15 Things You Didn't Know About Locked Keys In Car How To Open Locked Keys in Car? Here's How to Open Your Car Without Damage

Don't panic if you've locked your keys inside your vehicle. There are a variety of tricks you can try before calling a locksmith or a roadside assistance service.

You could, for instance using a shoelace that has an elastic slip knot to raise the post lock. You can also untwist a wire coathanger and shape it into hook. You can also use an inflatable wedge or a door wedge.

Pump Wedge

Call a professional if you are stuck in your car and DIY methods like shoestrings, wedges or wire hooks don't work. A locksmith or repo service provider might have lockout tools that can allow you to unlock your car without damaging it.

If they do, make sure you use them in a proper manner. Know where to insert the wedge tool. Many people put the wedge in the upper corner of the door, where it is most vulnerable to being damaged. This is a mistake since you risk damaging the wires and weather stripping inside the doors. The wedge should be placed in the area where you can see the largest gap and also where the greatest leverage is.

The Pump Wedge is a high-quality inflatable wedge that is constructed from heavy duty, non-marring vinyl material. It slides between the vehicle door and the door frame and is then inflated to create a separation which allows you to insert other tools like a long reach tool rod for opening your car. It also has a hook on one end, which you can shape to grab the latch on the door handle.

A more economical alternative is a pair of wooden door stops. They can be put at the back of the car door to make the gap wide enough for a rod. You could also make use of a slim-Jim which is a thin metal strip that is bent into a hook, and then used to secure the lock. This method requires practice however, as you need to be careful not to tear the door's weather stripping.

A shoelace is another good alternative, but it's only with older cars that don't have a push button to unlock the mechanism. You can tie a knot in the middle, and then move the lace upwards and downwards along the door seam until you find the latch. Then, you can move the lace until it catches the lock, then tighten the slip knot, and pull it upwards. This method is more difficult and could scratch the paint on the door or dent the trim if not done with care.

Inflatable Wedge

If you have a wedge-shaped inflatable car door opener, you will be able to quickly unlock your vehicle without the necessity of prying or slim jim tools. These wedges for cars can be placed between the window and the frame of the vehicle, and when inflated they create a space sufficient to accommodate tools with a long reach, such as a slim jim or a button grabber. This method is less dangerous than using tools for prying and can be used when you do not have an screwdriver.

A coat hanger that is wired into a hook is another option to unlock the car without damaging its interior or exterior. It can be used to grab the lock button, and it might work better than a flat screwdriver since it is less likely to cause damage to the car's paint. However, you should still inspect all the doors to make sure there isn't another way to gain entry.

You could also try using a plastic bag that has been twisted into a v-shaped or noose-like shape, but you'll need to be cautious not to tear it as this could make the situation more difficult. This method is particularly useful if you can't find the lock button. It might not be as reliable as using an iron wedge or coat hanger however, it can help when you're in an awkward situation.

The best tip we can give you about being locked out of your car is to stay in a calm state and put safety first. There are many ways to solve this problem. If you've read this article, you will be prepared for any situation that could arise. unlocking car door service can unlock your vehicle by following our steps. This will help prevent unnecessary stress and damage. And of course, if you can, always be sure to bring your keys with you when you leave your vehicle.

Shoelace

Getting locked out of your car is one of those "oh crap" moments that can make your day miserable. It's best to have a few tools that you can use to unlock your car without breaking any windows. Certain of these items are easily accessible and will help you save money on locksmiths, or the time required to get roadside assistance.

A shoelace, or even twine, is a great tool for unlocking a car. It's simple to use and will work on a wide range of vehicles. This method only works on cars that have post locks. They can be placed vertically on the sill of the window and easily accessible from outside the car. To get the job done, use a shoelace to create a slip knot, then move it into the crack between the door and window frame. Once the slip knot is set, pull both ends of the string upwards to loosen the lock.

This method is more efficient when applied to older vehicles, and might not work with newer models with a hooked interior lock. If you have a screwdriver handy to use, you can use it to unlock the door more forcefully. Another option is to snag an object from a nearby object, like a doorframe, or a piece of wood, and then stick it inside the window frame to make an opening for the rod you'll use to push the interior lock button.

While the above methods are relatively safe for most drivers, it's best to get help if possible. This will help prevent further damage to your vehicle, and it will also reduce the chance of an accident caused by the stress of the situation. If you don't have a mobile phone or cannot call for help it is essential to always let trusted family members and friends know where your vehicle is parked. In addition having a spare set of keys could be kept in a easily accessible place on the vehicle, so you can retrieve them if required.

Wire Hanger

It is a frustrating situation to put your keys in your car. However, the key is to remain calm and think logically about the options to get them back. You will not make the situation worse if you do not panic.

One of the most effective options is to use a modified wire coat hanger to get back in your vehicle. You'll have to unravel the coat hanger until it has a straight end and a hook, which you can use to manipulate the lock rod inside your door. When you are able to reach the rod, you will be able pull it up to open the door.


You could also use rods, or a metal piece from your car. It is important that you make sure that you don't cause any damage to your vehicle during the process, and it is best if you can do so without having to take the car apart. This method will work better on older cars than on modern ones. However it can be utilized on models with unique outer door handles.

You can perform the same trick with the use of a shoestring tied into the slip knot. This can be done on the postlock, but it is more difficult to maneuver as you will rely on the tension of the string to nab it. The best way to do this is by threading the shoestring through a tiny hole that you can create in the weatherstripping of your vehicle's door. After the shoestring has passed through the weatherstripping, you are able to pull it tight to form an elongated loop that snaps around the lock. If you are lucky, the lock will be at the right spot.