A Time-Travelling Journey How People Discussed Repairs To Upvc Windows 20 Years Ago Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. It is important to ensure that your windows are in good working order.

For single pane windows, it is relatively easy to replace windows, and the new one will generally fit within the old frame very easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth before you start working on the glass to ensure that any fragments of glass fall onto the cloth instead of landing on the floor where they could be trodden under and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional is able to come out and repair the window. It also acts as a barrier to prevent any criminals from getting into your home. If the distance between the window and the door is large, you might prefer security screens that includes a window. This will give you the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. However, with time, they are susceptible to a range of problems including sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It's crucial to act as soon as you notice your uPVC windows are sagging.

Repositioning the hinges can aid in fixing a window that is sagging. You'll first need to open the windows to reach the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close your window and verify the fitting. If you are happy with the fit of your window, you can tighten screws to keep them in place.

If you are unable to reposition the hinges, you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loosen. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and safe from drafts.

uPVC handles can also become loose. Most often, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need close the window and then perform an experiment to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it does not you can use a screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's important to take action. Water leaks from windows are not just a cause for degradation of your home's structure but also hamper your efforts to control the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame has been damaged or is missing.


This is a relatively easy fix and should be undertaken by any competent DIYer. Based on the severity of the problem the old caulking might need to be removed before a new layer can be applied. It is important to keep in mind that when it comes to uPVC window repairs , do not be tempted to apply too much caulk in order to make the area harder to clean and can reduce the efficiency of your energy.

It is important to check that the drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This mold thrives in damp environments and can quickly spread throughout the house.

It is also important to note that if the leakage originates from the glass of your double-glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. Again this can easily be corrected by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with ease, it may be the hinges that are at the fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical component, hinges can be damaged over time. It is an easy process but it can be easier to do if you have someone to help you hold the frame in place.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue can be caused either by opening the window improperly or due to a poor installation in the factory. Sending us photos through our website can often solve the issue. We are always happy to offer advice.

Regular lubrication of the hinges is essential. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also decreases the risk of a window sticking and help prevent corrosion. This should be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. The hinges may also become unbalanced due to wear, which can cause a gap where the sash and frame meet. They can be repaired by giving them a good clean, but if they are beyond repair it may be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge of the window, may be misaligned. Again, it's feasible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

The next most common reason for draughts are the window seals. These are prone to wear or damaged over time, and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also reduce draughts.

Lastly, one of the most effective ways to reduce drafts is to use a draught excluder, these are usually fabric tubes which are filled with a kind of filler. They can be positioned on top of your windowsill. They will help keep cold air out and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security to your home by performing regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it is cheaper to replace them rather than repair them. So, if you are experiencing issues with your Upvc windows, it's recommended to seek help from a professional as soon as possible.