How Do You Know If You're In The Right Position To Go After Kia Picanto Key Fob Replacement How to Replace a Kia Sportage Replacement Key

For a variety of Kia models, the key contains a built-in keyless entry system. The key can be compared to the remote control and can be changed by a new one purchased from a Kia dealer or a locksmith.

Key fobs might stop working for several reasons, including an empty coin battery, worn buttons, water damage, signal interference and a damaged receiver module. Here are some helpful tips on how to get your Kia Sportage replacement key to function again.

How to replace the remote key or smartkey?

If your Kia is equipped with an intelligent key, remote key push-to-start key, or a standard non-transponder key made of metal the battery in these keys will eventually require replacing. This is particularly relevant if your car displays a message telling that the remote or smart key has a low battery.

This is a relatively easy process. In order to replace the battery in the key fob remove the mechanical key from the slit on the back of the key fob. Next, kia key programming . Inside the key fob will be the small screw that holds the battery in its place. Take out the old battery by unwinding the screw with the help of a small screwdriver. Then insert the new one and close the hole in the key fob.

When the key fob is equipped with an updated battery and you've tested it, press the locks and unlock buttons. It's good in case the doors lock and unlock as expected. You can now utilize the hands-free lock/unlock feature on your Kia whenever your fingers get chilly or you need to go on errands around Brandon.

Note: Some key fobs could need to be programmed (transponder chips or smart keys). This requires a programing machine which is available to the locksmith in the automotive or dealer. Other keys (non transponder keys made of metal), do not need programming. If you're looking to reprogramme your key, you'll need to record the key code number on the tag for the key code.

How do you replace the battery?

If the Kia key fob doesn't respond to pressing the lock/unlock button, it is most likely that the battery is low. A battery that is not functioning properly could cause other problems like the check engine light turning on or the engine not cranking. Fortunately replacing the battery on the key fob is a relatively simple DIY project that requires only some basic tools.

Before you begin the process, make sure that your vehicle is off and all doors are closed. Find the small metal or plastic piece near the bottom of the key fob. Then, jiggle it until the metal key falls out. The key can be put into the driver door handle to unlock your car.


To replace the key fob's battery, remove the cover at the rear and use a pry bar tool to remove the latch holding the black negative battery cable. Remove the old battery and align the new one in a way that the "+" positive side is facing you, while the "-" negative side is facing towards the fob's metal electrical contacts. Avoid using too much force when pushing the new CR2032 into position to avoid damaging or breaking the metal contacts.

After installing the new battery after which you turn the key fob off and on in the ignition until the door locks up. Then you can test your Kia key fob to see whether it's functioning properly again.

How to replace the smart key

Depending on the model of your Kia Sportage, you may have an ordinary key fob or a smart key. The smart key has an embedded mechanical key blade while the standard keyfob does not. Both key fobs have batteries that eventually require changing. Fortunately, it's an easy process that only takes about two minutes.

Be sure to turn off your Kia and stand on a flat well-lit and well-lit area before you begin. Keep in mind that the fob is made up of small parts that can be thrown off if you're not careful.

The first step is to locate the small release button that is located on the back of the lower part of the fob. This will be either a circular button or a rectangular slot. When you press it mechanical key blade, it will pop out and you can then open the key fob.

Once you have the key fob opened and you are able to take off the old battery and replace it. The new battery should be a CR-2032, and can be purchased online or at a local auto parts store. When you're done, the key fob should be able to lock the vehicle, unlock it, and then start your vehicle, even if it isn't running.

How to replace a mechanical key

The Kia key fob is an amazing feature that lets us lock and unlock our vehicle with the press of the button. As with all devices like a key fob, the Kia can have issues at times. There are solutions to address these issues and keep your key fobs functioning for a long time.

One of the most common problems is a low or dead battery. This can cause your fob to stop working or work intermittently. If this happens try replacing the battery with a fresh new one.

If this does not solve the issue, try using an ordinary screwdriver with a flat head to push the fob's plastic casing open. Be careful not to damage internal components or scratch the plastic. When the battery is open, carefully take off the battery that was removed and replace it with a brand new one.

Close and open the door using the mechanical key. (Every kia fob comes with an emergency mechanical key that fits into the slot). Test the key fob to confirm it's functioning properly. Contact a dealer or locksmith to solve the issue in the event that the key fob is not working. To avoid future lockouts, ensure you have an emergency key that will work in all of the trunk and door cylinders.