Seven Reasons To Explain Why Volkswagen Car Key Replacement Is So Important Volkswagen Key Programming Tips

Volkswagen offers an easy way to replace a key that has stopped working or add an extra. With just a few easy tips, the process is easy and affordable.

The first step is to locate the correct key fob. It should either have a keyblade that is able to be flipped out or inside the keyfob. Take all the documents needed to prove ownership. Finally, head to the dealership or a third-party locksmith.

Immobilizer

The immobilizer feature is an anti-theft device that prevents keys that are damaged or not authorized from being able to start the car. The system operates by recognizing a distinct chip inside each key. VW dealers or automotive locksmiths can program additional keys. However the process requires tools and software. The right tools are required for a smooth process. Before starting the key programming process technicians must recreate the issue in order to pinpoint the problem. They should also look for fault codes on the vehicle, check for technical bulletins (TSBs) and also test the battery on the key fob.

A Volkswagen key with an unprogrammed immobilizer chip will shut off the engine after a couple of seconds of cranking. The immobilizer chip doesn't prevent the alarm from turning on or allowing doors to be opened. The key fob's immobilizer is an additional component that is attached to the metal flip half of the car key. It must be programmed to the computer in the vehicle to function.

A new key added to an VW is more expensive than creating a duplicate key in the event that all the original keys are lost. The key must be bought from the manufacturer, then it is subject to a special programing process to be synchronized with the computer in the car. It can be done by a professional and a software tool such as VagTacho or VCDS. This procedure is recommended for vehicles running the older Immobilizer 2 system and earlier.

Electronic Ignition

Electronic ignition on a key is a vital component of the anti-theft system in a car. The feature is activated when the key fob is put in the ignition. However, it's not foolproof. It is susceptible to failures, which can result in your VW engine not starting. This can be due to many reasons, such as incorrect key programming or a poorly maintained car battery.

Luckily, you can prevent this problem by getting your Volkswagen car key fobs programmed professionally. This can be done either through a dealer, or an locksmith. The cost for this service varies, but are usually between $90 and $150. Additionally, these prices are contingent on the year and model of your vehicle.

You'll need your main key to program the new VW key fob. The new key must be able to start the engine of your vehicle. This will allow the onboard diagnostics to recognize it as a legitimate key. The immobilizer light will turn off.

Certain models require a threeor four-digit PIN to allow key programming onboard. Some models may require a scan tool. Locksmiths or dealers can use a specialized scanner to perform onboard key programming. These tools aren't found in car accessory stores. You'll need to purchase one from the dealer or borrow it.

Keyless Entry

If your Volkswagen key fob has battery issues, or you've lost it all together it's likely that the car will start, but it isn't able to unlock. Luckily, it's easy to fix the issue. The first step is to check that the key fob is within reach of the vehicle. If it is in range, press and hold down the lock button until the light on the key flash for six seconds.

This will reset the proximity of the key fob to your VW. You can then unlock the vehicle again by pressing the unlock button on the key fob. If the vehicle doesn't unlock following this procedure, you'll need to contact the dealer to get the key programmed.


The cost of programming a brand new Volkswagen Key could be costly. It is recommended to get quotes from several dealers before choosing the one that is most suitable for you. Also, check if the dealer charges for key programming and for the new key itself.

The purchase of a second Volkswagen key is a smart idea for many reasons. You may need a backup in case of theft or you may lose your primary key. If you have a spare key and wish to program it so that it is compatible with your Volkswagen here are some simple steps to follow.

Remote Start

As opposed to the previous generation of key fobs, which communicated with your vehicle through radio waves, Volkswagen's remote-start systems connect to your car using an encrypted wireless connection via cell technology. This means that your VW Atlas, Jetta, or Passat is able to detect whether you're in range and enable its features like keyless entry or push-button start. It's as simple as opening the app and connecting your smartphone to your vehicle, and then pressing the button.

Before you attempt this, make sure your Volkswagen is parked and that the driver's door is closed. replacement volkswagen key will ensure that only the correct key is being used to access the features of your car. Dashboard will display an error if the key is not recognised. This method is only compatible with newer VW models with an RFID sensor ring mounted on the steering wheel. These models require a secret pin to be programmed.

Close the door to the driver's side and remove the main key to create the new keyfob. Press the lock button of the new keyfob. This will signal to the vehicle that the key is a valid working key. The key will start sending signals to enable you to open your driver's side door and also start your car remotely. Some say it only works when there's clear sight of the car. Others report success even in parking lots that are crowded.