Who Is Responsible For An Double Glazing Lock Repairs Budget? 12 Ways To Spend Your Money Double Glazing Lock Repairs

The best locks for your windows and doors can stop burglars from getting into your home. They don't usually like to break glass or try to squeeze through windows.

Certain double glazing owners however, have encountered issues with their door or window lock after the installation. Luckily, these problems are usually fixable and don't require to pay for new double glazing.

Broken or faulty locks

A locksmith can fix your uPVC window lock or door lock if damaged or broken. They can repair hinges, striker plates and locks for your double glazing. They can also move the cylinder around to fix any misalignment problems that may be causing your handle to not operate correctly.

If the key fits inside the lock but doesn't turn or is difficult to insert then the mechanism may be seized up. This could be due to dirt or grime accumulating in the mechanism. If this is the case it is possible for the lock to be cleaned and lubricated. It is crucial to make use of a dry lubricant like graphite or teflon instead of oil which attracts dirt and stick to the interior of the mechanism. After lubricating the lock, you must insert the key and try to turn it. The lubricant should work its way through the mechanism, and the lock should be able turn without difficulty.

Screws that are loose within the lock mechanism can be another reason for a broken lock. They can loosen and fall out or break completely and stop the lock from working properly. A screwdriver is a tool to tighten these screws however, care must be taken not to tighten them too much, as this can damage the internal components.

A broken lock can be dangerous for you and your family members especially if you have young children. It can be easy for them to unlock the door without knowing and allow them access to your home. If you're worried that this might occur, a professional locksmith can assist you to secure the double glazing doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and broken mechanisms on uPVC windows and doors. We can also reconfigure your uPVC or double glazing locking system to meet your specific requirements, meaning that in most cases, replacement doors and windows are not necessary.

Handles that are broken or damaged

Many double-glazed windows have a multi-point lock as a part of the overall security package. This is an excellent option for those who are concerned about potential thieves who may try for ways to gain access to your home. Ask your locksmith for antilift locks. They can be put in as an addition to the existing locks and can aid in keeping your windows closed.

It's not uncommon for the handles to be damaged or fail. They are the first component of your window that could be pushed open by criminals intent on breaking into. The good news is, this is one of easiest parts to repair.

Modern uPVC handles as well as aluminium handles come with a multi-point locking mechanism known as Espagnolette, which is designed to resist forced entry. This upgrade to security is typically offered as an optional extra on new uPVC window installation. Older style uPVC and aluminum handles can be upgraded to shoot bolt locking systems, again as an optional option on double-glazed window installations.

If a handle is defective, it is essential to get the handle repaired as soon as is possible. Faulty handles can prevent the window from closing properly and allow drafts in. It could also be a weak point that opportunistic burglars could exploit, therefore putting your family and belongings at risk of being stolen.

The process of fixing the damaged mechanism begins with opening the window frame and removing the damaged handle. The gearbox is then accessed to determine the kind of gearbox that is used to open the handle. This allows to replace the handle that matches the profile and the internal window frame mechanisms.

After the mechanism is replaced the handle can be reattached using the original screws. However, we recommend replacing them with more long screws since they provide the most secure fit. The final step is to apply a layer of clear sealant to shield the handle from further corrosion. After that the window will be fully operational again, and at less than the cost of replacing the entire window.

Hinges that are broken or faulty

If your windows do not close properly, you could experience draughts, a weakening of your home's security barrier, and an increased chance of damp or water damage. Window hinges that break or fail to function properly are a common problem and can be easily repaired.

If you have a uPVC window that won't open or close, it's likely your hinges are broken or damaged and need to be replaced. While a lot of window companies require that you purchase a new window unit to solve this issue We're able to repair the damaged hinges and save you money.

Window hinges can often break from repeated use or they could be weakened due to corrosion over time. If you have a broken window hinge, it is crucial to take the necessary precautions to avoid further damage. This means not causing the window to close or open.

You can locate the appropriate parts for your hinge by identifying its type. Maco, Mila and Roto are all manufacturers of window hinges. It's best to consult a professional in this case to ensure that you don't make the mistake of purchasing parts that aren't compatible with your current hardware and cause further damage.

A faulty hinge is a major problem for uPVC windows and doors. They can be an important source of noise and can also permit water to get into your windows.

Verify whether the pin barrels on both hinge halves are aligned. If it isn't, tap the headpin with a hammer in order to create a slight bend in hinge barrel. This will help to keep the pin in place. Ask a second person to hold the door as you remove the hinges and hinges from both the doorjamb and the door. Replace the hinges with ones that are the same size and then attach the screws using glue. When the glue is drying, put a secure hold on the hinges with clamps or weights.

After you have fixed your hinges, you can install the door again. You can also reattach the handle. It is recommended to replace the screws using the same length of dowels as the screw that was originally used so that they are in line with each one.

Broken or faulty glass

While uPVC windows do an excellent job of keeping the cold out and the heat in, they are susceptible to becoming damaged over time. This could include cracked or damaged glass and faulty locks. This is an issue that could be extremely costly should it be left unattended. This can also detract from the appearance of your home and can cause a loss of insulation. It is crucial to repair any damage promptly.

You can repair your cracked glass by yourself if your have the proper tools and techniques. First, make sure the area around the glass is free of debris so that any shards don't harm anyone and aren't a trip hazard. Next, remove any broken pieces and dispose of them properly. Then, apply masking tape to the entire area to keep pieces of glass from scattering and sticking to your skin when you move them. If you're dealing with a double-pane glass, it's a good idea to prepare the glass before gluing it back in place to ensure that you'll have enough space to complete the task.


Use a clean, dry cloth to wipe down the surface of the broken glass and the frame prior to applying the glue. Follow the directions for application and curing which may differ from one product to the next. Depending on the direction of the crack, you may need to clamp the glass during curing. double glazing repairs can be done using lightweight clamps that are designed to hold delicate materials.

When the adhesive has completely cure, carefully install the glass in the window frame, making sure it's flush with the edges of the frame and that there are no gaps between the glass and the window sash. Avoid bending the glass as you install it again because this could weaken the seal. This can lead to condensation or water infiltration.

If you have a glass window that's completely shattered or has larger cracks, consult a professional glazier like O'Brien(r) to organise the replacement. Leaving broken glass unattended can cause danger to pets and children and is why it's important to act fast.