20 Kia Picanto Key Fob Replacement Websites Taking The Internet By Storm How to Replace a Kia Sportage Replacement Key

For many Kia models keys, the key has a built-in keyless entry system. This key usually resembles a remote control and can be exchanged with a fresh one from an Kia dealer or a locksmith.

Key fobs are prone to malfunction for several reasons, including an empty coin battery worn buttons or buttons, water damage, signal interference and a faulty receiver module. Here are replacement kia key fob to help you get your Kia sportage replacement key to work once more.

How to replace the remote key or the smart key?


It doesn't matter if your Kia is equipped with an intelligent key, remote key, push to start key, or a regular non-transponder steel key the battery in these keys will eventually require replacing. This is especially relevant if your vehicle displays a message that indicates that the remote or smart key is not powered by the battery.

It's a relatively simple process. To replace the keyfob battery remove the mechanical key from the slit at the back of the fob. Then, you need to pry the cover off. Inside the key fob, there will be the small screw that holds the battery in the correct position. By using a small screwdriver unscrew the screw and remove the old battery. Then insert the new one and close the slit in the key fob.

When the key fob is equipped with an updated battery and you've tested it, press the locks and unlock buttons. You're good to go If the doors lock and unlock as expected. You can now take advantage of your Kia's hands-free lock/unlock feature when your fingers are cold or you need to make errands in Brandon.

Note: Some key fobs (transponder chip or smart keys) may need to have their programming completed. This requires a machine for programming which is available to the locksmith who works for the automotive dealer. Other keys (non-transponder metal keys) don't require programming. If you need to reprogramme your key, it is necessary to record the key code number on the tag for the key code.

How to replace the battery

If your Kia key fob is not responding when you press the lock or unlock button on the fob, this is a good indicator that the battery needs to be replaced. A low battery may also cause other issues such as the check engine light turning on or delayed engine cranking. Fortunately replacing the key fob battery is a fairly simple DIY task that requires only the most basic tools.

Before beginning the process ensure that your vehicle is turned off and that all doors are closed. Find the small, metal or plastic piece on the bottom of the key fob. Then, jiggle it until the key pops out. You can then insert this key into the handle on the door of your driver to open your car.

To replace the key fob battery, remove the cover on the rear and use a pry bar tool to release the latch holding the black negative battery cable. Remove the old battery, and then orient the replacement battery to ensure that its "+" side faces you and the "-" negative side is facing the fob's electrical contacts. Avoid using excessive force when pushing the new CR2032 into position to avoid damaging or bending the metal contacts.

After you have installed the new battery then turn the key fob off and on in the ignition until the door locks cycle. Then, test your Kia key fob and see whether it's working again.

How do you replace the smart key?

You could have a standard keyfob, or a Smart Key based upon the model of Kia Sportage. The smart key comes with an embedded mechanical key blade, unlike the standard key fob, which does not. Both kinds of key fobs contain an internal battery that will eventually need to be replaced. It's a fairly simple process that takes just two minutes.

Before you start it is important to make sure that you are on a level surface with enough lighting and that the Kia is off. Remember that the fob can contain small pieces that could be thrown off if you're not careful.

The first step is to find the small release button that is located on the lower backside of the fob. It could be an oval silver button or a rectangular slot. You can open the key fob by pressing the button.

Once you have the key fob open it is easy to remove the old battery and replace it. The new battery is a the CR-2032, and it can be purchased from a local or online auto parts store. When you're done, the key fob should permit you to lock the vehicle, unlock it, and then start your vehicle even if it's not running.

How do you replace a broken mechanical key

The Kia key fob is a great feature that lets us lock and unlock our car with the press of one button. But, as with all devices, it can have problems at times. Luckily, there are methods to solve these issues and ensure that our key fobs are in good working order in the long run.

One of the most common problems is a dead or dead battery. The battery could cause the device to stop working or operate intermittently. If this happens you should replace the battery with a new one.

If this doesn't resolve the issue then try using a normal flathead screwdriver to wedge open the casing of the fob's plastic. Be careful not to damage any internal components or scratch the plastic. Once the battery is opened, carefully remove the old battery and replace it with a brand new one.

Close and open the door with the mechanical key. (Every kia fob comes with an emergency mechanical key that fits into the slot). Test the key fob to confirm it's functioning properly. Contact a dealer locksmith to address the issue when the fob still is not working. Make sure they cut you an emergency key that can work in all the trunk and door cylinders to avoid future lockouts.