16 Facebook Pages That You Must Follow For Double Glazing Lock Repairs-Related Businesses Double Glazing Lock Repairs

The best locks for your windows and doors can stop burglars from getting into your home. They aren't likely breaking glass or trying to squeeze through open windows.

However, some double-glazing owners have encountered issues with their door lock or window lock after it's been installed. These problems can often be solved without the need to replace double glazing.

Broken or faulty locks

If your uPVC door or window lock is broken or faulty, then a locksmith can fix it for you. They will be able to fix the striker plates, hinges, and locks on your double-glazed. They can also move the cylinder around to correct any misalignment issues that may be causing the handle to not function correctly.

The mechanism may be locked when the key fits into the lock, but it will not turn or be difficult for you to insert. Grease or dirt can get stuck in the mechanism. If this is the case, it is possible to clean the lock and lubricate it. Make use of a dry lubricant, such as graphite or teflon, not oil, because oil can attract dirt and cause it to stick to the inside of the mechanism. After lubricating the lock you need to insert the key and then try to turn it. The lubricant will work through the mechanism and the lock should be able to rotate without difficulty.

A faulty lock can also be caused by loose screws inside the lock mechanism. They can become loose and fall out or break completely and stop the lock from functioning properly. These screws can be tightened by using a screwdriver, but be cautious not to tighten them too much. This could cause damage to the internal components.

A damaged lock can be dangerous for your family and you. This is especially true if you have small children. It's possible for them to unlock the door without your knowledge and thus give them access to your home. If you're worried about the possibility that this might occur, a professional locksmith can help re-secure the double glazing doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and broken mechanisms on both uPVC windows and doors. We can also modify your uPVC or double glazing locking system to meet your specific requirements, which means that in a lot of cases replacement windows and doors are not necessary.

Handles that are damaged or faulty

Many double-glazed windows have the multi-point lock as part of the overall security package. This is a great choice for those who are worried about burglars who are opportunistic and trying to gain entry into their home. It's also worth asking your installer about anti-lift locks which can be put in on top of the locks already in place and will keep your window secured in its closed position.

It's not uncommon for handles to be damaged or fail. They are the first component of your window that will be pushed open by criminals who want to break in. Fortunately, the good news is that this is one of the most straightforward parts to fix.

Modern uPVC handles and aluminum handles come with a multi-point locking mechanism known as Espagnolette that is designed to resist forced entry. This security upgrade is usually available as an extra on new uPVC window installation. As an upgrade option, older aluminium or uPVC handles that are no longer used can be upgraded to a shoot bolt locking system.

It is essential to fix handles as quickly as possible after it has been damaged. A damaged handle can stop the window from closing correctly and letting in a draft. It may also be a weakness that burglars with a plethora of opportunities could exploit, putting your belongings and family at risk of being stolen.

To fix the malfunctioning mechanism, first access the window frame and remove the broken handle. The gearbox can then be accessed to determine the type of gearbox that is used to open the handle. This will permit a replacement that matches the profile and the internal window frame mechanisms.

After the mechanism is replaced, the handle may be put back together using the original screws. We recommend replacing them with more long screws since they provide the most secure fit. The final step is to seal the handle using an opaque sealant. This will help protect it from further corrosion. Once that's done the window will be fully operational again, and at only a fraction of the cost of replacing the entire window.

Broken or Faulty Hinges

If your windows do not close properly, you may experience draughts, the weakening of your home's security and an increased risk of damp or water damage. Windows hinges that break or become faulty are a common problem and are easily fixed.

If your windows made of uPVC won't open or close, it is likely that the hinges require to be repaired or replaced. Most window companies will require you to purchase an entirely new window unit to address this issue, but we are able to replace the hinges to save you money.

Window hinges can be damaged by repeated use or they are weakened over time by corrosion. If you have a broken window hinge, it's crucial to take the necessary precautions to prevent further damage. This includes not forcing the window to close or open.

double glazing Edgware can find the correct parts for your hinge by identifying the type of hinge it is. The most commonly used types of window hinges include Maco, Mila, Roto and many other brands. It's best to consult a professional in this case to ensure that you don't make the mistake of buying parts that aren't compatible with your existing hardware and cause further damage.

The hinges that are not working properly can cause major issue for your uPVC window and doors. They can be the main source of noise, and can also allow water to infiltrate your windows.

To fix this issue, first make sure that the pin barrel on both hinge halves is aligned. If it's not, tap the head pin with a hammer to make a small bend in the barrel of the hinge. This will keep the pin in position. Then, ask a helper to hold the door while you take the hinge screws and hinges from both the doorjamb as well as the door. Replace the hinges and install screws with glue. When the glue is drying, fix the hinges by using weights or clamps.

Once the hinges have been fixed after which you will be able to re-install the door and re-attach the handle. It is recommended to replace the screws with the same length of wood dowels as the original screw so that they are in line with each one.


Broken or damaged glass

uPVC Windows can be damaged over time, despite the fact that they are excellent at keeping out the cold and retaining heat. This could include damaged or broken glass and damaged locks. If left unattended, this can turn into a major expense. It can also affect your home's aesthetics and lead to a loss in insulation. It is essential to fix any damage as soon as it occurs.

If your glass is cracked but not shattered it is possible to fix it yourself with the proper tools and techniques. Make sure the area around the glass that has been broken is free of debris to ensure that shards do not cause injury or trip hazards. Then, remove any broken glass pieces and dispose of them in the appropriate way. Apply masking tape across the entire area. This will stop glass shards from sticking to your skin and splintering when you move them. Pre-fitting the glass pane prior to adhering it to the wall is recommended when you have windows that have two panes. This will ensure you have enough room to finish your project.

Before applying the glue, wipe the surface of the damaged frame and glass with a a dry, clean cloth. Follow the directions for application and curing time which may differ from one product to the next. You may have to clamp the cracked glass with clamps made of lightweight materials designed to hold fragile materials, depending on the angle.

Once the adhesive has fully cured, carefully install the glass in the window frame. Make sure it is in line with the frame edge and that there aren't any gaps between the glass sash and frame. Avoid bending the glass as you put it back in place, as this could weaken the seal. This could result in water infiltration or condensation.

Get in touch with a professional glazier, like O'Brien(r) for a replacement if your glass window is completely shattered. Unattended handling of broken glass can cause danger to pets and children It's therefore essential to act swiftly.