5 Myths About Double Glazing Window Locks Repairs That You Should Avoid Double Glazing Window Locks Repairs

Double glazing window locks repairs are crucial to keep your home secure. A damaged hinge or handle could allow draughts into your property and make windows vulnerable to burglars.

Thankfully, it's easy to repair sluggish uPVC handles and locks without having to replace your door or window. Sometimes, cooling or lubricating the mechanisms will solve any problems.

Broken Glass

Over time, double-glazing window locks wear out. As this occurs, the handles may become difficult to open or even close. This can cause issues with ventilation and can also could pose a security risk. It's important that you get the window fixed as soon as possible.

Double glazed windows are made up of three or two panes of glass that have a gas in between to provide insulation, and an elastomer seal that holds the panes joined. The presence of condensation between the glass panes is usually an indication of an issue with one of the seals, and will need to be replaced. This will typically involve replacing just the one window pane and is a lot less expensive than replacing the entire window.

Condensation and cloudiness are usually the result of a broken seal on windows with double glazing. This could result from a range of reasons, such as air leaks or excess moisture in the home. When you first notice the issue, you need to call a double glazing expert to replace the seal and gas in your double-glazed windows.

It is possible to replace just one pane of double-glazed glass. However, this is not recommended without the help of a professional. It is necessary to have the proper tools and knowledge in order to perform the task safely. You could end up damaging the window frame or even your health if you try to do it yourself.

When a double-glazed windows is stuck, a lot of people use a crowbar in an attempt to open it. But, it usually causes the frame to be damaged and scratched. A window specialist can remove the handle and open your window without causing damage. They can also change the old window mechanisms into modern ones.

As time passes, window hinges will become stiffer and difficult to open, especially when the area is noisy. It is important to regularly grease the hinges of your windows with silicone spray. It is also essential to avoid closing the window too tightly or closing it using the handles, as this can harm the hinges as well as the lock mechanism.

Broken Sash

This is a frequent issue for older double glazing windows. If the upper sash has been ripped out of its pocket, it could be hard to lock it and open the window. This is usually because the pins are disengaged or a balance shoe is disconnected. It's crucial to understand the way your sash is installed before attempting to repair it.

This can be solved by removing the sash, and thoroughly cleaning it. This will also reveal if it's still a good fit. If not, add stoppers for sash to keep it in place. They can be bought online or at most hardware stores. After you've cleaned the sash you can put in the parting beads, and lubricate the pulley axles with a Teflon or silicone spray. It's a good idea label the weights prior to you remove them to make sure you can put them back in correctly.

Another common issue is a broken handle. It can be hard to tell if your windows handle is broken However, there are some indications. If the handle feels difficult to use or feels clunky or does not feel like it's secured to the wall, then it's broken.

It could be due to lack of use, or the handle may have broken or become detached. In some instances, the handle might be damaged inside and unable to be repaired however it's still worthwhile to try fixing it immediately you notice the problem.

It is possible to remove the hinges that connect the window sash to the frame to take it off. It can be a difficult job, so you'll need someone to help you hold the sash in place. After removing the hinges it is necessary to clean the surrounding area. It is also recommended to attach the hinges again and check the handle to make sure that it's working properly. If it doesn't then you should look into replacing it. This will make your window as secure as is possible.

Broken Handle

It is not common for a window handle to break or deteriorate over time. Therefore, it's crucial that any broken handles are repaired as quickly as possible to avoid lack of functionality and security issues.

Fortunately window handles are quite simple to replace. Unlike a sash, which requires multiple bolts to secure, a window handle is secured using one or two screws which makes it a straightforward DIY job for anyone with a little of know-how. It is essential to test the handle after it's been installed to make sure that it functions properly. This should include locking the handle and checking for gaps that might allow drafts to enter or allow potential thieves to gain access to your home.

The most common reason for a window handle that is broken is that it's simply worn down from repeated use. However the force or stress that is applied to it can also lead to broken handles. If you force windows to open, it may cause additional stress on the handle. This increases the risk of damage.

Other reasons for a broken hand could be due to poor maintenance and aging or design problems. Inadequate cleaning and lubrication can cause the handle to wear down early, which is usually due to dirt or debris that builds up over time. The handle could also be weakened because of improper installation or problems with alignment.

If the solutions mentioned above aren't working, the Tasker must gain access and remove the lock itself. This could mean taking the frame off, or 'breaking out' the window frame and the plastic bead (to give more wriggle room). The replacement lock can then be adjusted to match the profile of the uPVC handle. Once this is done, the new handle can be put back on and the procedure is complete. Tasker will provide you with an estimate for the cost of the repair if this is the situation.

Lock is faulty Lock

When window locks get damaged, it's vital to repair the issue as soon as possible. The reason is that a damaged window can lead to drafts and weaken security barriers, making your home vulnerable to burglary. Window lock repairs are typically minor, but it is recommended to contact a professional before the problem becomes more severe and costs you more money.

UPVC window locks have two different variations: espagnolette handles and the cockspur handles. The first utilizes an internal rod to operate the locking cams, which are shaped like mushrooms, which lock into window frame keepers. The latter has an attached handle to a spindle, which is inserted into the rod to activate the lock's mushroom-like locking cams that are also referred to as locking mushrooms. The latch of the lock then clips into the mortise on a window frame's catches.

Both types of UPVC windows locks are at risk for damage, particularly in older homes. This could happen when the sash is bent or misaligned, and it might even fall off. In these instances the lock should be re-installed to prevent the possibility of draughts and decrease in energy efficiency. Tasker can repair the broken lock for you, providing you with the peace of mind that your windows are safe from burglars.

A Tasker will examine your double glazing window and identify the problem. Once they have all the details, they'll set up their tools prior to coming to your home. They'll typically bring along a Phillips head screwdriver and needle nose pliers. wood glue, and fine-grit paper.

Tasker has to loosen the screws that hold both locks to the window frame if the sash isn't aligned properly. They'll then take the latch off and then fill the mounting holes with wood putty (if necessary) and sand the area until it's smooth with the rest of the window frame.


If double glazing repair near me is rusted they'll clean it using a wire brush or oil and then lubricate it with grease to ensure it's working smoothly. They'll also inspect the condition of the latch and reinstall it.

This user has nothing created or favorited (yet).