A Provocative Rant About Sliding Patio Doors Repair Sliding Patio Doors Repair

It is possible for sliding patio doors to be difficult to open and close. This can be due to a number of issues, such as dirty tracks or improperly aligned rollers.

Clean the track first and lubricating the rollers. You can also re-align the rollers by using the adjustment holes on the bottom of the door panel with movable doors.

Dirty or Damaged Track

A sliding door that doesn't slide properly can be caused by a dirty or damaged track. Over time dirt, grit and even rust may accumulate making the track unable to slide smoothly. The solution is to clean the track thoroughly with a brush and mild detergent. It is best to do this task frequently to ensure the smooth operation of your door, and to avoid the need for costly repairs later on.

A leaking door is another common problem that requires immediate attention to prevent mold growth, water damage and structural degradation. The most common cause is worn weather stripping and doors that are not aligned properly, which can be corrected by replacing the weather stripping and by aligning the door.

Rollers that veer off the track are another frequent issue that can be repaired with a simple DIY work. Get a partner to assist you in this endeavor, as the door can be heavy. In the house, and then lean a panel towards you to shift the rollers. When the panel is lifted off the bottom track, it's time to place it on sawhorses in order to prevent it from falling off. Then, loosen the screws that hold each roller in place and remove them with a screwdriver. You can now clean any dirt that is caught between the wheels and the tracks. Then, clean each wheel with denatured alcohol and an rag, and then reposition the wheels and reconnect them to their tracks.

It is possible to straighten bent track sections with a rubber mallet, and a block of wood. However in the event that the bent portion is located near the hinges and is likely to cause further damage, you'll better off calling a professional to ensure safety.

Misaligned Rollers

If your sliding door is sliding poorly, it's likely because the roller wheels are misaligned with the track. The wheels may be dirty or rusted, and their bearings wear down. This friction causes the door to snag and grind when opened or closed. This can also result in the sound of squeaking.


This is a straightforward fix. The wheels are on the bracket, which can be adjusted, which means you don't have to remove the door. Locate the holes for adjustment (usually on either side of the frame) and use a screwdriver to rotate the screws that control the wheels. A clockwise rotation of the screw raises the wheel, while a counterclockwise movement lowers it. Continue to adjust until the door moves effortlessly and quietly when it is opened or closed.

It is essential to adjust the wheel before adjusting your latch. To ensure that the lock functions properly the latch hooks have to be aligned with the strike plate. If you don't, the latch could accidentally open or close when you're out of the room.

Patio doors that slide are a major investment, and keeping them working properly will keep your family safe and secure. By addressing common problems like faulty tracks, rollers and handles, you can prevent expensive repairs in the future. For assistance with your patio doors, get in touch with our team. We can help keep your sliding patio doors in good condition by evaluating the repair requirements. Our professionals can also assist with any replacement parts you may need.

The door frame is sagging or damaged

Sliding patio doors make a fantastic addition to any home and provide a stylish and practical alternative to swing-open or hinged patio door options. Like any other hardware, they may experience many issues in time. Fortunately, a lot of these issues are easy to fix using a bit of DIY knowledge.

A gap in the frame is a common issue with sliding patio doors. It could be due to a variety of reasons, including a rollers or tracks that are not aligned properly or a damaged track door, or a bowed door frame. In most cases the root of the issue can be resolved by removing the door and re-attaching the track or rolling elements. This should be done with extreme caution to avoid harm the track or frame.

In certain situations, it may be necessary to replace the entire track. This can be easily accomplished using an universal replacement kit that is available at most major hardware stores. sliding patio door repair near me are simple to install and will have your door working correctly in no time.

Examine the hardware of your sliding door and frame for signs of wear, like loose bolts or screws. This is a straightforward and efficient DIY patio maintenance task that is done using the help of a screwdriver. Additionally, it is important to grease your rollers and tracks to facilitate smooth operation and prevent premature wear.

For many homeowners the patio doors are the main entrance to their backyard and outdoor living space. In order to maintain peace and security within the home, it's important that they function properly. By following these simple DIY maintenance tips, homeowners can prolong the life of their patio door and save money on repairs or replacements.

Faulty Handle

Sliding patio doors are the perfect way to access your backyard and to enter your home, but they can be difficult to operate if they are damaged or misaligned. A defective handle could cause the door to get stuck or be difficult to open and close. The good news is that repairing a loose handle is a fairly simple job that can be accomplished at home.

In most cases the reason for a loose grip is the result of screws that have slipped out of the backplate. To fix the issue tighten the screws that are on the inside of the handle using a screwdriver. If you find that the handle is still loose, it could be an indication that the threads are worn and will need to be replaced.

Alternatively, a broken latch could be the cause. It is more likely to occur if the latch is made of plastic instead of metal. If the latch isn't turning or catching it, try oiling it first to see if this aids. If not, you might have to replace the lock entirely.

Finally, the handle itself can become difficult to operate if it is broken or damaged. If this happens, you will have to replace the handle with one that matches the style and design of your sliding patio doors.

Feldco can help you restore your patio doors to their former glory, whether they are brand new or old-fashioned. We have high-quality doors available in various sizes and styles that can be adapted to perfectly fit your home. Contact us today to learn more about our products! We provide homeowners with our services in Southern California, including Ventura County, Orange County & San Diego County.

Afflicted Weatherstripping

If you're seeing light in windows and doors that are closed or feel a draft pushing against the door or window It's time to change your weather stripping. The strips form a tight seal that keeps unwanted insects, air, and water from entering your home. This keeps the conditioned and heated air inside, saving you money on energy costs.

It could have lost its strong, bouncy seal due to aging. This is easy to diagnose by taking a dollar bill and putting it under the seal along the top of the door frame and below the jamb of the door where they overlap. If the dollar bill slides effortlessly between the seal and the door, it's time to replace the weather stripping.

It's tempting to cut out just the worn area of weather stripping to replace it, but this will cause cracks on both sides of the new stripping and could cause issues with the seal in the future. It's more efficient to replace the entire stripping to ensure that you are able to rest knowing your door is properly sealed once again.

To make a DIY project that is simple follow our guide on weather stripping to take off the old weather stripping and then apply the appropriate material to your sliding patio door and door frame to ensure a long-lasting, tight seal. It's a great option to fix your door and reduce your energy bill and you shouldn't put off the project until it's too late. Your wallet and your home will be grateful.