5 Windows Repair Leçons From The Professionals How to Get Your Windows Repair Done Right the First Time

A storm that is severe or a stone dropped by the lawnmowers or a mishap at home can cause your windows to crack. You may be able to make do with a few temporary fixes until a Mr. Handyman of Anne Arundel and North PG professional arrives to repair the damage.

The use of clear masking tape or packing tape can prevent superficial cracks like spider cracks from getting more severe. Make sure you tape both sides of the crack.

Frames that are rotten

The rot of wood around windows is not only unsightly however, it could also be a safety hazard. It can also decrease the energy efficiency of a home. The frames that are rotten can let cold air to enter your home and warm air to escape, causing you to lose money. The reason for this is that the rotting wood allows moisture to enter and weaken the interior frame, reducing its ability to hold cool or warm air in your home.

In addition, a weakened window frame can leave your home vulnerable to intruders who are able to easily break the window and gain access to the interior of your home. This type of damage can be prevented by repairing and re-building your wooden windows. Your home will be more attractive and secure.

It's important to repair your window sills or frames made of wood as soon as possible, before the problem gets worse. The first sign of rot will be visible cracks or discolorations of the paint. The wood might feel soft, or it could be that mold can form on the inside of the window frames.

If you notice any of these problems, it is imperative to call in an expert to examine the damage and repair it as soon as you can. Wood rot spreads quickly, so the sooner you deal with it, the less costly and less difficult to fix. If you put off addressing it until all the wood is rotting away and is unaffordable to fix.

Fortunately, windows with rotting frames and sills can be fixed in 99% of cases where the rot has been caught early. Our technicians are highly skilled and can replace the rotting parts of the frame to give windows that look as new.

Muntins and Mullions

The mullions and muntins which create a barrier between your window panes isn't just ornamental They also serve to support the glass. They are a common part of windows that can be damaged or even broken. They can be fake or real, if your mullions and muntins get cracked, chipped, or dented it is imperative to get them repaired because they could be a significant detraction to the look of your home.

Muntins & Mullions


Although they appear similar and are often mistaken for one another (perhaps the alliteration can help) Multins and mullions are two distinct window components. A reputable window installation company explains the differences between them to avoid confusion and confusion.

Mullions, also known as partitions between glass panes are a typical component of traditional multi-pane windows. In the past, they were utilized to support and separate large sheets of glass. They are used as an ornamental element and as a style in your home.

The mullions on your windows are not the most durable, but they do offer some security. If a burglar is able to break the window pane, he will probably break the mullion to gain access to your home.

Broken mullions and muntins can be repaired using putty. Window repair professionals clean the surface and apply fresh putty before re-securing them. This is a straightforward repair that won't alter the performance of your window.

If your windows are leaky or aren't closing and opening properly, there may be issues with the sashes, or frame. Certain sashes are stuck in frames due to broken springs or cords. The sashes could also be too heavy or they may have slipped off the track. A sash that is hard to lower or raise can usually be repaired by balancing the weights and springs.

The wood strips that hold a single sheet of glass in position on a window that is older are called muntins, or mullions. If they begin to decay they will require you to replace them. Window repair specialists can replace the damaged muntins or mullions and they won't interfere with the functionality of your windows.

The sills of older windows might not slope downward enough to allow drainage of water. Check the sill to make sure that it slopes away from the house. If it isn't then a drip cap could easily be installed. This simple procedure can lower the chance of water infiltration.

window repairs

If your window sashes have stopped functioning correctly, it is important to investigate the issue. The weather and the time can have a direct impact on wooden window sashes. If they don't open properly, water or air can easily enter the room. A similar event can cause aluminum sashes to become ineffective. The dampness and sweating around windows are typical signs of these issues.

The most common cause of issues with sash is simple wear and tear. They can be addressed by sanding and filling the area before re-painting. However, more serious problems will require the removal of the sash. This is a job best left to a professional window repair company.

The sash is disassembled by removing the locking pins from the top of the window frame, and removing the sash cords. Then, you need to remove the parting bead (vertical strips holding the upper window sash). Then, pull out the upper window sash. Once the sash has been removed, it is possible to remove and store the hardware for the sash.

The mortise and tenon joints in the sash are held by wooden pegs. Remove the pegs using a hammer and pin punch. Often one side of the peg is larger than the other, and should be driven away from the smaller side to avoid damaging the sash.

Once the sash is completely dismantled, you will be able to observe the pockets that are holding the glass panes. The pockets are typically pinned or screwed into place and must be gently pulled out with a sharp knife.

The sash is then ready to be painted with a new compound. The artist beds the sash by putting it against an easel and working the compound into the groove or rabbet, around the opening of the pane. Once the sash is bedded it is left to dry for two days before being put back together. The sash is then treated with a homemade wood preserver made from one-half mineral spirits and one-half boiling linseed oil. This can help reduce the amount of draughts that enter and improve the ability to close and open the window.

Drip Caps

Drip caps are simple, nearly invisible caps that draw water away from window frames during a rainstorm. They are typically made of wood, but they can also be constructed from bricks or other masonry materials. Some drip caps are designed with aesthetic appeal, whereas others are more functional. No matter what the design, a good quality drip cap must be strong enough to withstand the elements and stop water from leaking behind the casings, where it can cause wood rot.

A drip cap can be easily installed by a homeowner with the use of a few tools and a little know-how. However most homeowners prefer having an expert contractor install their drip cap. A drip cap must be nailed to the sheathing around the window, at least an inch from the trim board and should be sloping away from the window. It is important to use galvanized nails, and to apply a high-quality exterior sealant that is suitable for the underside of the drip cap as well as the sheathing.

Homeowners can make drip caps at home with a sheet aluminum, a vice, and a few basic tools. To make this happen the homeowner has to first remove or cut a row of windows. Then, they will be able to cut the drip-cap to a length slightly wider than the size of the window. Once the drip cap has been cut, it should be placed beneath the flashing tape and nailed to sheathing with galvanized nails. It is crucial to nail the cap at both ends, and is secured to the sheathing in such a way that it won't budge regardless of the weight of the sheathing and siding attached.