The Reasons UPVC Window Repair Is Much More Hazardous Than You Think uPVC Window Repair

Despite its resistance to harsh weather, uPVC may develop issues that require fixing. Fortunately, these issues can be repaired easily at a fraction of the cost of replacing a window.

A common issue is that a window becomes difficult to open due to its hinges being stiff. Fortunately, this problem can be easily fixed by lubricating the hinges using something similar to WD-40.

Cracked or broken glass

Glass is everywhere in our homes: on windows, doors and tables, in microwaves and stoves even in picture frames. Windows can break due to a good hit or rough-housing between friends. They must be repaired before they become worse. Cracks of this kind can be easily repaired without having to replace the window's glass or frame.

To begin, clean the area with a damp cloth to get rid of any dirt, dust or fingerprints. Use repairmywindowsanddoors.co.uk to seal around the crack. Allow the epoxy to dry completely before moving the window back. This is a very simple repair that will help you save the cost of replacing your uPVC windows.

The gasket on the window can become soft or even separate from the frame. This will result in a loss of insulation as well as a opening for cold air or water into your home. This can be easily repaired with a flat blade such as an ATM card to cut the gasket from the frame of the window. If you've got a amount of time on your hands you can also apply a bit of epoxy over the crack to make it look like the crack was never there in the first place.

Use a piece of tape if the crack is too deep for you to reach it with your fingers. This will prevent further damage. Alternatively, you can apply clear nail polish to fill in the crack and prevent it from growing further. The most important thing is to apply this treatment as soon as you discover the crack, as it will quickly spread and be more difficult to repair.

If you are seeking a permanent fix, consider uPVC epoxy. This is the most time consuming of all the alternatives but it will yield the best results in terms of durability and appearance. Follow the manufacturer's directions for applying the epoxy. Once it has dried, use an acetone-soaked rag to clean the surface.

Water Leaks

uPVC Windows are durable However, they require some attention and maintenance. They can cause a myriad of problems if not maintained correctly. These issues could range from water leaks around the frame, to condensation within the glass units.

A reputable uPVC window repair specialist can help to identify the issue and then fix it. They can also offer suggestions on how to avoid it occurring again in future.

Leaking uPVC windows can be a major issue and it is essential that they are repaired as soon as possible. If left unattended the damage could cause significant damp problems for your home, leading to expensive repairs and a reduction in energy efficiency.


In a majority of instances, a leaky uPVC window can be repaired by applying a leak patch. This is a sealant that is applied to the inside of the window. This will prevent water from entering your home through the damaged region.

Double-glazed units that appear cloudy or misty could be a sign of a leaky seal. It could be due to many reasons, such as age, weather conditions or just wear and wear and tear.

You can prevent this by having your windows cleaned regularly. It is recommended to clean windows at least twice per year with a soft white cloth soaked in warm water and soap that is liquid. It is important to stay clear of using any colored cloths because they can leave dye stains on the plastic. Solvent PVC cleaner is the best way to remove stubborn stains. It can be purchased from any hardware store and is simple to apply. Remember to wipe the window frames in a shaded area away from direct sunlight in order to avoid streaks.

Faulty Hinges and Locks

Over time, a hinge for windows may break or bend out of shape. This can lead to a gap forming in the frame, which will let draughts in and decrease energy efficiency. A draft can make your home feel cold and uncomfortable and can result in increased heating costs.

A uPVC window's gap is a problem that can be fixed easily. A uPVC window repair specialist will be able to pinpoint the problem and fix it. Usually, a small hole can be fixed with carpenter's glue and a wooden dowel inserted into the gap. The dowel should be positioned so that it is in line with the hinge leaf and has an even surface. The adhesive of a carpenter is applied to the dowel and then tapped into position. Once it is dry and cured, a screw is put in to fix the hinge.

UPVC window hinges and locks may become stiff to open and close as a result of general wear and tear or obstructions caused by dirt and dust. They must be maintained and cleaned often to ensure they function properly. Make use of WD-40 to keep moving parts in good condition.

It is recommended that UPVC windows are cleaned at least two times per year. The damp cloth should be coated with an emulsion of mild detergent and water. To prevent rust and dirt clean the areas around the corners more frequently.

The handle of a uPVC window can also become stiff to open or close. This could be the result of the handle being thrown off or caused by issues with the locking mechanism. This is generally a quick and simple fix and can be done by the homeowner themselves when they follow a few simple steps.

A damaged lock poses an issue for security, since it can make your home vulnerable to intruders. A faulty lock may also make it difficult to open your uPVC window or door and could cause inconvenience for you. If this is the case you might need a new handle or align the multipoint locking system.

Stuck Handle

When your upvc handle becomes stuck, it can be frustrating. Particularly when you try to open your window only to discover that it requires a lot more force or doesn't open at all. This is due to a wire inside the handle holder that has become rough. By removing the handle and having a look at the wire, you are able to smooth the rough areas and fix the issue.

Another way this can be addressed is by putting a graphite or paraffin lubricant on the pole sliders which will then allow the handle to move upwards and downwards. It is also a great time to clean your handle because it will stop any future issues.

If the problem is related to the push button, it can be repaired by using superglue. Make sure that the glue is completely dry before attempting to use it again. If the handle has been completely damaged or broken, you can replace it by purchasing a replacement and screwing it into the frame. This is a much easier fix than replacing the entire window frame and is something you can tackle yourself, particularly if you have the right tools.