while working on the door in case it's shaky. Then, remove the blocks and test the door to be sure it shuts and opens correctly. If it does, you're done!