Where Will Saab Key Fob Programming Be 1 Year From This Year? Saab 93 Key Fob Replacement

Saab 93 key fobs can be costly to replace. However the procedure is easy.

You'll require a flathead screwdriver and some patience. Insert the screwdriver into the middle of the case and then slowly open it.

Having spare fobs and keys is an excellent idea. You will avoid being stuck and having to pay towing fees.

How do I replace the battery?

All car key fobs that allow you to lock and unlock your car remotely have a battery inside that will eventually fail. In a few simple steps, owners can easily replace the battery on their key fob. The key fob features two plastic flaps on the one side that you need to open to remove the old battery and then install the new one. The replacement battery is the standard CR1632 coin cells, and the process to install it is straightforward.

After you have removed the emergency key, apply the flathead screwdriver to a small piece of wood to break the case. Be careful not to push it too hard, since the electronic components inside the case are delicate and may be damaged when you press too hard.

Saab produced some stunning cars, and many of them are still in use around the globe today. One of the big problems with these cars, however, is their ignition keys. The buttons may become stuck or even fall off with time. It can be expensive for a Saab owner to purchase an additional key from the dealer when they lose their one functioning one. They will need to replace the computer module and then program the new key to convince the car that you're not attempting to steal it. You can save money by replacing the case.

How do you remove the Manual Key

Batteries are in all key fobs used in the process of lock and unlock vehicles. They have a limited lifespan. If you're like many you'll lose yours at some point. Fortunately you can replace the battery that controls your key fob is very easy. The only tricky part of the procedure is taking out the old battery from the case. However, with a little patience and a flathead screwdriver you can accomplish it.

After you've installed the new battery, it's now time to reassemble the entire thing. You'll need a flathead to open the replacement case of the key fob. Insert the screwdriver into the slot that is in the middle. Gently work the case until it splits in two and you can take it off of the key fob.

If the previous keyfob lost its connection to your safety system of your car, you may need to reset the new one. You can do this by following the manual learning process to add a new fob for your 2010 Saab 9-5. This method DOES NOT cause the loss of previously learned keys. You can still use the same FOBs that you have, if you have to re-program them. To begin this process the FOB to be programmed must have a mechanical key cut to match that of the vehicle.

How to Resolve the Case

If you're replacing the battery or the manual key it's recommended to replace the case as well. The cases can get worn out quickly, especially after long-term use. Removing the case from your SAAB 9-3 can be an easy task and you don't need any special tools to do it.

The first step in changing the case is to remove the manual key from the fob. saab 900 key is done by pressing the blue SAAB logo on the fob before pulling the manual key out. It may be necessary to use a bit of force to remove the manual key from the fob.

Once you have removed the manual key from the case, you are able to begin to remove the electronic components. To accomplish this, you'll need an inexpensive flathead screwdriver. Be gentle with your screwdriver, so that you don't cause damage to any electronic device. Once you've removed all electronics, you can begin working on removing the battery. Once you've replaced the battery, you can put everything back together in a new case. You can buy cases online at a very low price.

How do you program the new key?

All key fobs that permit you to lock and unlock your car remotely have batteries, however they are only able to last for a short time. It is important to be aware of that and change the batteries on your key fob every three-4 years. It is a straightforward process which you can perform at home. All you need is a small flathead screwdriver as well as some patience.

First, take off the manual key. Press the blue SAAB logo and pull the emergency key from the key fob. It may take some force but the key should be released easily. Once you are able to open the key fob it is possible to remove the battery that was in it by gently pushing the screwdriver into the slot in the middle of the case. This will split the case, making it easier to access the electronic components.

It is now time to program the key. You can do this by following the steps outlined in this video from YouTube user Cyclone Cyd. This is a fantastic video channel that gives instructions on how to carry out simple maintenance and repair jobs on vehicles.


Key fobs can be an ideal place to store an additional car key in the event that you lose or break your original. You can purchase a replacement keyfob through the internet or from local locksmiths like United Locksmith. The price is less than at a dealership, which will charge you for the key and programming it to the car.