20 Things Only The Most Devoted Door Locks Aylesbury Fans Know Types of Door Locks for Patio Doors in Aylesbury

Sliding patio doors in aylesbury are a great method to increase the amount of light that enters your home. They are also easy to maintain and secure from burglars.

A customer contacted us to discuss installing a new lock on their front door. After a range of options were considered, they settled on a Yale night latch fitted and a set of new keys supplied.

Sash Locks

Sash locks are one of the most common mortice locks and they work by using a combination of latches and deadbolts. These locks are installed within the door's material and are operated with a key to unlock or lock them. These locks are suitable for both back and front doors since they are secure. Sash locks come in a variety of sizes that can be adapted to any door thickness. They can also be installed on UPVC and hardwood doors.

There are a variety of different kinds of sash locks available however the most well-known are the five lever sash lock and the three lever sash lock. The five-lever mortice sash lock is one of the most secure options available and it meets British Standards for thief-resistant locks. It also comes with an apex and striker that are available in a range of finishes that match the knobs or handles on your door. The three-lever lock may not be as secure, however it offers enough security for home use. It is also simple to customise, as it features fewer levers and can be used on all doors in the house.

Another type of sash lock is called the rim profile the sash lock. They are similar to a sash locks, however they are different in that they don't fit inside the door. Instead, they are attached to the exterior of the door and can be secured with keys from both sides. They are ideal for interior doors that require privacy like bedrooms and bathrooms.

A Sash lock is an excellent method to protect your home from intruders, and your children secure. They prevent the sash from opening too far and ensuring that your children cannot fall out of the window. They can be found in a variety of sizes, from 3 inches to 5 inches, and are a great addition to any window restoration project.

Sash window locks are simple to install and can be installed at home by anyone who is a D.I.Y enthusiast. To begin, you will require a ruler and pencil to mark the center location where you would like to place the lock. Once you've marked the central point it is time to remove the screws that held the sash. After removing the screws you should clean up any debris or paint that may have remained. Then, you can put in the new fastener.

Mortice Locks

A mortise lock is a relatively large mechanism that is able to fit into the interior of the door. These locks are usually found in older structures as well as newer homes that are more luxurious. You can still purchase a mortise-style lock in hardware stores. It is a very sturdy and secure option. It's perfect for securing areas that are prone to traffic, such as schools or hospitals.

It is not possible to utilize a mortise locking system with a standard knob handle because the bolt will only retract when a key is used. The bolt won't be able move until the knobs are turned, so it's crucial that you choose the right knob and handle that fits inside the lock case in a perfect. Refer to the lock diagram if you're unsure.

Mortice locks are usually constructed of strong materials that are able to withstand a lot of wear and tear. They are extremely hard to break even under extreme pressure. This makes them an ideal choice for doors in high-traffic areas that are likely to be subjected to many abuses, such as hospitals and schools.

Similar to rim locks mortise deadlocks come in several different styles and security levels. For instance there are three-lever mortice sashlocks, which are commonly used for doors that are internal like bedrooms and porches. But, they're not considered to be as secure as a mortice lock with five levers due to the fact that they have fewer levers, and thus present a greater risk for key duplicates.

If you're considering installing mortice locks on an exterior door, be sure to make sure that the lock you buy is British Standard approved. double glazing seal repairs will ensure that your door is secure enough to prevent burglars from entering your home or the theft of your valuables.


A mortise lock works by locking into a pocket cut into the inside of the door frame. The pocket is known as a mortise, and the lock is held with the help of a "lock case" that is attached to the frame using screws or nails. A hard collar is usually placed on the outside of the lock to prevent it from being removed with a pipe-wrench.

Cylinder locks

Cylinder locks are a good choice on uPVC as well as timber or composite doors. They are comprised of two components - the lock, which opens the door latch or dead bolt and the cylinder which controls it. The design allows both components to be swapped out if necessary. This is beneficial in the event that a component doesn't work correctly or you want to upgrade to a more secure cylinder.

The lock cylinder has a series of pin pairs inside it. It is the part of the lock that receives the keys. When the correct key is inserted into the lock cylinder the notches on it push the pins up to different levels. This allows them to rotate, and also open the doors. If you insert an incorrect key the notches will not align and the majority of pins will remain in their normal position.

There are a variety of types of cylinder lock available, from basic pin tumblers up to high-security versions that can resist multiple lock picking methods. The more pins a cylinder locks has, the more difficult it is to pick. A standard cylinder lock will usually contain six pins, while higher security models could contain as many as 13 pins. These pins are commonly called "security pins". Security pins come in a variety of varieties, such as spools with a narrow machined waist which is similar to the cotton spool. They could also be serrated pins, which have one or more narrow grooves.

A cylinder lock is easier to install than mortise locks because it does not require the frame of your door to be drilled. It's an excellent idea to have the frame of your door measured and fitted by an expert to ensure it is properly positioned. If your door isn't square, you'll need to choose an offset cylinder.

Cylinder locks are cheaper than smart locks and offer a good level of security. They are a great choice for homes that don't require as much protection or for those who are looking to secure their home quickly and easily. They are especially efficient if your door has a already been drilled for the lock.

Mullion Locks

A mullion is the center part of a double doorway. It divides it into two sections, allowing the other side to be used as an opening in one. It can be fixed, or removable. Mullions are available in metal, wood or plastic. They can be utilized with mortise and rim locks to exit the lock. They improve the security of double doors and provide more space for exits than rods that are vertical. They are also perfect for doors that see frequent use, such as doors that are rated for fire and hurricane.

During construction, a mullion is likely to be joined to the head of the frame and then fixed to the ground. However certain mullions are designed to be removed, making them a great choice for commercial situations where the position of the door can change frequently. For example when a business owner is planning to put an employee entrance at the back of their building, they could simply take the mullion off to allow deliveries and larger furniture to pass through the door.

The removal of bolts and screws is required for traditional mullions. These fittings are inserted into the floor or top of the frame of the door. This is a tedious and time-consuming process that often requires two people. In time, repeated removals could cause the fittings and mullions loosen. If the mullions do not remain installed, large machinery, carts and gurneys cannot easily pass through the opening.

To solve this issue, a keyed removable mullion is now available that allows for quick and simple removal of a mullion's top bracket with a simple operation of the rim cylinder when a wide unobstructed opening is required. The PDQ 9300 series removable mullions were designed to be used with the Rim Exit Devices 6300/6400 series on pairs of doors. They also enable the top bracket of the mullion to be removed from the upwardly extending protrusions 42 and 43 on the bottom fitting 20 which is permanently attached to the floor 14. This releases the latch and the mullion is able to be removed temporarily. Once the mullion is installed the latch is automatically engaged by the rim cylinder, and the locking mechanism is activated.