The Three Greatest Moments In Upvc Door Handle Replacement History Choosing the Right UPVC Door Handle Replacement

Replacing your door handles made of upvc is an easy task but picking the right handle can be a challenge. Modern double glazed handles are equipped with spring cassettes, whereas older handles don't.

If your upvc handle seems loose and floppy, there could be an issue with the internal parts of the multipoint lock. This article will discuss a number of potential problems & their causes.

Handles that slide or loosen

uPVC handles can sustain wear and tear, particularly in older properties. The most frequent reason the handle becomes floppy due to a broken spring cassette within the door lever. This is usually due to excessive force, and the square spindle which holds the cassette may be displaced or rounded off.

The good news is that replacing the door handle made of uPVC is an easy task and can be done in just a few minutes. The first step is to disassemble the old handle unit by unscrewing the fixing screws that are visible on the back of the lever plate. Once the handles are removed, you can remove the screws and replace the cassette.

You can find a vast selection of uPVC door handles to pick from on the internet and a lot of them are available in various finishes. The finish you choose will determine how long your handle will last and how it is easy to keep clean. Finishes like PVD, Stainless Steel or Resista are designed to resist corrosion and will last up to 25 years.

After you have chosen the colour or style you can then choose the type of handle you require. The most popular types are pad and lever arrangements. Lever pads feature a lever inside and an outside paddle and are often used as a security feature to prevent unauthorised access.

Then, take a measurement and note the dimensions of the handle you currently have. You'll need to determine the PZ dimension, which is the distance between the screw hole and the middle of your lever. You'll also need to know how long the handle is as well as the size of its keyhole. Once door handles repairmywindowsanddoors know the measurements, you can compare them to the handle sizes matrix to find the correct replacement.

Broken springs

Over time, the handles of uPVC doors may become wobbly or loose and sometimes the spring cassette inside may break. These tiny springs help bring the handle lever into a horizontal position and without them your doors won't lock properly.

Modern uPVC handles are designed with these cassettes built directly into the backplate. These springs are often integrated into older uPVC door mechanisms. This can't be fixed on your own, but it's worth asking your locksmith to look as this could be the reason for the sagging or drooping uPVC door handles.

One of the most common issues associated with uPVC door handles is that they become loose or wobbly with time, and this is typically due to worn-out springs which can be easily fixed. Most often it is due to excessive use of the handle and as a result of that the square spindle inside the handle will wear out and cause the springs to shift out of position.

In order to rectify this issue, open the door and loosen the fixing screws at the back of the handle plate. This can be done with a Philips screwdriver. After the screws have been removed, the handle can then be removed. The handle plates can then be removed. Then, you can remove the old springs and replace them with new springs.

Depending on the type of handle you are using the distance between the two fixing screws may differ and it is essential to know before buying the replacement. This measurement is referred to as the PZ measure and it is recommended that this measurement is measured using a calibrated tape measure for accuracy.


After replacing the springs you should be able to use the handle without issue. It is important to oil the internal mechanism to ensure that everything is working exactly as it should. This will not only ensure that your uPVC doors are as secure as they can be but will also make them more comfortable to operate for a long time.

Handles that slide around

Handles that slide are caused by many things. One of the most frequent causes is when the levers of the handle aren't aligned with the lock. This can happen with both uPVC and composite doors, but is usually more noticeable on older doors because they are often made from cheap materials that aren't able to hold up to the elements.

This issue can be fixed by a professional who will adjust the handles and ensure they're in line with the door lock. They'll also inspect the lock to see if there is anything that requires fixing. In many cases, a simple adjustment to the handle springs is all it takes to solve this problem.

Changing your uPVC door handle is simple enough, but it's crucial to measure the measurements of the existing handles to ensure that you have the proper size replacement. You'll need to measure the distance between the two fixing screws, and the dimensions of the lever as well as the key-hole position. You can then make use of this uPVC handles size guide to locate an appropriate replacement for your home.

Once you have the measurements The next step is to remove the old uPVC handles. This is usually fairly straightforward and requires just a screwdriver reach the screws on the inside of the door. Once the screws have been removed, you are able to remove the handle and then move onto installing the new handle.

Before starting the work, you should ensure that the door is securely open using a wedge to stop it from closing in the middle of your work. Once the handle is removed, you can now get to the inside of the door to fix the issues that are causing it to slide.

A handyman from Fantastic Services will be able to help if you don't want to do the job yourself or don't have the skills. They will employ specialist locksmith techniques to unlock the door without causing damage and then replace the handle that is damaged, making sure everything is working exactly as it should.

Gearbox damage

A damaged gearbox could cause the door handle made of upvc to become stiff or lose its functionality. The lock may also not be able to be opened by keys. This can be dangerous and should be addressed as soon as is feasible. If you are unable solve the problem yourself it is crucial to contact a locksmith as they have the expertise and tools needed to complete the task properly.

The first step is to take the handle from its cover plate. You can do this using a screwdriver that has a flat-headed tip. After you have removed the handle, take out the middle screw which holds the barrel. After you have removed the middle screw, you can then loosen the two screws that hold the barrel. Then you can pull the barrel out of the door. To accomplish this, you'll need someone to hold the door open.

Once you have removed the cylinder from the handle, you can replace it with a fresh one. It is important to make sure that the new cylinder is the same size as the old one. You might end up with an improperly aligned handle. This can lead to a myriad of problems, such as leaks and draughts.

Many doors made of upvc feature adjustment slots that allow you to tighten or loosen the handle. These slots are usually found on the inside of the doors, near the place where the handle connects with the cylinder. The adjustment slots can be tightened using an allen wrench. After you've made the required adjustments, you can screw the handle into and put it back in its place. Then, you can test the handle to make sure that it's functioning correctly.

If the door handle of upvc becomes floppy or loose when closed, it's usually an indication that the gearbox in the upvc has broken down or internal spring components are breaking down. This could cause your upvc multipoint locks to fail, leaving your door wide open to intrusion. In this situation, the upvc gearbox will need to be replaced. This will cost between PS145 between PS145 and PS280 inclusive of labour.

This user has nothing created or favorited (yet).