The 10 Most Terrifying Things About Replacing A Window Handle Tips For Replacing a Window Handle

It is simple to change your window handle from the at-home comforts of your home. Follow these guidelines to ensure an elegant and smooth finish.

Begin by removing the screws to reveal the screws within the uPVC window handle. Measure the spindle to make sure you are getting the right size replacement.

1. Measure the Spindle Length

It is essential to get the spindle size right when replacing a window handle. This is because it could determine how tight or loose the handle is, and whether it locks correctly in the frame of the window. The spindle is a steel shaft that connects the handle to the lock in the frame of the window. The spindle is available in either the standard 8mm cross-section for industry or the older versions that measure 9mm. The modern industry standard is 8mm however this wasn't always the case. When buying a new handle it's essential to check the measurements.

Remove the handle. This is easily done by turning the handle into the open position and unscrewing two screws that hold the handle in place (which are often hidden behind plastic caps which must be removed). After removing the handle, take a measurement from the base of the handle to the end of the spindle. This will give you the measurement needed to buy a replacement.

There are a lot of choices when it comes to selecting the right window handle from sleek chrome that fits into modern homes to traditional brass with a burnished finish that looks great in restored Georgian rooms or even the more traditional Tudor cottages with curved monkey tail latches! There are many options, but the most important is to choose one that complements your home's style.

Espag handles are commonly used to uPVC window frames and are always the exact same size with a 43mm center. Cockspur handles vary between 58mm and 62mm however luckily there are replacements available for both sizes. Window handles from Cadenza are a different size again since they have an angled blade which operates with a multi-point locking mechanism within the window.

When choosing a window handle take into consideration the hand you use to open your door. Inline Espag window handles aren't handed and can be used on either left or right handed windows. Cranked window handles can only be used on windows that open in one direction.

2. Take the handle off

A window handle that is sagging can be frustrating, regardless of whether the handle has been damaged or worn out. The good news is, you can repair the uPVC handle by yourself. All you need are the most basic tools and some time to complete the job.

First, you have to open the window and make sure that it is in an unlocked position. Then, you need to remove the screws that hold the handle in place. Once these caps are removed, you are able to work on removing the handle itself.

The handle is attached to a spindle within the window frame. Depending on the kind, this is held in place by a screw or a pin. The most commonly used types of handles are inline Espagnolette handles and handles with cockspurs. Both types of handles are available on casement windows, as well as aluminium ones. They can be locked using keys to stop unauthorised opening of the window from the outside or you can lock them by turning the handle clockwise.

To take the handle off, you will need to use a screwdriver with a flat blade to loosen the clip that holds the handle in place. Once the clip is released, the handle should be able to slide off the spindle. After the handle has been removed, you will have to determine the length of the spindle to ensure that your new handle is compatible with this size.

Once you have decided on the correct size for the handle, you can screw it into place. You will need to ensure that the new handle is firmly secured and that it is turning in the correct direction (clockwise for open or counterclockwise for closed). It is also crucial to ensure that it has not been installed upside down.

Replace the screw caps. Once you've completed this step, you can test your handle to make sure it is working correctly. You can also test the locking mechanism by moving the handle from an unlocked position to the locked and back.

3. Take the Screws off

A uPVC handle is an important element of any home and is the first thing that shows signs of wear or damage. This could be due natural factors, regular usage, or even deliberate damage by criminals trying to gain access to your home. But, a simple fix can easily solve the problem and stop the issue from occurring again.

UPVC handles can be difficult to open when the locking mechanism isn't working properly. Most of the time, the issue is solved by replacing the multipoint lock instead of the entire handle and it's worthwhile to check this out since it can save you money.

Once you've removed your old handle, you'll have to take off the screws that were fixing it to the base. These screws are usually located on the inside of the handle base. It may be necessary to use a screwdriver in order to do this. Be cautious not to over tighten the handle since this could cause it to loosen.

You will then need to locate the fixing screws or pins that hold the new handle in the correct position. They will likely be located on the inside of the base of the handle and you'll need an screwdriver or a pair of pliers in order to remove the screws. If you want to replace them, you can do so by replacing the caps on the screw and test the handle to ensure it is working correctly.


When you're ready to install the new handle, simply line up the spindle with the cut-out in the window mechanism and screw it in the appropriate position. If you're looking to replace the screw covers ensure that the handle is in an open position and that the screws are securely secured. Once this is complete you're done and can enjoy your new window handle. I hope this will enable you to avoid the need for expensive window and door replacement services in the future. If you would like more help in this, or any other aspect of your uPVC windows do not hesitate to contact us.

4. Install the New Handle

If you're replacing a damaged handle or simply changing it, the process is surprisingly easy and can be accomplished in just a few steps. The first step is to determine the type of handle, measure its spindle and identify the tools you will need to complete the task. Safety is always the first priority when working with windows and tools. Be sure to follow the steps and ensure that you have the right handle for use.

To begin, locate the screws that hold the window handle in place. Remove these while holding the handle firmly to stop it from falling down and causing injury. After the screws have been removed, they can be placed in a safe spot to be replaced in the future.

After the handle that was used previously has been removed, you are now able to begin to install your new handle. It is important that the handle is fitted perfectly to ensure it works properly and locks the window in place. The next step is to slide the square metal bar at the back of the handle into the hole of your window mechanism, making sure it fits securely.

The last step is to replace the screws caps and then test the handle to ensure it is working. If you're not happy with the result or the window doesn't shut or open properly Contact our experts for help.

The majority of homes in the UK have uPVC windows, and as they are, a lot of them will need to be replaced in the near future due to damage or wear. The procedure is fairly simple and can be carried out by anyone with some experience in DIY. The most important factor in the success of the process is ensuring that you're using a handle that matches the window's dimensions and style. Contact our team if you are unsure about the type of handle that you need. They'll be able guide you through the choices.