Repairs To Upvc Windows: What's The Only Thing Nobody Is Discussing Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will reduce repair costs as well as improve energy efficiency.


1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. It is important to take the time to ensure that you're doing everything you can to ensure that your windows are in good repair.

Single-pane windows are relatively easy to replace and typically fit into frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the old panes. In this case, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor and could be trampled under.

It's a good idea to cover the gap with tape after the glass is removed. This will stop water and drafts from entering your home until a professional is able to fix the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the gap is particularly large, you might be interested in an alarm door that comes with an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. However, with time, they can suffer from a variety of issues, including sliding. A sagging uPVC window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from getting worse.

window repair near me could aid in fixing a window that is sagging. To do this, you'll need to open the window to access the frame. Then, using the screwdriver, you'll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having repositioned your hinges. If you are happy with the size of the window, you can tighten screws to keep them in place.

If you cannot reposition the hinges, you may have to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to loosen. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are watertight and draught-proof.

uPVC handles could also loosen. This is often caused by screws that have loosened over time, but it can also be caused by the handle mechanism wearing out. It's relatively simple to fix a loose uPVC hand. First, you'll need to close the window and then perform an experiment to ensure that it fits. The corners of the sash must be aligned with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and then return the mechanism to its original the position it was in.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it's crucial to take action. The leaks of water from windows do not only lead to the degradation of your home's structure but also hamper your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by any DIYer who has the ability. Based on the severity of the issue the caulking used previously may need to be removed before a new layer can be applied. When it comes to uPVC repair, you should avoid over-caulking. This can make your window harder to clean and lower its energy efficiency.

Check that any drainage holes are free of debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious instances, you may need to replace the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed window, it is more likely that the issue is more with the seal than the frame. It is also possible to be repaired by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open, or if it blows open with an ease. They can be easily replaced by any competent DIYer and can usually be done within a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It is very easy to change the hinges on a window but it's much simpler if you have someone to help you hold the frame.

Make sure that the uPVC hinges are open and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue can be caused by opening the window incorrectly or due to a poor installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be happy to give you suggestions.

Regular lubrication of hinges is also essential. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the risk of a window sticking and prevent corrosion. It is recommended to do this at least once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges may also become disaligned as a result of wear, which can cause gaps where the sash and frame meet. This can be easily repaired by giving them good cleaning, but if they are beyond repair it might be necessary to have them aligned or replaced. Second, the interlock can be disaligned. It is located on the hinge's side, and may need to be cleaned. In certain instances it might be necessary to replace the hinges.

The next common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and will allow air to escape through these gaps. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures, and also lessen the possibility of draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. They can help block out cold air and keep your home warm and cozy!

With a bit of regular maintenance and repairs windows made of upvc will provide excellent insulation and security for your home. However, it is important to recognise that all windows have a lifespan and eventually, they will reach the point when it's more cost-effective to replace them rather than fix them. If you encounter any issues with your Upvc window it is recommended to speak with an expert as soon as possible.