Beware Of This Common Mistake When It Comes To Your Window Handles Upvc Window Handles Replacement

It's fairly simple to replace your window handle. You'll only require a few tools and a few steps. To ensure the success of your replacement, you must first identify the handle type and measure the spindle.

There are two major kinds of upvc handles: Espag and Cockspur handles. Espag handles are equipped with a 7mm square spindle which engages the locking mechanism on the frame.

Espag handles

Espag handles are a common choice for upvc and timber frames. They are designed to be used with multipoint locking systems like espagnolette. The handle is 7mm square shaft that protrudes from the back and is then inserted into the gearbox for a multipoint locking system within the window. They are also available in a variety of different spindle lengths. This is due to the fact that each kind of window handle is connected to a different multipoint locking system that has distinct design and layout of the gearbox.

The standard specifications for an espag window handle include a push button to lock the window in the closed position. They also come with keys locking features and, if required, a fire escape non-locking feature. Some even meet Secure by Design standards, which can provide you with additional assurance. They are typically attached to the sash with two screws spaced 43mm apart.

There are several variations of the handle for espag. The most notable is the in-line design or cranked. In-line handles can be rotated left and right. Cranked handles only work when the window is moving in the same direction. They can be installed either clockwise or counter-clockwise. The handles can be attached to the window in any direction, but they must point in the same direction as the old cockspur handles.


When choosing a replacement window handle, it is important to take your time and determine the spindle's measurement. The spindle is a metallic bar that extends out from the back of the handle. It can range in length from 10mm to 55mm. It is the length that is exposed when the handle is in its intact state. This is the length that you will have to match when buying the replacement handle, since the spindle is the one that drives the lock inside the window.

Certain manufacturers offer a magnetic espag handle that eliminates the requirement to cut spindles in order to fit. This can simplify the fitting process because it is quicker and simpler to remove the old handle and put in a new one. It is still best to take the time to check the spindle length because this will ensure the smooth operation of the handle.

Cockspur handles

Cockspur handles are found on older uPVC and aluminium windows. they don't come with an internal locking mechanism but are considered safe because the handle's nose is closed to a wedge-shaped block that is built inside the frame of the window (this kind of handle is not to be confused with timber windows where there is a catch instead). Cockspur handles are popular and come in a variety of styles to suit all types of doors.

They are an economical and easy option. They can also be key-locked to meet insurance requirements. There is also a choice of handle nose sizes to suit different frames. A lockable version, which provides a level of security and has been approved by Secured by Design, is also available.

These types of handles are attached to the sash of a casement or tilt and turn windows using a spindle which runs through the baseplate of the handle. Repair My Windows And Doors is operated by the lever that is located on either side of the handle and the spindle of the handle engages with the wedge striker that is fitted to the frame of the window to secure it in place. Cockspur handle kits are generally offered with left and right hand versions, and an array of nose heights that will fit the majority of frames.

The right size wedge block is essential to an effective installation. It is a small piece of plastic that is in the shape of a ramp. You can replace with a one slightly larger to ensure the handle will close properly across the gap to prevent draughts. There is a certain standardization of fixing positions for these handles. They are usually 38mm and 58mm, so you will be able to locate the right replacement without too much difficulty.

Another thing to think about when selecting the new set of cockspur handles is the length of the spindle. This is the distance between the baseplate of the handle and the point where the shaft extends through the sash and into the frame. It is crucial to set this correctly to ensure that the handles function smoothly.

Tilt and Turn Handles

Designed specifically for tilt and turn windows These handles are available in locking, non-locking, or a tilt-safe option. These heavyweight handles have a firm grip, and the detents are placed at 90 degrees. They are available in a choice of finishes, including black, white chrome, brushed satin and chrome. Fits Timber or PVCu tilt-and-turn windows.

These handles can be used to replace the cockspurs made of upvc on older windows, but without a lock. These handles are not identical to espag upvc handles, because they aren't locked and function in a different manner.

They have a "turn before tilt" mechanism which allows windows to be opened inwards and then dropped down into a hopper or ventilation style position to let fresh air in. This kind of handle, also known as DK or dry keep window handle, is often employed in older double glazed properties.

When replacing a tilt-and turn window handle, there are several points to be aware of. Firstly you need to ensure that the new handle is suitable for your windows, this includes checking the spindle's length. The length of the spindle is the length of the steel rod that extends from the handle into the locking mechanism. The longer the spindle more secure, the safer it will be.

Handles are usually fixed to the window frame or base by the screw that is located above or beneath it based on how the window is constructed. You can use a screwdriver take these screws out and then remove the handle. Before you do this though it is advisable to place the handle in its open position as this will make it easier for you to reach both screw holes.

Once the handle has been removed you will be able to see two screws that must be removed which will then reveal some decorative screw caps. They can be removed using a flat-head screwdriver and then the handles can be removed. Once the handles have been moved to the windows, you can put them back in place by replacing the cap of the screw.

Determine the length of the spindle.

The length of the spindle on the window handle is crucial because it determines how the handle will open and close. Different types of handles have varying spindle lengths, and it's important to measure the length of your previous handle prior to buying a replacement. This will ensure your new handle will fit in the window in the right way, and will be simple to open or close.

If you're looking to replace your handles or enhance the appearance of your uPVC window, the handle style will have a significant impact on the way the window opens and closes. There are numerous types of handles, including inline espagnolette, cranked and key locking. There are also tilt-turn handles that are designed to be used with a tilt-turn uPVC window that can open both ways.

To replace the window handle, locate the screw caps that hold it in the position. These are usually located above or below the window handle and can be removed using the screwdriver. After the screws have been removed, you can then take the handle off the window frame.

The handle can be removed from the window frame and replaced with a new one. Be sure that the new handle is placed in the same spot as the handle that was previously used and that the spindle aligns perfectly with the lock mechanism. After the new handle has been installed, it's the time to fix the handle by installing the screws. You can then put the screw caps back in when they're missing.

If your uPVC windows handles break it could be necessary to replace them. The handle may break due to a powerful force or the female portion that holds the spindle has deteriorated. This can be caused by someone in your household forcing the handle when it's locked.

To replace your uPVC handle, you should choose a high-quality one that will last a long time. You will save money in the end. In addition it will give your house an appealing and modern look.