It's Time To Forget Window Handle Replacement: 10 Reasons Why You Do Not Need It Choosing the Right Window Handle For Your UPVC Window

The proper window handle is essential for a properly installed uPVC. You'll require a design that is not only functional, but also complements the aesthetics of your home.


It is simple to swap it is easy to change a uPVC handle. All you need are the tools listed below and a few minutes of your time.

Metal

The window handle made of metal can be a beautiful accent as well as an essential piece of hardware to improve security at home. There are many metal window handle options that can be adjusted to various frames and materials. Some of these handles are made specifically for sash windows to make closing and opening the window more convenient and less likely to jam. For those seeking a more secure option, there are several locking mechanisms designed to block the window from opening beyond a certain amount.

The most common type of window handle that is used on UPVC is the epag handle. These have a mental spindle on the back which is connected to the window frame, driving the window mechanism. Both UPVC and aluminum windows come with them.

Cockspur handles are found on older UPVC window frames. They can be more difficult to use than modern Espag handles as they have an old-fashioned locking mechanism for pegs.

For a sleeker design There are cam handles that are available. They feature a refined edge and are designed to work with many other types of uPVC windows. They are perfect for tilt and turn windows in which you can open the window from the bottom while being in a position to open the top.

It is essential to take a variety of factors into consideration when selecting new metal window handles, including step height and the direction in which the handle rotates. The distance between the underside and the bottom of the screw plate is the most important factor to consider. The second factor is the direction that the handle can be turned. Some handles are able to rotate in only one direction, like clockwise. Others can only rotate in the opposite direction.

Plastic

There are many different types of window handles made from plastic. All are designed to operate windows and secure them against unwanted intruders. They are available in a range of colours and styles to match uPVC and aluminium windows. Some of them also have a lock built in. This increases security, allowing you to keep the window open and safe from intruders.

Window handle issues can develop in a myriad of situations. Sometimes, they may not be able to rotate properly. This can be caused by dust entering the mechanism, causing obstruction or dirt. Another problem that can be observed is when the window handle begins walking tightly or clings to something. This indicates that the window handle requires attention.

It is essential to contact an expert when this happens. They can help you solve the issue swiftly and efficiently. They can also provide advice on how to replace a handle made of plastic with one that is more reliable and more efficient.

window handles repairmywindowsanddoors.co.uk will make use of the same fasteners, no matter what type of handle you're using. It is therefore simple to change the window handle and lock using the exact model.

When it comes to finding the right replacement handle, it's best to be aware of your window's size and design. This will allow you to find the perfect handle that fits your windows perfectly and won't cause any problems. Be aware of the spindle size - it's the distance the handle nose extends from the base. This is a crucial aspect to consider if you wish to make use of your new window handle with a limiter fitted.

Casement

Similar to awning windows, casement windows hinge on the top and bottom but they open sideways to the left or right, rather than opening vertically. They are easy to maintain and give you a fantastic view of your yard or garden. They also let in fresh air. They're a popular choice for new construction and they can add an architectural element to older homes too. However, as time passes, they may become difficult to open or close because of worn-out hardware or damaged gears. In certain cases the window expert may require replacing the entire crank mechanism.

Casement or awning windows typically feature a roto-gear and crank mechanism that allows the window to be opened and closed, but they also feature the ability to lock to keep the sash securely in place when closed. The window lock on a casement works in conjunction with the bezel locks on the frame to seal the window. Many people overtighten their window's operating handle. This can cause the locking mechanisms to operate against each with the windows to bind and not be able to open or close properly.

It's also common for the window crank handle to get worn out over time. This could happen when the window is shut and opened repeatedly over a prolonged period of time. It can also happen when the window was used as a prop while it was opened and causing the handle to rub against and damage the crank shaft or gears.

Replacing a window with a casement or the awning window crank is a straightforward DIY window repair. It could save you money over time. First, you'll need to locate the trim mounting screw that is holding the casement cover (Photo 3). Once you've unscrewed the screws and removed the screws, you'll be able remove the old operator handle and look at the inside of the crank mechanism. The gears may be renewed lubricated, but if they're already stripped, it's likely time for a replacement.

Cockspur

Cockspur window handles are found on older uPVC or timber windows. They are simple to operate, lock with a key and provide an effective barrier against cold and noise from the outside. The handle opens outwards when you pull the lever. The cockspur's nose closes over the wedge striker in the frame which seals the window. Replacing both the handle and cockspur wedge striker will make your double glazed windows much more efficient, and also increase security.

These handles are available for both left and right-handed windows. They can be operated by turning them 90degrees. They are fitted with an'spur' which pushes against the PVC wedge on the window frame to create an extremely secure closure. They are simple to install and come in various finishes such as white, black, satin chrome and PVD gold.

It can be a challenge to determine the backset of the cockspur, particularly if you are replacing a handle that was previously used. This handle was designed to address the issue. It has three packers of various thicknesses that can be positioned on the underside of the handle's nose.

The Schlosser Technik Apto is a premium replacement cockspur, with flexible screw fixing centers. It is suitable for many applications between 9mm to 21mm. It is also simple to install with key locking and is available in various finishes.

This cockspur handle is designed to fit windows that tilt and turn but not side opening casement windows (which have a pivot that is separate from the turn and tilt). It can be used to replace old or damaged handles on uPVC or aluminium frames using rivets instead of screws - the only difference is the method of attachment. You will need a rivet gun and rivets to fit this handle onto your existing window frame.

Espagnolette

The locking mechanism of your uPVC window is the espagnolette lock, also known as a shootbolt. They are a common feature in older homes and provide both aesthetics and security for your home. Espagnolette handles are offered with key-locking and non-key-locking mechanisms and in both inline and crank designs. They can also be straight or curved design. The key-locking button provides an extra layer of security, as it prevents the handle from being accessible from the outside by using the screwdriver's thin head stuck between the frames. This is a popular burglary method!

There's a vast selection of espagnolette handles available from at GB DIY Store. Each one has a different spindle length which protrudes out from the back of the handle. Therefore, when you are looking to replace your handles with espag, it is important to determine the current handle's spindle length to ensure you get the correct size replacement handle. Once you have done this, you can browse through our range of espag replacement handles to find the best design for your windows.

We carry a huge selection of white uPVC inline espagnolette handles that come in both key-locking and non-key-locking options. You can choose from a variety of colours and spindle sizes to blend your new handles into the frame of your existing window or décor. Our espagnolette handle collection includes classic and modern designs as well as contemporary styles. Each replacement handle is supplied with 5 different sizes of magnetic spindles that range between 15mm and 55mm so that you can easily attach the handle to your windows without needing to purchase an exact screw size!

A clever rose on the back of the rose ensures the spindle fits in the correct spot and is only inserted with the right-hand or left-hand lever, preventing any incidents. A spindle insert made of metal helps to secure the handle to the espagnolette, and the handle is held firmly in place by a clever 'click-fit' mechanism that engages when the hand is turned to emit an audible click'.