20 Things You Should Know About Double Glazing Window Locks Repairs Double Glazing Window Locks Repairs

Double glazing window locks repairs are essential to ensure your home is secure. Faulty handles and hinges can allow drafts to enter your home, making your windows vulnerable to burglars.

You can, however, repair rigid uPVC locks or handles without having to replace your window or door unit. Often, simply cooling or lubricating your mechanism can resolve any issues.

Broken Glass

Over time, double-glazing window locks wear down. The handles can become difficult to open, or even lock shut. This can lead to problems with ventilation, and could also could pose a security risk. It's important that you get the window fixed as soon as you can.

Double-glazed windows consist of two or more glass panes, with a gas between them to provide insulation. Seals also hold the panes together. If you notice condensation between the glass panes, it is likely that one of these seals needs to be replaced. It is usually only replacing one window pane, which is much cheaper than replacing the entire glass window.

A blow-up seal inside a double glazed window usually causes cloudiness and condensation. This could be due to a number of reasons, including air leaks or excessive moisture in the house. It is important to call a double glazing specialist to fix the gas and seal in your double-glazed window immediately you notice this problem.

It is possible to replace a single pane of double glazing glass, but it is not recommended to do this without the help of an expert. This is due to the fact that it requires special tools and the proper expertise to do the job safely. It is possible to damage the window frame or even your health if trying to do it yourself.

A lot of people utilize a crowbar in order to open their double-glazed window when it is stuck, but it will typically cause the window frame to be damaged and swollen. A specialist in window repair can remove the handle from your window and then open it without causing any further damage. They can also change old window mechanisms to modern ones.

As time passes, window hinges can become stiffer and more difficult to open, especially when the area is noisy. It is essential to regularly lubricate your window hinges with silicone spray. Do not close the window using the handles or by closing it with a lot of force. This could damage the hinges.

Broken Sash

This is a typical issue for older double glazing windows. It is sometimes difficult to lock and open a window when the upper sash has fallen out of its pocket. This is usually due to pins being disengaged or a balance shoe is disconnected. Each sash is different and therefore it is essential to understand how yours is configured before you attempt to fix this.

This can be solved by removing the sash and then cleaning it thoroughly. This will also reveal if it's still a good fit. If not, you'll have to add sash stops to help hold it in place. These can be purchased on the internet or at many hardware stores. After cleaning the sash you can replace the parting bead and lubricate the pulley axles by using Teflon or silicon spray. Label the weights before removing them so you can reinstall them in the correct way.

A damaged handle is another common issue. It can be difficult to determine if your window handle is broken However, there are a few indicators. If the handle feels stiff or clunky, or isn't secure, it is likely damaged.

It could be due to lack of use, or the handle could have been damaged or broken. In some instances, the handle may be broken internally and unable to be repaired. However, it's still worthwhile to attempt to fix the problem as soon as possible.

You may have to unscrew the hinges that connect the window sash to the frame in order to take it off. This can be a challenging job, so it's crucial to have someone to hold the sash and ensure it is steady. After removing the hinges it's important to clean them as well as the areas around them. You should also try to attach the hinges again and check the handle to make sure that it's functioning correctly. If it's not it, you might want to think about replacing it. This will ensure that your window is as secure as possible.

Broken Handle

It is not common for a window handle to break or become damaged over time. Therefore, it's crucial that damaged handles are repaired as soon as possible to avoid inability to function and security issues.


Fortunately window handles are relatively easy to replace. Unlike a sash, which requires a number of bolts to secure, a window handle is secured with two screws, making it a simple DIY project for anyone with a little of know-how. It is essential to test the handle after it's been installed to make sure that it works properly. This includes locking the handle and examining for any gaps that could allow drafts in or criminals to gain access to your home.

The most common reason for a window handle that is broken is that it's simply worn down by repeated use. However the force or stress that is applied to it can cause a broken handle. If you force the window to open, it could put additional strain on the handle. This increases the risk of damage.

Other reasons for a damaged handle include inadequate maintenance, ageing or design issues. The handle can wear out prematurely because of the absence of regular cleaning and oiling. This is typically caused by dirt or other debris that has built up over time. In addition the handle could be damaged by improper installation and alignment issues.

If the fixes previously mentioned don't work and the tasker isn't able to solve the issue, the Tasker may require access to and take out the lock mechanism itself. This may involve removal of the frame, or 'breaking out' the existing window frame and plastic bead (to allow more room for wiggle room). The replacement lock can then be adjusted to match the profile of the uPVC handle. Once this is done the new handle can be put back on and the procedure is completed. If this is the situation, the Tasker will provide a quote for repair costs.

Faulty Lock

It is crucial to repair any broken window locks as soon as you can. A broken window can cause the door to open, causing draughts and make your home more vulnerable to burglary. Window lock repairs are typically minimal, but it's recommended to contact a professional before the problem gets worse and cost you more money.

UPVC window handles are available in two styles: cockspur handles and espagnolette handles. The first utilizes an internal rod to operate the cams in a mushroom shape that lock into window frame keepers. The lock's mushroom cams are activated by a handle attached to the spindle. The latch of the lock is then clipped into the mortise of a window frame's catches.

Both types of UPVC windows locks are at risk for damage, particularly in older homes. This could happen when the sash becomes warped or misaligned, or even becomes loose. In double glazing repairs near me , the lock must be replaced to prevent draughts or loss of energy efficiency. A Tasker can replace the damaged lock for you, leaving you with the security of knowing that your windows are safe from burglars.

The first thing a Tasker does to fix your double glazing window lock is to examine it and determine the issue. Once they have the necessary information, they'll prepare their tools prior to coming to your home. They'll usually bring a Phillips-head screwdriver, needle-nosepliers, wood putty and fine-grit paper.

Tasker must loosen screws that secure both pieces of the lock on the window frame, if the sash isn't aligned properly. The Tasker will then remove the latch and then fill the mounting holes (if necessary) with wood putty, after which they sand the area to ensure it is identical to the rest of the frame.

If the lock is rusted, they'll clean it using wire brush or oil and then lubricate it with grease to keep it working smoothly. They'll also check if the latch is in good condition and replace it.