Then You've Found Your Double Glazing Door Lock Repairs ... Now What? Double Glazing Door Lock Repairs

Has your uPVC window or door mechanism deteriorated? Maybe the handles on your uPVC windows and doors aren't aligned correctly or are difficult to use.

It's important that your double-glazed doors work smoothly, otherwise you will lose energy and increase the chances of burglary. Owen the Locksmith can repair your door lock for a reasonable price.

Snapped Key

When a key snaps off in a lock, it could be extremely annoying. It's also potentially a security risk since the door might not lock and leave you vulnerable to intruders. There are a few quick solutions you can use to fix the problem and make your door functional again.

The first step is to remain calm. If you panic you could end up pushing the broken key further into the lock.

Spray WD-40, or any other penetrating lubricant, into the lock. This will assist the broken piece to come out more easily. You can also use the screwdriver to break off any pieces stuck. If you have a part of the key that is stuck out then grab it using the help of a paperclip or any other thin metal object and pull it. Both methods work, but you must be careful not to push the broken key piece further into the keyway.

Some paperclips come with grooved edges which can be used as hook extractors. Jigsaw blades can also work well for this. If you don't happen to have any of these items then you can bend a hook with needle-nosed pliers. Additionally, a pair of tweezers is a good way to grip and pull out the remaining piece of the key that was broken.

If you are unable to get the broken piece of key out, try using a lock de-icer. It's available in many hardware stores and is used to freeze any moisture present in the lock.

If none of these methods seem to be helping, it might be time to call a locksmith. Fitlocks experts can quickly resolve issues with uPVC door mechanisms and locks that have snapped keys as well as broken handles. They can also reconfigure the double glazing door mechanisms so that they are easier to operate. You can request repairs to your double-glazing online or contact us to discuss your needs.


Broken Cylinder

A damaged cylinder can pose a serious security threat. It's fortunately a simple repair for an expert locksmith to complete. To repair the cylinder, locksmiths must tap it. They can do this using an hammer or another tool, but the best way is to make use of a long match or piece of wire. Then, place the match's end or wire close to the keyway. The locksmith can strike the lock to crack it open. This is more secure than using a hammer that could damage the lock.

The most common cause of cylinder head cracks is overheating. This can occur when the block and the cylinder head are made of different metals like cast-iron and aluminium. When the various metals heat up and cool down at different rates, it could create hotspots in the local area that expand faster than the rest of the cylinder head, leading to cracks.

Corrosion can be a cause of fractures in cylinders. If the cylinder head and the block of the cylinder are not properly maintained, this can cause corrosion or rust that could cause them to expand at a a higher rate than they should. This can lead to cracks in the future.

If your uPVC door or window lock is stiff or requires an enormous amount of pressure to turn, this can be caused by many things. A faulty locking mechanism, misalignment or a worn handle are common causes of this issue.

It is a quick and inexpensive fix that most double glazing owners can accomplish. A professional locksmith will typically be able to solve this issue within a matter of hours after arriving at your residence. They can replace the locking mechanisms, or replace the window handles, and also change the gearboxes, depending on your particular requirements. A skilled locksmith will always be able to inform you of the most cost-effective solution for your home. They can even recommend upgrades to 3 Star security TS007 euro cylinders that will provide an extra layer of protection against burglars. It's a small price to pay for the peace of mind that comes from knowing that your uPVC doors are secure.

Broken Handle

Window handle locks have intricate mechanisms that become less effective with time and use, so it's not a surprise that they sometimes break. If yours fails it may be difficult to determine the source of the problem and make sure you fix it properly.

Fixing your broken handle, whether it's the internal latch or locking mechanism will increase the security of your uPVC door and prevent draughts. Incorrectly repairing or replacing your handle can be expensive and can damage the door's frame and lock It is therefore worth taking the time to do it right.

With the window open, loosen the screw that secures the handle with the screwdriver. It should be located on the inside of the back plate, normally concealed by an aesthetically pleasing cover for the screw reasons. It is important to not be able to replace any internal parts of the handle like the plates and levers on either side. It is best to keep them in the same place so you can replace them when needed.

Then, with another screwdriver loosen the screw that connects the handle to the spindle on the back. Once the screw is loose, you can remove the handle and remove the broken spindle. Replace it with a brand new one, making sure that it's the same size as the previous one (you will typically find them on the internet or in hardware stores) and then securely screw it in the correct position. Do not overtighten the screw as this could harm the handle as well as the window frame.

Check that the new handle is installed, then close and test the handle. It should work smoothly, and you will be able open your window after a few times.

Don't forget to double-check that your uPVC window is shut correctly when you're using the handle. If they don't close properly, you could experience damp or draughts inside your home. It could also affect the energy efficiency of your home. A local window company, such as Core Sash Windows, will be capable of adjusting the hinges on your window frames so they can shut properly.

Broken Spindle

It is more common for the spindle to break than the handle. This is especially common with uPVC tilt-and-turn windows. These kinds of windows require a handle which is a lock mechanism that is located in the frame of the window. The handle is attached to a central rod which activates mushroom-shaped locking cams that secure the window frame keep. If the dead latch mechanism fails to open after the handle is turned, it is most likely the spindle is damaged. This could be a problem that is frustrating.

Luckily, there are ways to rectify this issue. A good locksmith can quickly and efficiently fix this problem. A professional locksmith will be able to disassemble the window's handle using a tool that removes the wheel from the area in which the spindle is. This can be done with no damage to the handle or window frame.

After removing the wheel the technician can examine the spindle and determine the cause of the break. This involves disassembling the spindle, and then examining every component, observing any wear or damage. This process is typically carried out in a clean, well-lit room by highly skilled technicians.

The next step is to clean the damaged spindle, this will remove any dirt or debris that could be hindering its normal operation. Following this, the spindle could be repaired or replaced. If the technician is replacing the spindle, the dowel can be used that is the same size to the original. Then, he will drill holes that are identical to both pieces. This will ensure that the new spindle is a precise fit with the handle.

If double glazing repairs is damaged and cannot be repaired it may need to be replaced entirely. Home centers sell generic replacements, but if your window design is unusual then you'll require contacting an expert in woodworking or cabinet making who can recreate the exact part. After the spindle is installed, it is connected to the handle. Place the screw holes on the handle to the screws already in the frame. Once the new handle is firmly in place, you'll be able to operate your uPVC window.