Do Not Buy Into These "Trends" Concerning Replacement Upvc Door Handles Replacement UPVC Door Handles

If you're replacing the handles or need to add extra security you can find the right handle for your door. These upvc handles are easy to install and meet the required 92mm centres of multipoint locks.


The most important measurements to consider are backplate fixing centres and lever/key hole dimensions. Compare these measurements to your existing measurements prior to ordering.

Lever/Pad

Lever pad handles are made up of a lever on one side and a paddle-shaped handle on the other. These are designed to work with key wind locks, although they can also be used to split spindle multipoint door locks (though you'll need an additional dual spindle lock case).

Our selection of upvc handle lever pads are available in a range of finishes. These will be listed in the drop-down menu after you have selected the correct handle for your doors. Certain styles of handles are not available in all finishes. You should always examine the technical drawing and size sections for the specific item you are looking to ensure that you get the correct size and fit.

It is essential that when selecting the new set of upvc lever pad handles, they are in line with the PZ (distance from the spindle of the handle to the centre of the hole in the cylinder) of your multipoint door locks. This is because they need to be aligned in order to ensure that doors stay locked, whether you are looking at them from the inside or from the outside. Our handles are designed to fit a wide range of standard cylinders, however it is important to double-check before ordering.

You'll need to take off your handles that you have already installed and then dismantle the lock case if upgrading to dual spindle levers for your handle as this will require an additional split cylinder inline. You can purchase these separately. We have included a technical illustration in the images of each product.

upvc door handles is a good thing to loosen the screws that are holding the door handle you have and then inspect the mechanism. If the screws aren't loose enough it is possible to loosen them more. After that, you can take the spindle from the door handle and replace it with your new upvc handle. Before screwing the handle into place it is a good idea to check that it is in the correct position. You can do this by putting your finger in the gap between the frame of the door and the door handle to ensure that it is in a level position.

Lever/Lever

Lever door handles operate with a multi-point lock that utilizes a Euro Cylinder and are found on the majority of double doors made of upvc, aluminum doors, and some wooden doors. They are available in two types, with a lever on the interior and a paddle outside. Sprung - These include a spring cassette within the backplate to help bring the handle lever into a horizontal position. Non-sprung: They do not have a mechanism to spring the handle lever to a horizontal position.

To repair the door handle lever that is sliding it is necessary to locate the hole or detent access pin. It's usually a small hole or protruding ring or rectangular located on the handle base plate. Once you have located the hole for accessing the detent or pin, you are able to take it out using an screwdriver.

Once the handle is in a horizontal position, you can re-install the screws and tighten them so that the handle is secure on the base plate. It is also advisable to apply a threadlocking adhesive solution to the threads of the screw to increase the grip and stop them from loosing over time.

Drooping lever handles on door handles can be caused by various causes. The most common cause is that the fixings aren't tight which causes the lever bearing to pull up against the door. It could also be that the levers are not being operated at a straight angle and this is causing the latch mechanism, preventing it from fully springing back into service.

Another common cause is that the sprung lever is not functioning properly and this is usually due to the sprung not being in the right position within the backplate. The simplest way to check this is to operate the handle and see whether it changes to its horizontal position.

If your door handles are loose it is important to identify the issue fast, as this can lead to excessive wear on the screws and possibly to the handle falling off of the base plate. It is also recommended to tighten any loose screws regularly to prevent them from becoming looser.

Lever/Snib

These upvc handles are also called "Snib handle sets" and have an snib lock button located at the top of the door lever. If you don't have a dummy locking device, you can use this feature to lock the door. They usually come with a Fullex 68PZ (that's 68mm between the spindle's center and lever or lock centre) door lock. We also have a range of other door handles with 68PZ from manufacturers like Ferco and Fab & Fix.

The replacement of your door handle is an inexpensive method to upgrade your home, whether replacing existing handles or fitting new ones on doors you've built in your house. There are a variety of upvc door handle available that include traditional levers on backplate, curved or straight short latch and dummy knob handles for multi point locks which are perfect for French doors.

Lever on backplate handles are often rectangular in shape, however you can also find circular or oval shaped models that are referred to as rose door handles. These handles are identified by a lever or knob that is attached to a backplate. The backplate can be removed to allow for hidden fixing.

There is a variety of chrome and colored finishes for these handles to match your door and other hardware, including hinges, knobs, bolts and so on. Some handles have a screws that grub the knob or lever securely to the spindle. Other handles come with bathroom spindles that can be used to operate bathroom locks and incorporate a thumbturn turn and release mechanism, which is ideal for use on bathroom doors.

Mortise

The tubular latch is most likely to be the cause of this when your door handle made of uPVC is slammed shut. There are a few things that can cause this, one of which is the simple lack of lubrication on the latch plate. This can be resolved easily by simply opening the door and spraying lubricant onto the handle and lock. It could also be that the latch is loose from the backplate. This can be a bit more complicated and requires a professional to repair.

A multipoint handle is the ideal solution for a stuck door handle. The handles are positioned through the faceplate and are operated with the use of a key or thumb turn knob which activates the cam that locks the deadbolt. The handles are available in different sizes to fit different types of uPVC door, and come in various attractive finishes that are compatible with the hardware that is currently in use. The handles can be bought on the internet or through a local locksmith and are simple to install, with clear instructions.

To select a replacement handle set, you will need to be aware of the PZ size of your cylinder. This is the distance from the edge of the inner door frame to the centre point of the hole for the handle in millimetres. You'll also require the type of lock that is installed on your door, regardless of whether it is a mortise or hook lock. The easiest way to find the correct handles once you have the measurements is to use the brand filter on the website. This will help narrow down your options, and then you'll be able to select the right size.

A typical handle set comes with the handle unit with a pair of various length screws drilling guides, as well as installation instructions. Smarter versions, like the Igloohome Smart Mortise 2+ include a mortice lock with keys. These are more complex units and are best suited to professional installers or skilled DIYers. Some handle sets include various accessories, like weather strips that can be used to improve the appearance of the door.