The Secret Secrets Of Pellet Stove Furnace Pellet Stove Furnace

Pellet stoves can be purchased as freestanding units or fireplace inserts that give your home the look of an old-fashioned wood-burning fireplace. These stoves are available in freestanding models as well as fireplace inserts. They can provide the appearance of an old-fashioned wood-burning fire.

The auger transports pellets from the hopper into the combustion chamber where they are ignited and generate heat. Sensors are able to monitor the flame and adjust the rate of operation to maintain a desired temperature of the room.

1. Energy Efficiency

Pellet stoves burn renewable non-toxic, non-toxic fuel that is made from compressed sawdust and wood chips. They also contain bark and other materials that are typically put in landfills, but can be repurposed into an efficient and clean source of heating. They can help homeowners cut down on their energy consumption, and thus greenhouse gas emissions. Many users of pellet stoves say that they can recoup their initial investment in only a few short years through a reduction in their heating bills.


Pellets are extremely compressed and more solid than natural wood, making them more efficient to burn. They also produce less creosote than traditional wood-burning fireplaces. They are also stored in plastic bags that keep out moisture and require less frequent cleaning.

Pellet stoves, just like other heating systems, need to be sized and vented properly. A skilled technician can assess your space and venting requirements to ensure the best results.

When the installation is completed the hearth is constructed according to your specifications, and the vent is installed via a hole pre-cut in the siding of your home. The vent may be installed through a sidewall or roof depending on your preference and the local laws.

After the hearth and vent are completed and the stove is ready to be plugged in. Certain manufacturers provide remote controls that make starting and maintaining the fire easy, while others have additional sensors that monitor airflow, combustion flue temperature, pressure. When the system detects it requires more or less pellets, it will signal the auger to speed up or slow down in line with the need.

Each stove comes with a storage hopper that holds between 35 and 130 pounds of pellets until they're required. Hopper capacities determine the frequency at which the stove needs to be refilled and larger hoppers allow longer intervals between refills. A grille pulls air from the room, then passes it over the heat exchanger and then blows heated air in the living space through convection. A grate or auger spreads the pellets, and an under-sink pan collects any unburnt ones, along with the combustion residue.

Pellet stoves are less energy-intensive than wood-burning models but not as efficient as electric heaters or natural gas furnaces. The electric components that drive their motorized parts require an electrical supply which could cause problematic during an power outage, even though backup systems are readily available like batteries and generators.

2. Low Maintenance

Pellet stoves are incredibly efficient, but like any other major heating appliance, they require a bit of maintenance to ensure that they function properly. Regularly cleaning your stove's exhaust vent and stove will prevent the accumulation of harmful creosote which could cause a fire, explosion or damage to your home or stove.

A pellet stove is a device that burns compressed natural wood pellets or other materials (like corn kernels, nutshells or small pieces of wood scraps). The pellets are inserted into the combustion chamber by an auger that is powered by electricity. The thermostat you set controls the rate at which pellets are fed to the burner. This lets the fire keep roaring or lower or even shut down according to the temperature you set. The ash is disposed of in an empty ash tin underneath the burner. This can easily be removed and then disposed.

Pellets are made from waste products that would have been discarded during the process of processing lumber. They are renewable and release significantly less particles into the air than traditional wood-burning stoves which results in a clean burning heat source. The amount of carbon monoxide, carcinogens and other harmful chemicals emitted by pellet stoves is significantly lower than that of modern EPA-certified wood stoves.

These appliances are not required to be vented via chimneys, as is the case with traditional wood stoves. Instead, they must be vented correctly via a wall, or any other exterior structure. Pellet stoves come with flue ports that open from the rear or the top of the appliance and are connected to a vent pipe that extends outside the home.

A pellet stove has one disadvantage it requires you to purchase or store enough fuel pellets to last the whole winter season. On average, owners of pellet stoves use three tons of pellets throughout the course of the winter season at a cost of $200 per ton. These costs increase over time however it's much less expensive than buying and hauling firewood for traditional fireplaces or stove. Make pellet stove dealers near me that you purchase enough pellets so that your stove can function through the coldest months and that you have the right place to store them (preferably dry, cool and away from the ground).

3. Reduce carbon footprint

Pellet stoves generate heat from renewable biomass fuels, reducing reliance on finite fossils fuels. This reduces carbon footprints and diversifies energy sources for homes.

Even the latest wood stoves that are EPA certified emit significantly less carbon dioxide than pellet stoves. The emissions of pellet stoves are also lower than those from gas furnaces. Pellets are made of wood, sawdust and other lumber leftovers and can also comprise different materials including corn, soybeans, nutshells, cherry pits, and agricultural waste. When they are burned, they release less particulates, which could cause respiratory problems and allergic reactions and carcinogens as well as nitrous dioxide.

The main difference between wood stoves and pellet stove is the feed system. Pellet stoves have hoppers that hold the pellets. When the thermostat or sensors signal that the room is in need of heating, the auger turns and the pellets are pumped into the combustion chamber where they are burned and generate heat. The air that is released from the combustion chamber is pushed through a heat exchanger, which transfers the heat to the blower before releasing it into the room. This process produces very low emissions, and creosote is not produced.

After the hopper is empty, the ash is removed by a cyclone, and is deposited in an ash bin. The stove is equipped with an air-flow system that circulates the clean, heated air throughout the room. Most pellet stoves require only minimal maintenance and come with a huge viewing area for you and your family members to enjoy the flames.

The most significant aspect that affects emissions from stoves made of pellets is the quality of the pellets. Pellets that are not of the highest quality will cause more emissions. When choosing your pellets ensure that they are certified to meet certain standards and don't contain other ingredients like urea or petroleum products. Also look for a company that has a warranty and will repair or replace components in the event of a malfunction. Certain states provide homeowners with a tax credit if they want to go greener. This is a great opportunity to offset the initial cost of this type of stove and make it easier to install.

4. Reduced Noise

Pellet stoves emit very little smoke and exhaust as compared to wood burning fireplaces. A fan is used to spread heat more evenly throughout the room. This is the reason pellet stoves need less maintenance than wood stoves. While wood stoves have to be cleaned regularly of chemicals and particulates pellet stoves require a specialized metal vacuum cleaner for regular cleaning.

Many manufacturers have designed their stoves so that they are simple to set up and operate as well as maintain. Their appliances are available in a variety of styles that complement the decor of your home. Some even come with a programmable thermostat remote control, as well as WIFI apps that let you monitor and manage your stove from anywhere in the world.

The majority of pellet stoves have a large fuel hopper that can contain between 35 and 130 pounds of pellets. The pellets are then fed to the combustion chamber through an auger. The speed at which pellets are fed to the burner determines how hot the fire is and also the amount of heat produced. The hopper can either be filled with hardwood pellets, composed of dense wood species such as oak and hickory, or softwood pellets. A lot of stoves can burn biomass pellets made from switchgrass and corn. This is a green option.

Since pellet stoves burn as a clean fuel, they produce far less smoke than traditional wood-burning fireplaces, and require less maintenance. They also don't require a chimney, which makes them a much more suitable choice for new constructions or retrofits.

As opposed to wood stoves that require regular maintenance to keep cleaned of creosote and other chemicals, pellet stoves require periodic inspections for proper operation and maintenance. Based on the model, this could include a periodic inspection and cleaning of the accumulated ash or "clinker," as well as the motor and fan. The dealer of your appliance can explain the correct procedures for the specific model and brand. He can also provide you with information regarding safety and storage, and help you find the right fuel for your stove.