Are You Responsible For The Double Glazing Lock Repairs Budget? 10 Terrible Ways To Spend Your Money Double Glazing Lock Repairs

Good locks on your windows and doors can stop burglars from getting into your home. They don't usually like to break glass or attempt to squeeze through windows.

However, some double-glazing owners have had issues with their door or window lock after it's been installed. Fortunately, these issues are usually fixable and don't require to pay for new double glazing.

Broken or faulty locks

A locksmith can repair your uPVC window lock or door lock if it is broken or faulty. They can repair the hinges, striker plates and locks on your double-glazed. They will also be able to adjust the cylinder's position to fix any misalignment problems that may be causing your handle to not operate correctly.

If the key fits in the lock but it won't turn or is difficult to insert the mechanism could be stuck. This can be due to dirt or grime getting stuck in the mechanism. If this is the case, then it is possible to clean the lock and then lubricate it. Make use of a dry lubricant, such as graphite or teflon and not oil, as oil attracts dirt and cause it to stick to the mechanism's inside. After you have lubricated the lock, you need to insert the key and then try to turn it. The lubricant needs to get into the mechanism and the lock should be able to turn effortlessly.

Screws that are loose within the lock mechanism are a different reason for a malfunctioning lock. They can loosen and break off or fall out completely and stop the lock from working properly. A screwdriver is a tool to tighten these screws, however, care must be taken not to over-tighten them since this could damage the internal components.

A damaged lock could be dangerous for you and your family members, especially if you have young children. It can be easy for them to unlock the door without you knowing, and this can allow them access to your home. If you're worried about the possibility that this could happen, a vetted professional locksmith can help to secure the double glazing doors.

Misty Glaze are a professional uPVC and double glazing company based in Lancing that can fix all types of faulty and broken mechanisms, handles, cylinders and lock systems on uPVC windows and doors. We can also reconfigure your uPVC or double glazing locking system to meet your specific requirements, which means that in most cases, replacement windows and doors are not necessary.

Handles that are damaged or damaged

As part of their overall security package many double-glazed windows have a multipoint lock. This is a great choice for those who are concerned about potential thieves who may try to gain access to your home. Ask your locksmith about antilift blocks. They can be put in in addition to existing locks and will ensure that your windows are securely shut.

Handle locks are usually damaged or fail. They are the first part that a criminal will employ to open your window. The good news is, this is one of the easiest parts to fix.

Modern uPVC handles as well as aluminium handles come with a multi-point locking mechanism known as Espagnolette, which is designed to prevent forced entry. This security upgrade is available as an option on new uPVC windows. Older style uPVC and aluminium handles can be upgraded to lock systems that shoot bolts also as an optional option on double-glazed windows.


It is essential to fix handles as quickly as you can if it's damaged. The damaged handles could stop the window from closing properly and allow drafts to enter. double glazing repair Epsom can also be a flaw that thieves who are opportunistic could take advantage of and put your family's possessions and your personal belongings at risk.

To fix the malfunctioning mechanism, you must first access the window frame, then take off the broken handle. The gearbox is then opened to identify the type of gearbox that is used to open the handle. This will allow a replacement that matches the profile and the internal window frame mechanisms.

After the mechanism has been replaced the handle can be re-attached using the original screws however, we generally recommend replacing them with longer ones because this will ensure the most secure fit. The final step is to apply a layer of clear sealant in order to protect the handle from further rust. Once that's done the window will be functional again and at less than the cost of replacing the entire window.

Broken or damaged hinges

If your windows do not close properly, you may suffer from draughts or the weakening of your home's security barrier, and an increased chance of damp or water damage. Window hinges that fail or fail to function properly are a common issue and can be easily repaired.

If you have a uPVC window that isn't able to open or close it's likely that the hinges are damaged or broken and require replacement. While most window manufacturers require that you purchase a new window unit to fix this simple problem, we're able to replace the hinges that are damaged and save you money.

Window hinges may break from repeated use or they could be weakened due to corrosion over time. If you find a broken hinge, it's important to take measures to prevent further damage by taking care not to make the window swing to open or close.

Knowing the type of hinge you have will help you find the correct parts to fix it. Maco, Mila and Roto are all window hinges. It is recommended to speak with a professional in this case so that you don't make the mistake of purchasing parts that are not compatible with your current hardware and cause further damage.

A faulty hinge is a major problem for uPVC doors and windows. They can be a significant source of noise and also allow for water infiltration that can cause damage to your windows.

To fix this issue, first verify whether the pin barrel on both sides of the hinge is aligned. If not, tap the headpin with the hammer to make a slight bend in the hinge barrel. This will help keep the pin in place. A friend can help you hold the doors while you take off hinge screws and hinges. Replace the hinges and attach screws using glue. Finally put the hinges in place using clamps or weights while the glue sets.

Once your hinges are repaired after which you will be able to put back the door and then reattach the handle. It is a good idea to replace the screws with the same length of dowels as the original screw, so that they match up with each one.

Glass that is broken or Faulty

uPVC Windows can become damaged over time, even though they are great at keeping out the cold and retaining warmth. This can be the case with broken or damaged glass, as well as damaged locks. If left unattended, this can be a costly problem. This can also detract from the aesthetics of your home and lead to a loss in insulation. It is crucial to repair any damage immediately.

If the glass is cracked, but not broken it is possible to fix it yourself with the proper tools and techniques. First, ensure that the area around the glass is clear so that any shards won't harm anyone and aren't an accident hazard. Next, remove any broken pieces and dispose of them appropriately. Then, place masking tape to the entire area to keep pieces of glass from scattering and sticking to your skin when you move them. If you're dealing with a double-pane window it's a good idea to pre-fit the pane of glass before gluing it back into place so that you know you'll have enough space finish the project.

Before applying the glue, clean the surface of the broken frame and glass with a a dry, clean cloth. Follow the instructions for application and curing that can differ from product to. Depending on the degree of the crack you may want to clamp the glass to hold it in place while it is curing. You can do this using lightweight clamps that are designed to hold delicate materials.

After the adhesive has cure, carefully insert the glass into the window frame. Make sure it's in line with the frame edge and that there aren't gaps between the glass sash and frame. Be careful to avoid flexing the window when it's being reinstalled, as this can weaken the seal and cause water infiltration and condensation.

If you have a glass door that's broken completely or has bigger cracks, contact a professional glazier like O'Brien(r) to arrange the replacement. It's important to act quickly in the event of broken glass.