10 Facts About Double Glazing Lock Repairs That Can Instantly Put You In A Good Mood Double Glazing Lock Repairs

Having quality locks on your doors and windows will stop burglars from gaining access to your home. In general, they don't enjoy breaking glass or slipping through windows that are not closed.

Some owners of double glazing, however, have experienced problems with their window or door lock following the installation. These issues can usually be solved without the need for new double glazing.

Broken or Faulty Locks

A locksmith can repair your uPVC window lock or door lock if damaged or broken. They can repair hinges, striker plates and locks for your double-glazing. They can also move the cylinder in order to fix any misalignment that could be causing your handle to operate correctly.

double glazing window repairs could be seized if the key fits in the lock, but it will not turn or is difficult for you to insert. Dirt or grease can get stuck in the mechanism. If this is the case, then it might be possible to clean the lock and then lubricate. It is important to make use of a dry lubricant such as graphite or teflon instead of oil, which attracts dirt and adhere to the inside of the mechanism. After having lubricated, insert the lock key into the lock and turn it. The lubricant will work its way through the mechanism and the lock should be able to rotate easily.

A faulty lock can also be caused by loose screws within the mechanism of the lock. They can become loose and fall out, or even break off completely, preventing the lock to function properly. A screwdriver can be used to tighten these screws, however, it is important not to tighten them too much, because this could damage the internal components.

A broken lock can be hazardous for your family and you. This is especially the case if you have children. It is possible for them to open the door without your knowledge and give them access to your home. If you're concerned about this happening, then a locksmith who is vetted can provide fast and efficient assistance to secure your double glazing doors.

Misty Glaze are a professional uPVC and double glazing business in Lancing and can repair all kinds of damaged and broken mechanisms, handles, cylinders and lock systems on both uPVC windows and doors. We can also alter your uPVC or double glazing locking system to meet your particular requirements, which means that in many cases replacement windows and doors are not required.

Handles that are broken or damaged

A lot of double-glazed windows come with the multi-point lock as part of the overall security package. This is a great option for those who are concerned about potential thieves who may try for ways to gain access to your home. It's also worth asking your locksmith about anti-lift blocks that can be installed with the locks that are already in place to will keep your window locked in the closed position.

Handle locks are often damaged or fail. They are the first thing criminals will employ to open your window. The good news is that this is one of the easiest parts to fix.

Modern uPVC handles and aluminum handles come with a multi-point locking mechanism, referred to as Espagnolette that is designed to resist forced entry. This security upgrade is usually provided as an additional option on new uPVC window installations. Older style uPVC and aluminum handles can be upgraded to lock bolts that shoot and again as an additional feature on all new double-glazed windows.


If a handle is defective, it is essential to get the handle repaired as soon as is possible. A damaged handle can stop the window from closing correctly and letting in a draft. It could also be a vulnerability that thieves who are opportunistic could exploit and put the belongings of your family and your own at risk.

To repair the broken mechanism, first gain access to the window frame, then take off the damaged handle. The gearbox is then opened to determine the kind of gearbox used to open the handle. This will allow to replace the handle that matches the profile and internal window frame mechanisms.

Once the mechanism has been replaced the handle can be fixed using the original screws however, we generally recommend replacing them with larger ones as this will give a more secure fit. The final step is to seal the handle with a clear sealant. This will shield it from further deterioration. After that your window will be functional again, and at less than the cost of replacing the entire window.

Hinges that are broken or damaged

If your windows do not close properly, you could suffer from draughts or an affliction of your home's security barrier and an increased chance of damp or water damage. Broken or damaged window hinges are a frequent issue and can be repaired easily.

If you have a window made of uPVC that won't close or open, it's likely your hinges are broken or damaged and need to be replaced. While most window manufacturers require you to purchase a new window to fix this simple problem We're able to repair the hinges that are damaged and save you money.

Window hinges are usually damaged through repeated use, or weakened over time by corrosion. If you've broken a window hinge, it is essential to take steps to prevent further damage. This includes not forcing the window to open or close.

You can locate the appropriate parts for your hinge by identifying the type of hinge it is. The most commonly used kinds of window hinges include Maco, Mila, Roto and a variety of other brands. Get advice from a professional before buying parts that do not work with your existing hardware. This can cause further damage.

The hinges that are not working properly can cause major issue for your uPVC windows and doors. They can be a significant source of noise and also allow for water infiltration which can damage your windows.

To fix this issue, first check whether the pin barrel on both hinge halves is aligned. If not then tap the head pin using a hammer to make a small bend in the hinge barrel. This will help to keep the pin in the right position. Ask a second person to hold the door while you take the hinges and hinge screws from both the doorjamb and the door. Replace the hinges and then install screws using glue. After the glue is drying, put a secure hold on the hinges using clamps or weights.

Once you have repaired your hinges, you can reinstall the door. You could also reattach the handle. It is a good idea to replace the screws using the same length of wood dowels as the screw that was originally used so that they align with each other.

Glass that is damaged or damaged

While uPVC windows do an excellent job of keeping the cold out and warm in, they may become damaged over time. This could include broken or damaged glass, as well as defective locks. This issue can be costly if neglected. It can also affect your home's aesthetics and result in a decrease in insulation. It is essential to repair any damage immediately.

You can repair the crack in your glass by yourself if you have the right tools and techniques. First, make sure the area around the glass is clear so that any shards don't injure anyone and aren't an accident hazard. Remove the broken glass pieces and dispose of them in the proper way. Then, put masking tape to the entire area to prevent fragments from bouncing around and sticking to your skin when you move them. If you're dealing with a double-paned window, it's a good idea to fit the glass pane before glueing it back in place so that you know you'll have enough room to finish the project.

Before applying the glue, clean the surface of the broken frame and the glass with an unclean, dry cloth. Follow the curing and application directions that differ from one product to the next. You may have to clamp the cracked glass using clamps that are lightweight and designed to hold fragile materials, based on the angle.

After the adhesive has fully cured, carefully reinstall the glass inside the window frame, making sure that it is flush with the edge of the frame and there are no gaps between the glass and the window sash. Be careful to avoid flexing the window while it's installed, as this could weaken the seal and cause condensation and water infiltration.

Contact a professional glazier, like O'Brien(r) to arrange an appointment to replace your glass if the window is completely shattered. It's crucial to act fast in the event of broken glass.