11 "Faux Pas" You're Actually Able To Do With Your Nissan Qashqai Key Fob Reasons Why Your Nissan Qashqai Key Fob Won't Work

The Qashqai's bigger dimensions give it an SUV-like feel. Its 19-inch alloy wheels in Ti and STL models can also be firm. The front tyres may lose grip on rough surfaces, and its CVT may occasionally exhibit wrist-flexing torque steer.

It is usually due to an unresponsive battery that can be replaced in just a few minutes. Make sure the replacement battery is of the same voltage, size and specifications.

Water Damage

One of the most common reasons that a Nissan key fob displays the "key ID is incorrect" message is due to water damage. The key fob is fitted with rubber seals that shield the electronic chip inside, however prolonged exposure to moisture could cause it to cease functioning properly. This is typically the situation when you drop your key fob into the ocean or in a swimming pool, but it can happen when it's wet due to soapy hands or rain.

If your key fob has been exposed to water for a lengthy duration, it might have to be cleaned with isopropyl alcohol or electronic cleaner. Alternatively, it might require taking to an expert to repair or replace it.

If your key fob needs to be replaced, it is an easy procedure. First, ensure that you have a multipack of the correct battery (CR2032 3V). Unlock the front and rear cases with a flathead screwdriver. Remove the metal clips, remove the old battery and then replace it. After reassembling your fob, put the mechanical key back in place and verify that it works as expected. If it does not then you'll need to take it to your local Nissan dealer or an experienced auto locksmith to repair the chip on the key. The chip is typically not damaged by water so it isn't too costly.

Dead Coin Battery

Another reason why the reason your Nissan Qashqai key fob may not function is that the battery for the coin is dead. These batteries usually last 3-5 years, but they are susceptible to becoming depleted in time, particularly if the fob is frequently dropped. You could replace the battery but be sure to use the same voltage and the same size as the previous. If you install a new battery, it could cause the key to be assigned a wrong key ID. This could prevent it from being paired with your vehicle.

The most efficient method to change the battery of a coin in a Nissan Qashqai Key Fob is to open it with a small flat-head screwdriver. Push in the screwdriver in a small notch on the bottom of the fob and turn it around gently to separate the two halves of the key fob. Remove the old CR2025 battery and replace it with a brand new one, observing the position of the old one in the fob.

Before you put the new battery in place ensure that there is no dirt or water damage on the terminals. If so clean the terminals using small amounts of isopropyl alcohol. Make sure that the pole cables are connected correctly. They should be connected both the positive and negative poles of your battery.

Diagnostics of a fault

If your Nissan Qashqai's keys fob stops working after exposure to clean water from the tap or rain it could be a sign there's a problem with the internal chip. You'll require a new fob if you can't solve the issue by changing the battery. If the key fob didn't work after dropping it, it is likely that the chip inside was damaged. It is possible to get the key fob back to work once again if it is removed and clean the chip with paper towel and isopropyl alcohol before putting it back in.

Key ID Incorrect is a typical error that you can see on the dashboard of your car. The vehicle is unable recognize the key fob which is why it won't allow the car to start. This can happen in numerous ways, including water damage, problems undetectable in the circuitry of the key fob or RFID interference.

If the 12 volt battery in your key fob is inactive or is not supplying enough electric power it will cease to function. This can affect the remote keyless system as well as central locking in your Nissan Qashqai, as well as making it impossible to start the engine using the key fob (if equipped with Intelligent Key). If you're unable lock or unlock the door by hand it is recommended to check the batteries on your key fob to make sure they are in good shape. You may also try reinserting the battery to reset the transmitter.

Reprogramming


If the key fob was not submerged into saltwater it should be able to be restored to its original state by a simple wash of clean water. You can also try cleaning the electronic chip with isopropyl alcohol or an electronic cleaner. If nissan car key replacement of these works it could be time to replace the entire key fob with a new one.

If your Nissan Intelligent Key is still not working, there could be a problem with the connection between it and the car. Start by turning the ignition key without activating the vehicle. Keep doing this until you see the danger lights flash twice. After that, turn the car off and remove the keys.

Then, you need to then open the fob compartment in your vehicle. It's usually in the door jamb, on the driver's side door handle or underneath an armrest. Find the small button labeled "program" and press it. After the program is complete you will hear a chime.

It's time to put your Intelligent Key to the test. Stand some distance away from the vehicle, then hit all the buttons on the key. If the lights flash, or the horn sounds, the key is connected to the Nissan. It is also possible to test it close to the Nissan.