How Double Glazing Window Locks Repairs Has Changed The History Of Double Glazing Window Locks Repairs Double Glazing Window Locks Repairs

Double glazing window locks repairs are essential to keep your home secure. Insecure handles or hinges could let draughts in to your home and expose your windows to burglars.

You can, however, fix rigid uPVC handles or locks without replacing the door or window. Cooling or oiling the mechanisms can help to resolve any issues.

Broken Glass

Window locks made of double glazing can wear out over time. As this happens, the handles can become difficult to open or even close. This can result in issues with ventilation in the house and also pose a security risk. It's important that you get the window repaired as soon as you can.

Double glazed windows consist of two or three glass panes with a gas in between to provide insulation, and an air seal to keep the panes together. If you notice condensation between the glass panes, it is likely that one of the seals needs to be replaced. It is usually necessary to replace just the one window pane and is a lot less expensive than replacing the entire window.

Condensation and cloudiness are usually the result of a broken seal on windows with double glazing. This can result from a range of causes, including air leaks or excess humidity in the home. It is important to call a double glazing specialist to fix the gas and seal your double-glazed window when you spot this issue.

It is possible to replace a single pane of double glazing glass, however, it is not recommended to do it without the assistance of an expert. It is important to have the right tools and knowledge in order to perform the task safely. You could damage the window frame or even your health if you attempt to do it yourself.

If a double-glazed window gets stuck, a lot of people make use of a crowbar in an attempt to open it. But, it usually results in the frame getting damaged and swollen. A specialist in window repair can remove the handle from the window and allow it to open without causing more damage. They can also convert discontinued window mechanisms into more modern mechanisms.

Window hinges can become stiff and difficult to open with time particularly if they're located in an area that is noisy. It is essential to regularly lubricate your window hinges with silicone spray. It's also important to avoid shutting the window too tightly or closing it with the handles as this can harm the hinges as well as the lock mechanism.

Broken Sash

This is a frequent issue for older double glazing windows. It is sometimes difficult to lock and open a window when the upper sash is out of its pocket. This is usually because the pins are not engaged or a balance shoe has been disconnected. Every sash is unique and therefore it is essential to know how yours is set up before trying to fix the issue.

The best way to solve this is to remove the sash and clean it thoroughly. This will reveal if it's still a good fit. If not, you'll need to add sash stops to ensure it stays in place. You can purchase them from many hardware stores or online. Once you've cleaned the sash you can put in the beads that separate and lubricate the pulley axles with a Teflon or silicone spray. Label the weights prior to taking them off them so that you can put them back in them correctly.

Another issue that is common is a damaged handle. Window handles can be difficult to detect however there are a few indicators that tell you if the handle you have is broken. If the handle is spongy or stiff, or doesn't feel solid, it's likely broken.

It could be due to a absence of use or the handle may have been damaged or broken. In some cases, the handle might be damaged inside and cannot be replaced however it's still worth attempting to fix it immediately you notice the problem.

It may be necessary to take off the hinges that attach the window sash to the frame in order to take it off. It's not an easy task, so you'll require someone to assist you in holding the sash steady. After removing the hinges it's necessary to clean them and the areas around them. Reattaching the hinges a good idea. You can test the handle and see if it works properly. If not, then you ought to think about replacing it. This will make your window as secure as is possible.

Broken Handle

It is not common for the window handle to break or deteriorate over time. It is crucial to repair any damaged handles as quickly as you can to avoid security and functional issues.

Fortunately, it's easy to replace windows handles. In contrast to a sash, which requires multiple bolts to secure, the window handle is secured by two screws, making it a simple DIY task for anyone with a bit of knowledge. Once the new handle is in place, it's important to test it to make sure the mechanisms are operating properly. This should include locking the handle and checking for any gaps that could allow drafts in or potential thieves to gain access to your home.

The most common reason for a broken window handle is that it's simply damaged from use over and over again. However the force or stress that is applied to it can result in broken handles. If you force a window to open, it could cause additional stress on the handle. This increases the risk of damage.

Other reasons for a damaged handle are poor maintenance, ageing or design issues. Inadequate cleaning and lubrication may cause the handle to wear down prematurely, and this is often the result of dirt or debris that builds up over time. The handle could also be weakened due to improper installation or alignment issues.

If window repair Caterham mentioned don't work and the tasker isn't able to solve the issue, the Tasker may require access to and remove the lock mechanism itself. This could mean removing the frame, or 'breaking out' the window frame and plastic bead (to give more wriggle room). A new lock can then be fitted which is a similar profile to your existing uPVC handle. The new handle can be put back on and the procedure is complete. Tasker will provide you with a quote on the cost of repair if this is the situation.

Faulty Lock

When window locks become damaged, it's vital to repair the issue immediately. A damaged window could cause drafts, weaken security barriers and expose your home to burglary. Window lock repairs are typically minor, but it is better to consult an expert before the issue gets worse and cost you more money.

UPVC window locks come in two different versions: espagnolette handles and the cockspur handles. The first uses a central rod to operate mushroom shaped locking cams that lock into window frame keepers. The cams of the lock are activated by a handle connected to spindles. The latch of the lock snaps into the mortise catches on the window frame.

Both kinds of UPVC window locks are prone to deterioration, particularly in older homes. The damage can occur when the sash is warped or misaligned, and it might even fall off. In these cases, the lock needs to be reinstalled to prevent the possibility of draughts and decrease in energy efficiency. Tasker can replace the faulty lock for you, leaving you with peace of mind that your windows are safe from intruders.


The first thing a Tasker can do to fix your double-glazing window lock is to examine it and determine the issue. Once they have all the data they need, they will make their tools ready and arrive at your house. They will usually bring along a Phillips head screwdriver, needle nose pliers, wood glue and fine-grit paper.

Tasker has to loosen screws that secure both parts of the lock on the window frame if the sash is not aligned correctly. The Tasker will then remove the latch and then fill the mounting holes (if necessary) with wood putty, after which they sand the area to make it as flush as the rest.

If the lock is rusted they'll clean it with wire brush or oil and lubricate it with grease to ensure it's working smoothly. They'll also examine the condition of the latch and then reinstall it.