20 Fun Facts About Upvc Door Handle Replacement Choosing the Right UPVC Door Handle Replacement

Replacing your upvc door handles is a relatively simple job however choosing the right handle can be a challenge. Modern double-glazed handles are equipped with spring cassettes, however older handles do not.

If the upvc handle on your multipoint lock is sloppy and floppy, there may be an internal issue. This article will address the various possible issues and their causes.

Handles that slide or droop

uPVC handles are susceptible to wear and tear. This is especially the case in older properties. A broken spring cassette inside the door lever is the most common cause of a floppy handle. This is caused by excessive force and the square spindle that holds the cassette may be dislocated or rounded.

The good news is that a uPVC door handle replacement is a fairly simple task and can be done in a matter of minutes. The first step is to take off the handle unit that was previously installed by removing the fixing screws visible on the back of the handle lever plate. After the handles have been removed, you can unscrew and replace the cassette.

There is a wide range of uPVC door handles to pick from on the internet and a lot of them are available in various finishes. The finish you choose will determine the life span of your handle as well as how it will be easy to clean. Finishes like PVD, Stainless Steel or Resista are designed to withstand corrosion and will last for up to 25 years.

After choosing a color or design, you can select the type of handle that you need. The most common types are lever and pad arrangement. Lever pads feature an inside lever and a paddle on the outside and are often employed as a security measure to prevent unauthorised access.

Then, take a measurement and note the dimensions of the handle you currently have. You will need to measure the PZ dimension which is the distance between the screw hole and the middle of your lever. It is also important to be aware of how long the handle is as well as the size of its keyhole. Once you know the measurements, you can then compare these to the handle size matrix to determine the appropriate replacement.

Broken springs

Over time, the handles of uPVC doors can get loose or wobbly and occasionally the spring cassette inside could break. These springs are used to align the handle lever in a horizontal position. Without them the doors won't lock properly.

Modern uPVC handles come with these cassettes built into the back plate. However older uPVC doors often have these springs built into the lock mechanism. This isn't something you can fix by yourself, but it's worth asking your locksmith to examine the issue as it could be the reason for the sagging uPVC handles.

The most common problem associated with uPVC handles is that they become loose over time. This is usually due to worn-out springs, which are easy to repair. This is usually caused by excessive handling of the handle. The square spindle of the handle wears down, which causes the springs to move.

To fix this you will need to open the door and remove the fixing screws at the back of the handle plate. This can be accomplished using a Philips screwdriver. After the screws are removed the handle can be taken off. The handle plates are then able to be gently removed. The old springs can be removed and replaced with new ones.

This is a crucial point to remember when purchasing a new handle. This measurement is referred to as the PZ measure and it is recommended that this is done using an instrument that is calibrated for accuracy.

After replacing the springs, you should be able to use the handle without any problems. However, it's always recommended to lubricate the internal mechanism to ensure that everything functions as it should do. This will not only ensure that your uPVC doors are as safe as they can be but also make them more comfortable to use for a long time.

Handles that slide around

Handles that slide are caused by many things. One of the most common causes is when the levers of the handle are not aligned with the lock. This is a problem that can occur on uPVC doors as well as composite doors. However, it's more evident on older doors since they are made of cheaper materials that don't stand up to the elements.

This issue can be fixed by a professional, who will re-align the handles and make sure they're in line with the door lock. They'll also examine the lock itself to determine whether there's anything that needs fixing. In many cases, a slight adjustment to the handle springs will solve this problem.

It's simple to replace your uPVC handle However, you must measure the handle that you are replacing to ensure that the new one is the correct size. You'll need to determine the distance between the two fixing screws and the size of the lever and key hole position. Then, make use of this uPVC handles size guide to locate a replacement for your home.

After you have made the measurements, you can remove the existing uPVC handle. It is usually a simple procedure and requires only an screwdriver. Once the screws have been removed, you'll need to remove the handle and then put in the new handle.

It's important to secure the door using an appropriate wedge prior to beginning. This will prevent it from closing during your work. After removing the handle, you can access the parts underneath the door that are causing the door to slip.

If you don't have time or the energy to complete this task yourself, an expert handyman from Fantastic Services can help. They will employ specialist lock picking techniques to unlock the doors without creating damage. Then, they'll replace the damaged handle and ensure that everything works exactly as it should.

window handles damaged

A damaged gearbox could cause the upvc handle to become stiff and lose its function. This can also prevent the lock from being able be opened using keys. This could be extremely dangerous and should be addressed as soon as possible. It is crucial to contact a locksmith if you are unable to resolve the problem yourself. They have the tools and know-how to complete the task correctly.

The first step is to take the handle from its cover plate. This can be accomplished using a screwdriver that has flat heads. After you have removed your handle, you are able to remove the middle screw that holds the cylinder in place. After you have removed the middle screw you'll be able to loosen the two screws which are holding the barrel. You can then remove the barrel out of the door. You'll have to open the door to accomplish this, so be sure that you have someone to assist.

Once you have removed your cylinder from the handle you can replace it with a brand new one. Make sure that the new cylinder has the same size as your old one. You could end up with an improperly aligned handle. This could cause various issues that could cause leaks and drips.


A lot of door handles made of upvc have slots that allow for adjustment. These slots can be used to tighten or loosen the handle. They are usually on the inside of the door, near where the handle is connected to the cylinder. Allen wrenches can be used to tighten the adjustment slots. After you have made the adjustments, you can put the handle back into place & screw it in. You can then test the handle to ensure it functions as intended.

If the door handle of upvc becomes floppy or loose when it is closed, it's usually an indication that the gearbox in the upvc has broken down or internal spring components are in the process of breaking down. This can cause the multipoint lock from upvc to fail, leaving your door open to intrusion. If this occurs, it is necessary to replace the gearbox. It will cost between PS145 and PS280 including labor.