How To Explain Double Glazing Lock Repairs To Your Grandparents double glazing repair near me

Having quality locks on your doors and windows can stop burglars from accessing your home. They generally don't like breaking glass or squeezing through windows that are open.

However, some double glazing owners have experienced problems with their door or window lock after it's been installed. Luckily, these problems are usually fixable and don't require to buy new double glazing.

Broken or faulty locks

A locksmith can fix your uPVC window lock or door lock if it is damaged or is not working properly. They can repair hinges, striker plates, and locks for double-glazing. They can also move the cylinder around to correct any misalignment issues that could be causing the handle to not function correctly.

The mechanism could be seized when the key is inserted into the lock, but it will not turn or is difficult for you to insert. The dirt or grease could be trapped in the mechanism. If this is the case, then it may be possible to clean the lock and then lubricate. It is essential to make use of a dry lubricant like graphite or teflon instead of oil, which attracts dirt and adhere to the inside of the mechanism. After you have lubricated the lock, you need to insert the key and then try to turn it. The lubricant needs to be absorbed into the mechanism and the lock should spin easily.

Loose screws within the lock mechanism are a different cause of a faulty lock. They may loosen and fall out, or even break off completely, preventing the lock to perform as it should. A screwdriver can be used to tighten the screws however, care must be taken not to tighten them too much as this can cause damage to the internal components.

A faulty lock is dangerous for you and your family. This is particularly true if you have small children. It can be easy for them to unlock the door without knowing, and this can give them access to your home. If you're concerned about this happening, then a licensed locksmith can offer fast and efficient assistance to secure your double-glazed doors.

Misty Glaze are a professional uPVC and double glazing company in Lancing that can fix any type of defective and broken mechanisms such as handles, cylinders, handles and lock systems on both uPVC windows and doors. We can also modify the locking system of your uPVC windows or double glazing to meet your needs. This means that replacement windows or doors are not always required.

Handles that are damaged or broken

A lot of double-glazed windows come with a multi-point lock as a part of the overall security package. This is an excellent option for those who are concerned about potential burglars trying to gain entry into their home. Ask your installer about antilift blocks. These can be installed in addition to existing locks and will ensure that your windows are securely shut.

Handle locks are often damaged or fail. They are the first part that criminals will use to force open your window. The good news is, this is among the easiest parts to fix.

Modern uPVC handles as well as aluminium handles come with a multi-point locking mechanism, referred to as Espagnolette that is designed to ward off forced entry. This security upgrade is often available as an extra on new uPVC window installations. As an upgrade option older style uPVC or aluminium handles that are no longer used can be upgraded to a shoot bolt locking system.

If a handle is damaged, it is essential to get the handle repaired as quickly as you can. Handles that are damaged can prevent the window from closing properly and letting in a draft. It could also be a vulnerability that opportunistic thieves could take advantage of and put your family's possessions and your own at risk.

To repair the broken mechanism, first access the window frame and remove the broken handle. The gearbox that opens the handle is removed and the type of gear is identified so that a replacement can be found that matches the profile of internal window frame mechanism.

After the mechanism has been replaced the handle can be reattached using the original screws. However, we suggest replacing them with longer screws to ensure an even more secure fit. The final step is to apply a coating of clear sealant to shield the handle from further rust. Once that's done your window will be fully operational again, and at only a fraction of the cost of replacing the entire window.

Broken or damaged hinges

If your windows don't close properly, draughts could be able to enter, your home's security barriers will weaken and there's an increased risk of damp or water damage. Broken or faulty window hinges are a typical problem that can be fixed easily.

If your windows made of uPVC won't open or close it's likely that hinges need to be repaired or replaced. While most window manufacturers require you to purchase a new window to solve this issue We can replace the faulty hinges and save you money.

Window hinges may break from repeated use or they might be damaged through rust over time. If you have a broken window hinge, it is crucial to take the necessary precautions to prevent further damage. This includes not forcing the window to open or close.

Knowing the type of hinge you have will help you identify the correct parts to fix it. Maco, Mila and Roto are all manufacturers of window hinges. It's best to consult a professional in this case so that you don't make the mistake of purchasing parts that aren't compatible with your existing hardware and cause further damage.

The hinges that are not working properly can be a huge issue for uPVC doors and windows. They can be a major source of noise and also allow water to infiltrate that can cause damage to your windows.


Make sure that the pin barrels on both sides of the hinge are aligned. If it's not then tap the head pin using an hammer to create an arc in the hinge barrel. This will help to keep the pin in place. A friend can help you hold the doors as you take off hinge screws and hinges. Replace the hinges with ones of a matching size and then attach the screws using glue. When the glue is drying, fix the hinges using clamps or weights.

Once you have repaired your hinges, you can reinstall the door. You could also reattach the handle. Replace the screws with wooden dowels of the same length as the screw that was used to ensure they are in line.

Broken or faulty glass

uPVC Windows can be damaged over time, despite the fact that they are great at keeping cold out and keeping the heat. This could include cracked or damaged glass and faulty locks. If not taken care of, it can be a costly problem. This can also detract from your home's aesthetics and result in a decrease in insulation. It is crucial to repair any damage promptly.

If the glass is broken but isn't shattered it is possible to fix it yourself using the right tools and techniques. Be sure that the area around the broken glass is free of debris, so that pieces of glass do not cause injuries or trip hazards. Then, you must remove any broken pieces and dispose of them properly. Then, put masking tape over the entire area to keep fragments from bouncing around and sticking to your skin when you move them. Making sure the glass pane is fitted prior to gluing it in place is an ideal option when you have a window that has two panes. This will ensure you have enough space to complete your project.

Use a dry, clean cloth to wipe down the surface of the broken glass and the frame before applying the glue. Follow the directions for application and curing times that can differ from product to. Depending on the angle of the crack, you may want to secure the glass during the curing process with lightweight clamps that are designed to hold delicate materials.

After the adhesive has completely set, carefully place the glass in the window frame. Make sure it is aligned with the frame's edge and that there aren't any gaps between the glass sash and frame. Be careful not to bend the window as it's being installed, as this could weaken the seal and cause water infiltration and condensation.

If you have a glass door that's completely broken or has larger cracks, contact a professional glazier like O'Brien(r) to arrange an exchange. Unattended handling of broken glass can be a risk to pet and children It's therefore essential to act quickly.