Learn What Kia Picanto Key Fob Replacement Tricks The Celebs Are Using How to Replace a Kia Sportage Replacement Key


For many Kia models, the key contains the keyless entry system that is built into the key. The key is usually akin to the remote control and can be replaced with a fresh one from an Kia dealer or a locksmith.

Key fobs can fail to function due to a variety of reasons, including a dead battery, worn-out buttons, signal interference or water damage. Here are some suggestions to assist you in getting your Kia sportage replacement key working for good.

How do you replace the remote key or smart key?

The battery in your Kia's intelligent key will eventually need be replaced, whether it is a remote key that starts with a push button or a regular key that doesn't have an electronic transponder. This is especially in the event that your vehicle displays a message that indicates that the smart or remote key has a low battery.

This is a relatively simple process. To replace the keyfob battery remove your mechanical key from the slit that is located at the back of the fob. Then, push the cover open. A small screw will be located inside the key fob, which holds the battery in the correct position. Remove the old battery by removing the screw with a small screwdriver. Then insert the new one and close the slit on the key fob.

Test the key fob by pressing the lock or unlock buttons. If the doors unlock and lock according to your expectations, then you're in good shape! You can now use the hands-free feature to lock and unlock your Kia when your fingers get cold or you have to run errands around Brandon.

Note: Some key fobs may need to be programmed (transponder chips or smart keys). This requires a particular programming machine that only the dealer or automotive locksmith can access. Other keys (non transponder keys made of steel), do not need programming. If your key has to be programmed again, you will need to know the key code number printed on the tag of the key code and keep it in a secure location.

How do I replace a battery

If the Kia key fob does not respond to pressing the lock/unlock button, it is most likely that the battery is depleted. A battery that is not functioning properly could cause other issues, such as the check engine light turning on or delayed engine cranking. Fortunately replacing the battery on the key fob is a simple DIY project that requires just the most basic tools.

Before beginning the process ensure that your vehicle is off and all doors are shut. Find the small metal or plastic piece at the bottom of the key fob. Press it until the metal key comes out. This key can be put into the door's driver handle to unlock your car.

To replace the battery in the key fob remove the cover at the rear. Make use of a plastic pry tool to open the latch that holds the black negative cable. Take the old battery out, and then position the new battery in a way that its "+" side is facing you, and the "-", negative side is facing the fob's electrical contacts. Avoid using too much force when pushing the new CR2032 into place to avoid breaking or bending the steel contacts.

After the new battery has been installed then turn the key fob off and on in the ignition until the door locks cycle. Then you can test your Kia key fob to determine whether it's working again.

How do you replace a keyless key

There is a possibility of having a standard keyfob or a Smart Key depending on the model of Kia Sportage. The difference between them is that the smart key is equipped with the small blade of a key tucked inside it, while the standard key fob does not. Both types of key fobs are equipped with batteries that eventually will need to be replaced. Fortunately, it's an easy task that will take about two minutes.

Before you start, you will want to make sure that you are on a flat surface with adequate lighting and that your Kia is turned off. Also, remember that there are tiny parts inside the fob which could be snagged if not cautious.

The release button for the small size is located on the lower backside. It will be either an oval silver button or a rectangular slot. You can open the key fob by pressing the button.

After the key fob has been open, remove the old battery. The new battery is a CR-2032, and can be bought on the internet or at your local auto parts shop. After you've finished, your key fob should allow you to lock and unlock your vehicle, even if it isn't running.

How to replace the mechanical key?

The Kia keyfob is a great convenience that lets us lock or unlock our car by simply pressing one button. Like any device like a key fob, the Kia may have issues. There are solutions to resolve these issues and keep your key fobs functioning for an extended period of time.

One of the most common issues is a low or dead battery. G28CarKeys can cause your fob to stop working or operate intermittently. If this is the problem, replace the battery with an entirely new battery.

If this doesn't solve the issue then try using a normal flat-head screwdriver to break open the fob's plastic casing. Be sure not to damage any internal components, or scratch the plastic. Once open, carefully remove the battery that was removed and replace it with a new one.

After the new battery has been put in, shut and open the doors with the mechanical key (every key fob in the kia has an emergency mechanical key that can fit into the slot). Test the key fob to confirm it's functioning correctly. If the device isn't working, call an authorized locksmith or dealer to solve the issue. Make sure they cut you an emergency key that functions across all trunk and door cylinders, to prevent lockouts in the future.