11 Methods To Completely Defeat Your Repairs To Upvc Windows Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not corrosion or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is essential to make sure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames that were previously in use very easily. However If windows with double panes are secured by internal beading, it will be more difficult to remove the existing panes and install new ones. In this situation you'll need to source some plastic spacers that will aid the new pane in being able to fit perfectly into the window frame.

If you are going attempt to remove the window panes by yourself, it is essential to wear the proper safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric and not onto the floor and could be trampled.

It's a good idea to tape the gap once the glass is removed. This will stop drafts and water from getting into your home until a professional is able to repair the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you might think about an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they can suffer from a variety of issues, including sliding. A sagging uPVC windows could cause issues with light, draughts, and even security. It is crucial to act as soon as you discover that your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sagging. First, you'll need to unblock the windows to access the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you are happy with the fit of your window, you can tighten screws to secure them in place.

If you can't reposition the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to lose their tightness. It is important to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen. The majority of the time, this is caused by screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need to shut the window and then perform an experiment fitting. The joint at the corners of the sash should align with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

It is important to act if you awake each day to find mouldy walls and wet floors. window repairs near me through windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a simple fix that can be accomplished by any DIYer who is competent. Based on the severity of the issue the caulking that was used up may require removal before a fresh layer can be applied. When it comes to uPVC repair, you must avoid over-caulking. This can make your window harder to clean and decrease its energy efficiency.

Check that any drainage holes have no debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more severe situations, you may have to replace the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to remember that if the leak originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. This can be easily fixed by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it blows open with a breeze. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. It's easy to replace a hinge on a window however it is simpler if you have someone to help hold the frame.

Make sure that the uPVC hinges open and close in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a particular manner or because of improper installation in the factory. Sending us photos through our website can often solve the issue. We are happy to offer suggestions.


Regular lubrication of the hinges is essential. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It also decreases the risk of a window getting stuck and stop corrosion. The ideal time to do this once a year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few different things. The hinges may also become unbalanced due to wear, creating an opening between the frame and sash. They can be repaired by giving them a good clean, but when they're beyond repair, it might be necessary to get them aligned or replaced. The second is the interlock, which is located on the hinge of the window, may be misaligned. Again, it is possible to give them a clean but in certain cases, it may be necessary to have them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. Installing high-quality weatherstripping can help stop draughts. Another option is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and will reduce the risk of draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. They can help keep cold air out and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security for your home with regular maintenance and repairs. However, it is important to recognize that windows last for a certain period of time and they may reach the point when it's more efficient to replace them than repair them. So, if you're experiencing issues with your Upvc windows, it's best to seek professional assistance as soon as you can.