Can Window Repair Ever Rule The World? Why Window Repair Is Necessary

Cracks in window glass could be caused by a pebble thrown from the lawnmower or a large drink placed on your glass-topped table. A window that is damaged allows rain, wind, insects and other unwanted elements to enter your house.

While it is not possible to make a cracked window completely invisible but there are ways to fix it and prevent it from spreading further.

Water Damage

If water is getting into your windows it is likely that a replacement is required. The moisture could damage the wood inside the frame of your window and cause rot. It can also reduce the efficiency of your window's energy use. A reputable window company will replace your windows, without compromising the integrity of your existing frames.

Wood rot can affect the inside and outside of your windows. If you have wood windows with spots of rot, it might be possible to fix them, if they're not too much damaged. However, if the rot has spread to your muntins or mullions (the parts of your window frame that hold the glass panes) they might need to be replaced. This can cost more than a new set windows.

A deteriorated seal between double-paned windows is another issue that requires replacement. This can be a result of condensation or debris between the two panes, or it could be a sign that your window's insulation has failed. Fortunately, the majority of modern windows have the insulation built-in. This means they can't experience the same issues that older multi-paned windows.

A cracked, loose or rotting casings around your windows are ugly and could lead to other issues. It's not necessary to replace your windows if the casing is damaged. Depending on the condition of your casing and the wood surrounding it you may be able to sand it and paint it to improve its appearance.

If the exterior casing isn't in great condition, a new layer of weather-resistant paint for your exterior might be the best solution to stop moisture from destroying your window. Installing window repairs can be a stylish and practical improvement to your home.

Paint that has chipped or peeled

Frames and window sills are usually close to the elements, which means they can take a lot wear and tear from rain and sunlight. The peeling of paint around windows is mostly caused by moisture, and is particularly so when exposed wood is involved. Water seeps through the wood, and once it evaporates, the pressure below the paint film causes the paint to peel. The moisture can be caused by condensation on the interior or rain and snow on the exterior. It's important to sand and scrape the surface immediately you notice the paint begin to chip. Some meticulous painters add a water-repellent preservative or thinned boiled Linseed oil to the wood before painting to prevent moisture penetration and make the new paint hold better.

If paint begins to peel off the window, it's time for repairing your window. Before you apply a new coat, lay a drop cloth or tarp on the area you're working to catch any stray drops of paint. Get rid of any paint that has fallen off using a utility knife. Be careful not to cut the wood below or cut the underlying sheathing. Let the area dry completely after cleaning it thoroughly.

Once the surface is dry, sand it again using a fine sanding pad. This will prepare the surface for primer and create a substrate that's ready for painting. Use the correct safety equipment when using paint that is based on lead. Clean the sanded surface and tape off any other surfaces like baseboards to protect them from paint.


You can then prime and paint according to instructions on the tin that you are using. Make sure to adhere to the curing and temperature guidelines on the paint as they differ according to the type of paint. Also, make sure to paint the exterior surface with an exterior-grade paint, and the interior with an interior-grade.

Window replacements can be expensive However, repairing damaged or peeling paint is inexpensive and a good alternative to replacing the entire frame. If your window frames are unable to be repaired, it could be worth upgrading to more energy efficient windows.

Glass that has cracked

A broken window could leave your home vulnerable to rain, wind, bugs, and other unpleasant critters. If the crack or break isn't too serious you can fix it yourself. It is important to address small cracks immediately before they get worse due to temperature changes or the passage of time.

There are a variety of ways to make cracked glasses virtually invisible. But, this is not something that can be completed by an amateur. Even a small chip can cause a crack in the glass, which can result in more breakage and a costly replacement. Covering the crack with plastic is a viable solution. It covers it from the outside and stops air or moisture from leaking through, which could damage the frame or seals around windows.

Before putting on the plastic wear gloves and safety eyewear and take the broken piece of glass from its frame. You'll need a scraper, utility knife, or chisel to remove any old glazing points that hold the pane in place. Use the knife to remove any bare wood, then finish it off with linseed or a clear wood sealer.

The glass can be glued back into its original position using epoxy. This is the most time-intensive option, but it will also give your glass a more robust look. If you're using epoxy, opt for the double-cylinder model that distributes the resin and hardener in a similar proportion. This lets you determine exactly how much applied to the glass, which helps ensure a good seal.

If you have double or triple-pane windows, be sure that the gas fills remain intact when you reset the glass. These gases are important for insulating your house and keeping heat in the winter months and out in the summer. If you remove the window the gasses will escape and cause it to decrease its energy efficiency. You can replace the gas fills using the same method that is used for repairing cracks in other kinds of glass.