10 Facts About Window Repair That Insists On Putting You In A Good Mood Why Window Repair Is Necessary

A pebble that is thrown by the lawnmowers or a heavy drink that is set on your glass-topped coffee table are just one of the many things that can cause cracks in glass windows. A damaged window allows rain, wind insects, and other undesirable elements to get into your home.

Although it is impossible to make a window that has been damaged completely invisible, there are ways to fix it and stop it from spreading further.

Water Damage


If water is getting into your windows it is likely that a replacement is required. The moisture can cause damage to the wood in the window frame and cause rot. It can also reduce the energy efficiency of your windows. A reputable window replacement company can replace your frames without damaging them.

Wood rot is another issue that can affect both the interior and the exterior of your window. If you have wood windows with spots of rot, it might be possible to repair them if they're not terribly damaged. If the rot has reached your muntins and mullions, (the parts of the window frame that hold your glass panes) You may have to rebuild the windows. This could cost more than a new set of windows.

A damaged seal between the double-paned window panes is another common problem that requires replacement. This could be caused by condensation or debris that has formed between your double-paned windows, or an indication that the insulation inside your window has gone out of date. A lot of modern windows have insulation built in. They won't have the same problems as older windows with multiple panes.

The ugly casings, like ones that are loose, cracked, rotten, or missing, can cause other problems. It's not necessary to replace your windows if your casing is damaged. You may be able sand it and then repaint it to enhance its appearance based on the condition and surrounding wood.

If your exterior casing is damaged it is possible to apply a new coat of weather-resistant exterior painting to keep moisture from damaging the window. Alternately, you can put in new exterior casings to offer an attractive and functional upgrade to your home.

Paint that has peeled or chipped

Window sills and frames are often in close proximity to the elements, which means they can take a lot wear and tear from rain and sunlight. Moisture is the primary reason for the peeling of paint around windows, particularly if the wood is exposed. Water seeps through the wood, and once it evaporates the pressure beneath the film of paint causes the paint to peel. The moisture can be caused by condensation in the interior or snow and rain outside. Whatever the cause it's essential to scrape and sand the wood and then repaint as soon as the paint begins to chip. Some meticulous painters apply a water repellent preservative on the wood, and then thin boiling oil prior to painting. window repairs will help slow moisture penetration into the wood, which will help the new paint to hold better.

When paint begins to chip, it's time to consider repairing your window. Before applying a new coat, place a drop cloth or tarp on the area you're working to catch any loose drops of paint. Get rid of any paint that has fallen off using an utility knife. Be careful not to cut the wood beneath or cut into the sheathing. Clean the area thoroughly and allow it to dry completely.

After the area has dried and dry, you can sand it with a fine-grit sanding block. This will prepare the surface to receive primer and create a surface ready for paint. Make sure you have the appropriate safety equipment if you're using lead-based paint. Tape off any surfaces that are close to the sanded surface like baseboards. This will shield them from paint.

You can then prime and paint according to instructions on the tin that you are using. Follow the curing and temperature instructions on the can of paint, as they will vary depending on the type of paint. Paint the exterior using exterior-grade paint, and the interior surface with interior-grade paint.

Repairing damaged or peeling painted frames is a cheaper alternative to replacing frames. If your window frames are damaged beyond repair however, it could be worthwhile to upgrade them to newer, more energy efficient windows.

Cracked Glass

A broken window could leave your home vulnerable to rain, wind bugs, and other unwanted critters. You might be tempted to just replace the glass, but you can also fix it yourself if there isn't too severe of a crack or break. You should address small cracks right away, before they become more severe due to temperature fluctuations or time.

There are a variety of ways to make broken glasses almost invisible. But this isn't something that can be completed by an amateur. A small crack can cause a weakness in the glass, which could eventually lead to more breaks and a larger replacement. Covering the crack with plastic is a good solution. The plastic covers the crack from the outside, preventing air or moisture from getting through. This could damage the frames or seals around windows.

Put on your safety glasses and gloves before removing the broken glass from the frame. You'll require a utility knife, scraper or chisel to get rid of any glazing points that pin the pane into position. It is also recommended to employ the knife to cut out any wood that is unfinished and then clean and seal the area with Linseed oil or a clear wood sealer.

You can then apply epoxy to glue the glass back into place. This method is the most time-consuming, but will give your glass a more robust appearance. When using epoxy, choose the double-cylinder model that distributes the resin and hardener in the same proportion. This allows you to control exactly how much is applied to the glass which helps ensure a good seal.

When resetting double- or triple pane windows, make sure the gas fills are intact. These gases are important for insulating your home and ensuring that heat is kept in during winter and out in the summer. If you remove the glass, those gases escape through the crack, causing the window to lose efficiency. You can replace the gas fills using the same method used to repair cracks in other types of glass.