"The Upvc Door Handle Replacement Awards: The Most, Worst, And Strangest Things We've Ever Seen Choosing the Right UPVC Door Handle Replacement

It's simple to replace your upvc handles, but choosing the right handle can be difficult. The majority of modern double-glazed handles have spring cassettes built into them but older ones don't.

If the upvc handle on your multipoint lock is loose and floppy, it could be an internal problem. This article will discuss several possible causes and the potential solutions.

Handles that are drooping or sagging

uPVC handles are susceptible to wear and tear. This is especially the case in older properties. The most common reason the handle becomes floppy due to a damaged spring cassette inside the door lever. This is caused by excessive force, and the square spindle that holds the cassette may be moved or turned round.

The good news is that replacing the door handle with uPVC is an easy task and can be done within a couple of minutes. The first step is to disassemble the handle unit that was previously installed by removing the fixing screws that are visible on the side of the lever plate. Once the handles have been removed, you can take them off and replace the cassette.

You can find a wide variety of uPVC door handles to choose from on the internet and a lot of them are available in various finishes. The finish you choose will determine the longevity of your handle and how it is easy to clean. Finishes like PVD, Stainless Steel or Resista are designed to withstand corrosion and will last for up to 25 years.

Once you've selected the color or style, you can choose the kind of handle you want. The most popular types are lever and pad arrangements. Lever pads are often used to block access by unauthorised persons. They are equipped with both a lever inside and a paddle out.

Then, take a measurement and note the dimensions of the handle you currently have. You'll need to know the PZ dimension (the distance from the screw hole to the middle of the lever) and the length of the handle, and the dimension of the keyhole. You can compare the measurements to the handle size matrix to determine the right replacement.

Broken springs

Over time, uPVC door handles may become wobbly or loose and occasionally the spring cassette inside could break. These tiny springs help move the lever to a horizontal position. without them, doors will not lock properly.

Modern uPVC handles come with these cassettes built into the back plate. However, older uPVC doors typically have these springs built into the actual lock mechanism. This isn't something you can be fixed by yourself but it is worth getting your locksmith to look at as this could be the reason behind the drooping or sagging uPVC door handles.

One of the most common problems with uPVC door handles is that they get loose or wobbly over time. This is typically due to worn springs which can be easily fixed. Most often it is due to excessive use of the handle and as a result the square spindle in the handle will wear out, causing the springs to be displaced.

To fix this issue, open the door and remove the fixing screws at the back of the handle plate. This can be accomplished using a Philips screwdriver and once the screws are removed the handle can be removed and the plates pulled apart carefully. Then, you can remove the springs that were in use and replace them with fresh ones.

It is crucial to keep this in mind when buying a replacement handle. This measurement is known as the PZ and it is crucial to use a measuring tape that is calibrated to ensure an exact reading.

After replacing the springs, you should be able operate the handle with no problems. However, it's always worth lubricating the internal mechanism to ensure that everything works exactly as it should. This will ensure that your uPVC door is as safe as it can be, and also increase their comfort as time passes.

Handles that slide around

Handles that slide are caused by a variety of factors. One of the most common causes is when the levers of the handle are not aligned with the lock. This can happen on both uPVC and composite doors, but it is typically more evident on older doors because they are typically made of cheaper materials that don't stand up well to the elements.

This issue can be resolved by a professional, who will re-align the handles and ensure they're in line with the door lock. They'll also inspect the lock itself to see if there is anything that needs fixing. In many cases, a small adjustment to the handle springs can solve the issue.

Switching your uPVC door handle is simple enough, but it's important to take the measurements of the handles that are in use to make sure you have the right size replacement. You will need to measure the distance of the two screws, the size of the keyhole and lever, as well as the distance between them. You can then use this uPVC handle size guide to find the appropriate replacement for your home.

After you have made the measurements, remove the old uPVC handle. This is typically quite simple and requires just a screwdriver get to the screws on the inside of the door. After the screws are removed, you can then unscrew the handle itself and then install the new handle.

Before you begin, it's worth ensuring that the door is securely open with a door wedge to stop it from closing in the middle of your work. After removing the handle, you will be able to access the parts underneath the door that are causing the door to slip.

If you don't have the patience or nerves to tackle this task yourself, an expert handyman from Fantastic Services can help. They will use specialist lock picking techniques to unlock the doors without causing damage. Then, they'll replace the damaged handle and make sure everything is working exactly as it should.

Gearbox damaged

A damaged gearbox may cause the door handle made of upvc to become stiff or lose its functionality. This could also stop the lock from being able to be opened with a key. This is a risk and must be addressed as quickly as possible. If you are unable solve the problem yourself it is essential to get in touch with a locksmith because they are experts and have the tools to do the job correctly.


The first step is to unhook the handle from its cover plate. This can be accomplished using a screwdriver that has a flat head. After you remove the handle, remove the middle screw that is holding the cylinder. After removing the middle screw, you'll be able loosen the two screws that hold the barrel. Then you can take the barrel out of the door. You'll need to open the door to accomplish this, so be sure to have someone available to assist.

After removing the cylinder and replacing it the cylinder with a new one. It is crucial to make sure that the new cylinder is the exact size as the previous one. You might end up with an incorrectly aligned handle. This can lead to a myriad of issues, such as leaks and draughts.

A lot of doors made of upvc have adjustment slots which can be used to adjust the handle's tension or release. They are typically located on the inside of the door near where the handle meets the cylinder. The adjustment slots can be tightened with an allen wrench. Once you have made the adjustments then you can put the handle back on and screw it in. Then, you'll be able to test the handle to make sure it's working properly.

If the door handle of upvc is loose or sloppy when it is closed, this is usually an indication that the gearbox in the upvc has broken down or internal spring components are breaking down. This can cause your multipoint locks made of upvc to fail and leave your door open to intruders. If this occurs, it will be necessary to replace the upvc gearbox. upvc replacement door handles Repair My Windows And Doors will cost between PS145 between PS145 and PS280 inclusive of labour.